yacht interior hinges

Your shopping cart is empty!

Marine Hinges

If you need to replace some marine hinges on your boat – you’ve come to the right place. SeaLux Marine Products offer a wide variety of replacement boat hinges – including butt, ladder, piano, concealed, take-apart, offset, covered, door and hatch hinges and more. Shop for all your brass and stainless steel marine hinges today and save more!

SeaLux Marine 3" x 3" Hinges with Cover Caps - 6 Fixing Holes - Mirror Polished 316 Stainless Steel (Pair)

Short sided stainless steel hinge with cover caps for a clean and modern finish. ..

SeaLux Marine 316 Stainless Steel 180 degree Flush Mount Hatch Hinge 2-3/4" x 1-5/8" for Boat, RVs (Pair)

Pair of SeaLux Marine 316 Stainless Steel 180 degree flush mount 2-3/4" x 1-5/8" Hatch Hinges for bo..

SeaLux Marine Boat Stainless Steel Heavy Duty Strap Hinge 7-1/8"x 1-5/8" (2 pieces)

Marine Grade Stamped 304 stainless steel for harsh enviromentSeaLux Marine Boat Heavy Duty Strap Hin..

SeaLux Marine Cast 316 Stainless Steel Heavy Duty Take Apart Removable Hinges (LEFT + RIGHT) for Companionway Door and Panels for Boats, RV

Constructed of Cast 316 Stainless Steel, with Highly Mirror Polish Finished. ..

SeaLux Marine Cast 316 Stainless Steel Heavy Duty Take-Apart Removable Hinges (2 LEFT SIDE) for Companionway Door and Panels for Boats, RV

Constructed of Cast 316 Stainless Steel, Heavy Duty, with Highly Mirror Polish Finished. ..

SeaLux Marine Cast 316 Stainless Steel Heavy Duty Take-Apart Removable Hinges (2 RIGHT SIDE) for Companionway Door and Panels for Boats, RV

SeaLux Marine Dia. 2-9/16" Round Hinges with Cover Caps - 6 Fixing Holes - Mirror Polished 316 Stainless Steel (Pair)

Round stainless steel hinge with cover caps for a clean and modern finish. ..

SeaLux Marine Grade Stainless Steel Mirror Polished Door Hinge 3" x 1.5" for Boat, RVs (Pair)

Pair SeaLux Marine Marine Grade corrosion-resistant hinges Stainless Steel 3" x 1.5" Door Hinge ..

SeaLux Marine Grade Stainless Steel Square Corner Door Butt Hinge 2" x 2" for Boat, RVs (Pair)

Pair SeaLux Marine Marine Grade corrosion-resistant hinges Stainless Steel 2" x 2" Door Hinge ..

SeaLux Marine Short Sided 2-1/4" x 1-1/2" (57 mm x 37 mm) Hinge with Cover Caps - 5 Fixing Holes - Mirror Polished 316 Stainless Steel

SeaLux Marine SS Short Side Hinge 2-1/8" x 1-1/2" for Locker / Hatch Door (Pair)

SeaLux Marine SS Short Side Hinge 2-1/8" x 1-1/2" for Locker / Hatch Door (Pair) ..

SeaLux Marine Stainless Steel Flush Mount 5-5/8" x 1-1/2" Large Round Side Door Strap Hinges (Pair)

Pair of Flush Mount Stainless Steel 5-5/8" large Round Side Door Hinge ..

SeaLux Marine Stainless Steel Offset Short Side 2-5/8" x 1-1/2" Hinges (Pair)

Pair SeaLux Marine Stainless Steel 2-5/8" x 1-1/2" Offset Short Side Hinges ..

SeaLux Marine Stainless Steel Top Mount 5-5/8" x 1-1/2" Large Round Side Strap Hinge (Pair)

Pair of SeaLux 5-5/8" x 1-1/2" Large Round Side Strap Hinge ..

Free Shipping on orders over $120!

Expert Support: 888-250-8133

Your Most Trusted Source for Hinges and Hardware

• Accessories
• Instructions
• Door Hinge Guide
• Gate Hinge Guide
• Cabinet Hinge Guide
• Ultimate Guide to Hinges

Ball Bearing

Butt Hinges

Residential Spring

5/8" x Square Corner

Commercial Butt

Commercial Spring

Security Hinges

Stainless Steel Hinges

Double Action

Concealed Door Hinges

Screen Door

Wholesale Door Hinges

Door Locks, Knobs, Levers, and Deadbolts

Additional Door...

Barn Door Hardware

Bifold Door Hardware

Pocket Door Hardware

• Storm Door Closers
• Thresholds for Doors
• Weatherstrips for Doors

Shop All Door Hinges

Adj. Gate Spring Hinges

Weld-On Gate Hinges

Strap Hinges

Commercial Spring Hinges

Double Action Spring Hinges

Heavy Duty Strap Hinges for Gates

Heavy Duty BadAss Weld-On and Bolt-On Hinges

Heavy Duty Locinox Gate Closers and Hardware

Gate Locks and Latches

Safety Gate Latches

Farm Gate Hinges

Bullet Hinges

Coded Gate Locks

Shop All Gate Hinges

Overlay Cabinet Hinges

Self-Closing Cabinet Hinges

Blum Cabinet Hinges

Concealed Cabinet Hinges

Full Inset Cabinet Hinges

3/8" Offset Cabinet Hinges

Demountable Hinges

Butterfly Cabinet Hinges

Small Butt Hinges

Lid Support and Stays

Drawer Slides

Cabinet Catches

Knife Hinges

Cabinet Knobs

Cabinet Pulls

Shop All Cabinet Hinges

Heavy Duty Hinges

Commercial Ball Bearing

Weld On Hinges

Wide Throw Hinges

Swing Clear Hinges

Locinox Gate Closers

Pivot Hinges

Concealed Hinges

Piano Hinges

Heavy Duty BadAss Hinges

Door Closers

Electrified Hinges

Commercial Locks

Clearance Hinges

Lid Support Hinges and Stays

Furniture Hinges Table and Mirror

Marine Hinges

Parliament Hinges

Shutter Hinges

Torque Hinges

Continuous Geared Hinges

Lift Off Hinges

Refrigerator Hinges

Trailer Hinges

Shop Clearance Hinges

Wood Hinge Screws

Machine Hinge Screws

Door Installation Hardware

Door Stoppers Chocks and Silencers

Toolbox Bundles

Ball Catches and Strike Plates

Flush Bolts

Handrail Brackets

Hinge Jigs and Templates

Weatherstripping for Doors

Door Thresholds

Stainless Steel Eye Bolts

How to Choose the Right Marine Hinges for Your Boat

When it comes to boat construction, every detail matters.

Marine hinges are a small but significant component of your boat's overall construction, ensuring the functionality, durability, and safety of various parts of your vessel.

Marine hinges are the pivot point for your boat's doors, hatches, cabinets, and other moving parts. They provide stability and allow for smooth opening and closing motions while withstanding the harsh marine environment. 

Without high quality hinges, these components can become loose or misaligned over time, compromising functionality and potentially causing damage.

Whether building a new boat or refurbishing an existing one, choosing the right marine hinges is essential to ensure optimal performance.

How to Choose the Right Marine Hinges

Consider the following factors when choosing marine hinges:

1. Material and Durability

Marine hinges are exposed to corrosive elements such as saltwater, humidity, and UV rays, so selecting hinges made from materials that can reliably withstand these harsh conditions is essential.

Stainless steel is the best option for marine hinges due to its corrosion resistance. Hinge Outlet offers multiple marine-grade stainless steel hinges, including grade 304 and 316 stainless steel.

Grade 316 stainless steel is the most widely used marine-grade stainless steel option because it has the highest corrosion resistance.

2. Size and Weight Capacity

Matching the hinges' size and weight capacity to your boat's specific requirements is crucial. 

To determine the appropriate size of marine hinge needed for your boat, you should determine the size and weight of the doors or hatches they will be attached to. 

Consider door thickness, width, height, and anticipated load-bearing requirements.

Don’t forget to assess other exposure factors, such as powerful winds and turbulent waters.

Choosing too small hinges or with a lower weight capacity than necessary can result in hinge failure, leading to potential safety hazards and costly repairs.

3. Type of Hinge

Different marine hinges have specific applications and functions, so choosing the appropriate type is crucial for optimal performance.

When selecting the type of hinge for your boat, consider factors such as door or hatch design, anticipated usage frequency, load-bearing requirements, and aesthetic preferences.

Some common types of marine hinges include:

Butt hinges

Butt hinges are one of the most commonly used hinge types in boat construction due to their simplicity, strength, and reliability. 

They consist of two plates connected by a pin, allowing doors or hatches to swing open and closed.

However, butt hinges have a limited range of motion compared to other hinge types, which may restrict access in certain situations.

Security hinges

Security hinges are equipped with a non-removable riveted pin or a security tab, making them tamper-proof and perfect for added security.

Strap hinges

Strap hinges feature a long strap attached to both the door or hatch and the frame, providing excellent support and load-bearing capabilities.

These hinges offer a wide range of motion and can be easily adjusted to achieve the desired opening angle.

Installation and Maintenance Tips

Proper installation and maintenance of marine hinges are crucial for ensuring the longevity and functionality of your boat. 

By following these tips, you can ensure that your marine hinges are installed correctly and well-maintained, allowing for smooth operation and preventing unnecessary wear and tear.

Installation Tips

Surface prep

Begin by smoothing and cleaning the surface with a wire brush or sandpaper. Wipe away any residue produced by this process.

Hinge alignment

Mark your desired mounting spot with a pencil for easy guidance when drilling holes for your marine-grade screws .

Drill pilot holes

Carefully drill pilot holes at each marked location using an appropriately sized drill bit. Make sure to choose a drill bit size that matches the diameter of your screws.

Attach the hinge

Place the hinge back onto the mounting surface and align it with the pilot holes. 

Securely fasten it using screws or bolts specifically designed for marine applications. 

Be careful not to overtighten, as this can cause damage or misalignment.

Check the alignment

After installation, ensure the hinge operates smoothly without any binding or misalignment issues. If necessary, make adjustments by loosening screws slightly and repositioning as needed.

Maintenance Tips

Routine inspection

Regularly inspect your marine hinges for wear, corrosion, or damage. Check for loose screws, cracked welds, or any other issues affecting their functionality.

Cleaning and lubrication

Clean the hinge surfaces with mild detergent and water to remove dirt, salt residue, or other contaminants. 

After cleaning, apply a marine-grade lubricant to the hinge pins and moving parts to ensure smooth operation.

As a general guideline, it is recommended to inspect and lubricate your marine hinges at least once every boating season or more frequently if necessary.

Repair and Replacement

Repairs and replacements may be necessary after years of use, even with well-maintained hinges. 

By following these tips for installation and maintenance, you can ensure that your marine hinges remain in optimal condition, providing reliable performance and enhancing the overall functionality of your boat. 

The following are signs that your hinges require repairs or total replacements:

1. Excessive wear and tear

Certain signs of wear and tear can lead to dangerous situations, so it’s important to immediately repair or replace broken pins, loose joints, or worn-out welds.

2. Corrosion

Marine environments can be harsh on metal components, leading to corrosion over time. If you observe rusted or corroded hinges that cannot be adequately cleaned or lubricated, consider replacing them with corrosion-resistant alternatives.

Replacing marine hinges

Choose quality replacements  

Select high-quality marine hinges made from durable materials such as stainless steel that offer excellent resistance against corrosion and withstand harsh marine conditions.

Follow proper installation techniques  

Follow the steps outlined earlier in this section to ensure proper installation of the new hinge.

Regular inspection, cleaning, lubrication, and timely repair or replacement will help extend the lifespan of your marine hinges and contribute to a safer and more enjoyable boating experience.

Benefits of Choosing the Right Marine Hinges

Selecting the right marine hinges for your boat can bring many benefits, from enhanced safety and functionality to improved durability and longevity. 

1. Safety and Functionality

One of the primary benefits of selecting the right marine hinges is enhanced safety and functionality. 

Marine hinges are crucial in various aspects of boat construction, including cabin doors, hatches, storage compartments, and engine compartments. 

You can ensure these vital components operate smoothly and securely by choosing sturdy and reliable hinges.

With a properly functioning boat, you, your crew, and your guests will stay safe from potential injury and hazards.

2. Durability and Longevity

Boating exposes vessels to harsh environmental conditions. Inferior quality hinges may corrode or weaken over time due to exposure to these elements, compromising their structural integrity. 

However, by opting for marine-grade hinges made from corrosion-resistant materials like stainless steel, you can ensure they withstand these challenging conditions without deteriorating. 

This increased durability means a longer lifespan for your boat's essential components.

3. Lower Maintenance Costs

Furthermore, choosing the right marine hinges can help reduce maintenance and repair costs associated with your boat. 

When inferior quality hinges fail or break prematurely, it often necessitates costly repairs or replacements. These unexpected expenses can quickly add up over time.

Investing in high-quality marine hinges upfront can avoid frequent repairs or replacements.

Investing in high-quality marine hinges designed explicitly for unique boating demands can ensure optimal performance and reduce maintenance and repair costs in the long run.

Final Thoughts

Selecting the right marine hinges for your boat offers numerous advantages to a safer, more functional vessel. 

By prioritizing material quality, corrosion resistance, and design suitability, you can ensure optimal performance and longevity for your boat's essential components.

If you’re ready to choose the right marine hinges for your boat, contact Hinge Outlet today to place an order and reap the long-lasting advantages of high-quality hinges.

Free Shipping over $120

Trusted source since 2005

Call 888-250-8133 For Assistance

Please verify you are a human

Access to this page has been denied because we believe you are using automation tools to browse the website.

This may happen as a result of the following:

• Javascript is disabled or blocked by an extension (ad blockers for example)
• Your browser does not support cookies

Please make sure that Javascript and cookies are enabled on your browser and that you are not blocking them from loading.

Reference ID: 9e765455-042a-11ef-b68a-e0d8f79aeac9

Powered by PerimeterX , Inc.

Just added to your cart

Men’s long sleeve swordfish shirt.

Free ground shipping on all retail orders!

• New Products
• Accessories + Apparel
• Outrigger Systems
• Deck Hardware
• Dredge Boom System
• Installation Tools
• Rod Holders
• Steering Wheels
• Boat Accessories
• Gulf Stream Outrigger System
• Bluewater Outrigger System
• Deluxe Outrigger System
• Coastal Outrigger System
• How to Illustrations
• Rigging Kits
• Outrigger Accessories
• Hasps & Catches
• Hawse Pipes
• Lift Handles and Cabinet Pulls
• Skene Chock
• Slide Latches and Barrell Bolts
• Hose & Wire Management
• Livewell System
• Intake Screens
• Tools & Accessories
• Drain Plugs
• Deck Drains
• Ball Valves
• Adaptors & Fittings
• Composite Valves
• Load Bearing Collars
• Bluewater- Heavy Duty
• Rod/Cup Holder
• View Sale Items

Choosing The Right Boat Hinges and Latches For Your Boat

If you're like most new boat owners, you're looking forward to spending many happy hours on the water, and naturally, you plan on taking the best possible care of your vessel — and this means meticulous attention to functionality as well as looks. Well-cared-for vessels don't just show it on the surface. Even small components without high visibility, such as marine hardware like hinges and latches, are chosen with both appearance and performance in mind. If it's time to replace your boat hinges and latches, you may be wondering how to make the best possible selection. Here's what you need to know about choosing marine hinges and latches:

Why Quality Marine Hardware is Important

Hinges are used in a variety of ways on the average boat. For instance, they're used on storage hatches, doors, galley cupboards, bait wells, and anything else that opens and closes on the vessel. Top-quality hinges are essential on boats because doors and lids that suddenly slam shut unexpectedly create inconveniences and pose potential safety hazards, especially when the vessel is in motion on the water. Latches are used to secure doors, gates, and cupboards and create risks when not working properly.

Hinges, latches, and other hardware used in a marine environment should be durable, sturdy, and hold up well to environments with lots of moisture. Plus, if you'll be using your boat in the ocean or a saltwater lake, the best boat hinges and latches should also be resistant to corrosion. Corrosion occurs during interactions with salt and certain metals. It can weaken boat hardware to the extent that it can actually break off if the vessel isn't retrofitted in time – not to mention it can present an unsightly appearance as rust takes over. Fortunately, not all marine hardware is the same, and some materials don’t succumb to the ravages of rust as easily as the others.

Why Stainless Steel Hinges Are the Best

The best type of hinges for your boat are made from stainless steel. Even if you live in a part of the country that doesn't have a great deal of atmospheric humidity, your boat hardware is still at risk of developing corrosion and other types of damage simply because it's exposed to water on a regular basis. Stainless steel is corrosion-resistant because it has a thin layer of chromium oxide on its surface that acts as a natural barrier to rust development. As an added benefit, stainless-steel fixtures and components are easy to clean and provide an appealing aesthetic element. Keep in mind that even if you live near the coast but only plan on using your vessel in nearby freshwater lakes and rivers, you will still be dealing with the effects of large amounts of salt in the air. Latches made of stainless steel provide the same benefits as hinges made with this material.

The Benefits of Friction Hinges

Friction hinges help ensure that hatches, doors, and lids won't suddenly snap shut. Also known as torque hinges, friction hinges keep doors, covers, and lids open at the desired angle through friction. This lets you keep your bait box, for instance, halfway open so that you can easily access bait when you need it without having to risk injury to your hands and fingers as the result of the lid suddenly closing.

Electropolished Stainless-Steel Hinges

At Gemlux , our stainless-steel hinges come with an extra layer of protection against the elements thanks to a process known as electropolishing. An ultra-smooth surface is produced with a mirror-like finish that provides even more corrosion resistance. We have more than 5,000 types of hinges to meet any vessel's needs, including a wide array of friction hinges. Other options include top-mount hinges, marine flush hinges, 108-degree hinges, swaged mount hinges, and several types of miscellaneous hinges manufactured with electropolishing technology.

Custom Made Latches

We also offer custom boat latches specially made to fit the cutout holes rather than the faces of the latches themselves, which offers a much more precise fit. Our latches are also manufactured from stainless steel, engineered to outperform other latches, and provide optimal durability, functionality, and appearance. We offer compression, slam, and lift-and-turn latches in various sizes, shapes, and configurations, as well as locking hatches to provide you with a little extra security on your charters.

Please feel free to contact us with any questions you may have about how we can help your charter business succeed. With over 60 years of experience providing commercial and private vessels with the best available marine hardware, we bring a strong commitment to our customers and stand behind every product we sell.

• Share Share on Facebook
• Choosing a selection results in a full page refresh.
• Press the space key then arrow keys to make a selection.

JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

• Check Order Status
• Shop By Brands

FREE SHIPPING on orders above $99.00

• Applies to standard shipping only within the contiguous United States.
• No coupon code required.
• Create an Account
• Compare Products

How to Replace Your Boat Hinges

• Blog | Marine Depot Direct

Boat hinges can be one of the most important parts of your boat, so when they stop working properly, it's important to know how to replace them. Replacing boat hinges can help you save money by extending the life of your boat! In this article, we cover the basic steps for replacing the hinges on your boat.

Before you begin, you'll need to make sure that the screws are set up correctly, or else they could easily strip. The best way to do this is with a torque wrench. If you're not using one, just be careful not to overtighten the screws when installing them into place.

If it's been awhile since your hinges were replaced, chances are good that some of their screws may have become stripped over time and will need replacing before proceeding with installation. You can buy new bolts at most hardware stores, but if you want something strong (and less likely to rust), consider stainless steel fasteners.

Quick tip: When removing old hinges from a boat hatch or door frame, remove all existing fasteners from both hinges and gently pry off old metal plates from each hinge shaft by inserting small flathead screwdriver between metal plate and shaft - gently pry toward center until able remove plate completely.

Tools Needed

- A socket wrench is necessary to get the new hinges on.

- A screwdriver is necessary to remove the old ones.

- New hinges are needed to replace the old ones.

Step 1: Secure the boat hatch, cupboard, or door in place with a strong object, like a brick.

In order to protect yourself from injury, it is important to make sure that the boat hatch or door stays in place while you are working on it. The best way to do this is by using a strong object, like a brick, placed directly over the hinge.

You should not use your hand as an anchor because accidents can happen and fingers can get injured during installation. It is also important not to use a hammer or screwdriver for this step since they could easily damage the wood around them if they slip or slide out of place when trying to pry open the latch bolt without having enough leverage on it.

Step 2: Remove the old hinge by loosening the screws and removing it from the door.

Once your hinges are exposed, you'll need to loosen the screws and remove them from the door. This may require a screwdriver or other tool depending on how large your hinge is and how tight its screws are. Be careful not to damage your boat or hatch while doing this, as it's important that you keep everything in good condition so that you don't have problems later on down the line.

Step 3: Install the new hinge in reverse of removal.

Install the new hinge in reverse of removal. First, make sure the hinge you purchased matches perfectly with the one you are replacing. This is important because if the mounting holes don’t line up properly, you may have to return these hinges and purchase ones that do OR drill new holes in your boat to accommodate the difference. Most boaters will agree in avoiding drilling new holes in your boat all together, and having to purchase new hinges will only delay the project and cause an inconvenience. Check to make sure the hinge is level and secure. Tighten down the screws. Don't over tighten the screws, you can strip them out.

Step 4: Install an additional hinge if necessary to support the weight of the door or hatch.

If you need to support the weight of your door or hatch with an additional hinge, install one on the opposite side of your existing hinge. Make sure that this new hinge is installed on the same side as your existing one so they pull in opposite directions and evenly distribute the weight of your door or hatch.

Take a drill bit that matches your screws' diameter and cut two holes into either side of the center panel where you want to mount your extra hinge(s). Then use a screwdriver to attach them with screws provided with your hardware package.

Step 5: Test your installation to ensure it has been properly installed.

Test your installation, slowly opening and closing the door or hatch several times, then tighten it down. If you are still having trouble, remove the hinge again and tighten it further with a screwdriver until the hinge feels tight when tested on all four corners of the hull.

Step 6: Don't forget to lubricate the hinge once you're satisfied with your installation.

Once you have successfully installed your new hinge(s), don't forget to lubricate them. Lubrication is essential for proper operation of any hinge. Most manufacturers recommend light oil or grease, however silicon-based lubes should be avoided as they can attract water and corrosion.

Petroleum-based lubricants like motor oil and WD40 are also not recommended because they will attract water, which can lead to rusting on the boat hinges. For most applications, we recommend light teflon-based aerosol spray lube such as Armor All or Turtle Wax Teflon Spray Lube.

Key Takeaways

Boat repair is not terribly complicated once you get used to it, but always practice safety first! Avoid injury by being careful and taking breaks as needed. Don't overwork yourself or try to do too much at once. When replacing your boat hinges and other hardware, be safe and have fun!

If you are looking to replace your boat hinges, browse the large selection of stainless steel hinges available at Marine Depot Direct. We also carry a wide variety of other marine grade stainless hardware and replacement parts to upgrade your boat!

We hope you found this article helpful in learning how to replace your boat hinges. If you have any questions or concerns about this project, please contact us directly. Good luck!

Creating an account has many benefits: check out faster, keep more than one address, track orders and more.

Beautiful hardware manufactured to please.

• Yacht Hardware

Charged with the task of designing yacht hardware, NANZ creates products from both non-ferrous brass and steel, with mechanisms that are engineered for durability.  A wide variety of finish options are available to suit marine environments.

Below are photos of a recent project: the newly restored superyacht, Malahne   by our friend,  the designer  Guy Oliver of Oliver Laws , with whom we developed some bespoke hardware for the project. Read  the full story at Boat International Magazine .

• Collections
• Butt Hinges
• Olive Knuckle
• Harmon Hinges
• Concealed Hinges
• Self Closing Hinges
• Crystal Knobs
• Transitional Knobs
• Modern Knobs
• Ornate Knobs
• Transitional Levers
• Modern Levers
• Lift & Slide Levers
• Fixed Pulls
• Entry Locks
• Narrow Backset
• Extended Backset
• Interior Locks
• Privacy Locks
• Passage Latches
• Latches & Catches
• Pocket Door Locks
• Marine Grade
• Fire Rated Locks
• Occupancy Indicators
• Lockset Installation
• Keyhole Plates
• Cylinder Collars
• Escutcheon Plates
• Push Plates
• Escutcheons
• Catches & Latches
• Multi-Point Profile Cylinders
• Manufacturers
• Pocket Door
• Screen Hardware
• Electrical Plates
• Miscellaneous
• Installation
• The Orange Book
• Chasing Finishes
• Wood Hardware
• Leather Hardware
• Powder Coating
• Why Choose Nanz
• Order Management
• Manufacturing
• Green Initiative
• For Distributors
• For Developers
• Custom Work
• Basin Faucets
• Tub Fittings
• Shower Fittings
• Bath Accessories

Add to Portfolio

Choose portfolio.

Requesting PRICING

PURCHASING product,

SHARING product,

ORGANIZING product for future use.

Confirm Delete

Are you sure you want to delete this portfolio.

• Handle Sets
• DROP RING PULLS
• RECESSED PULLS
• DOOR KNOCKERS
• Cabinet Knobs
• FIXED PULLS
• Finish Samples
• Transitional
• Drop Ring Pulls
• Olive Knuckles
• Offset Pivot
• Self Closing
• Surface Bolts
• Emergency Releases
• Curtain Tiebacks
• Casement Fasteners
• Casement Stays
• Tilt & Turn Window
• Profile Cylinders
• Compatibility
• Thumb Latches
• Bell Escutcheons
• Address Numerals
• American Revival
• Bar Faucets
• Hand Sprayers
• Watercloset
• Accessories
• Plumbing Finishes
• Avant Garde
• Catches and Latches
• Green Tones
• Vibrant Tones
• Neutral Tones
• The Library

Sign up now for our WhatsApp newsletter and receive a FREE SVB set of playing cards!

Get the latest SVB news via WhatsApp and/or SMS!

• Spare parts
• SVB@Youtube
• My SVB Account
• Compare list

Are you missing items that you have already placed in your shopping cart? Log in to see your saved items.

• Equipment/Interior

BAVARIA YACHT Hinges

Best ratings

„Excellent quality product. Precise measurements“

„As advertised“

„.“

NEW: Worldwide UPS Express Shipping

Bookable directly in SVB Check-Out!

Customer ratings & reviews

Konstantinos P. on 26.04.2024

Very good tradition very good product

Magnus M. on 26.04.2024

Janko S. on 26.04.2024

Till now always OK

Log in or Sign up

You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser .

mikewheels New Member

Does anyone know where to get the hinges for the interior cabinet doors?

AlfredZ Senior Member

Try westmarine. Cheers, Alfred

mwwhit1 Senior Member

Google around a bit. These match what I have: Brass / Chrome Cabinet Hinges I doubt they are marine so cabinet hardware sites probably carry them too.

NYCAP123 Senior Member

Most of the interior cabinet hinges I've run into are standard kitchen type (mostly the European style on newer boats), available on-line or at most hardware or kitchen and bath suppliers.

bigg1069 New Member

hinges They are amerock hinges model 7697 I searched the internet and found them. I'll try to find my reciept for the name of the store.

Post cabinet hinges Thank you for the info on the hinges, I will look into Amerock.

PtJudeRI Senior Member

I know this is an old thread, but I figured I would update in case anyone is in search. Amerock is no longer supporting the 06L hinge that is in many of Post's cabinets. A few companies seem to have cross reference hinges, Blum. Grass and Liberty, but if you want that exact hinge, you can contact Stan the Old Hardware man. <-- Google it. He has the cups, but the two screw hanger that my Post has are all gone. so, that means that I have to switch to a 1 screw design, that Im not thrilled with, but its better than re-routering the door hole. Just FYI. The part for my 50' is an Amerock 06L 3/4 overlay 2010 - 31 cup.

Capt J Senior Member

Since you're in WPB, try Seafarer Marine in Fort Lauderdale, they stock lots and lots of interior hinges.

Thank you for the help with the hinges, I will look into these suggestions.

• No, create an account now.
• Yes, my password is:
• Forgot your password?

Flotilla Radisson Royal

• See all photos

Most Recent: Reviews ordered by most recent publish date in descending order.

Detailed Reviews: Reviews ordered by recency and descriptiveness of user-identified themes such as wait time, length of visit, general tips, and location information.

Flotilla Radisson Royal - All You Need to Know BEFORE You Go (2024)

• Skyscrapers
• Apartments for Sale
• Apartments for Rent
• Houses for Sale
• Houses for Rent
• Luxury Real Estate
• Mansions in Russia
• Palaces in Russia
• Watch Video
• Residence permit in Russia

Moscow-City – The Moscow International Business Center

• 3 years ago

Moscow-City is an iconic location for life and work in Russia’s capital. Enormous skyscrapers, business centers, the best restaurants and retail spaces – all this is concentrated in one place. The ultramodern Moscow-City towers are truly striking in their outward appearance, and the layout of the apartments inside and the fantastic views that can be seen from the higher floors are nothing short of impressive.

This skyscraper compound, often referred to as Moskva-City, is the Russian take on Manhattan, where businessmen strike multi-million dollar deals daily while ordinary life goes on next door. Its state of the art spaces offer the ultimate convenience. The infrastructure of this business district is so well-developed that anyone can find something interesting for themselves here: from residential apartments to boutiques, clubs, exhibitions and more.

When the foundations for the Moscow-City skyscrapers were laid, a special kind of concrete was used, the properties of which are amplified by many times compared to standard concrete. Even in the event of a plane crashing into one of the buildings, the structural integrity of the towers will be preserved.

The architects of the Moscow-City Business Center have created a unique locality that has integrated into itself the hub of the capital’s business life and a whole ensemble of historical monuments. Anyone can admire the beauty of these skyscrapers from within or without the compound. There are also a number of apartments for sale or rent available in the MIBC itself. But first, let’s have a look at some more interesting facts about the financial core of Russia’s capital.

• 1 How It All Began
• 2.1 Moscow-City Central Core
• 2.2 Tower 2000
• 2.3 Evolution Tower
• 2.4 Imperia Tower
• 2.5 Moscow Tower and St. Petersburg Tower
• 2.6 Steel Peak Tower
• 2.7 Federation Tower
• 2.8 Mercury City Tower
• 2.9 OKO Tower Complex
• 3.1 Afimall City Shopping Center
• 3.2 Bagration Bridge
• 3.3 Expocentre Fairgrounds
• 4 Renting and Buying Real Estate in Moscow-City

How It All Began

The history of Moscow-City goes all the way back to 1992. The government of Moscow at the time wanted to bring into existence its own skyscrapers like the ones in London or New York. And the idea caught on. In 1992 the project for the construction of the huge “Moscow-City” MIBC compound was enthusiastically approved, kick-starting the painstaking preparatory works. The original intention was that the skyscrapers would only house office space. However, as time went on, the towers began to welcome in ordinary residents who wanted to live on the territory of this business and finance hub.

Moscow-City is undoubtedly a city within a city. Its grandeur is mind-boggling. It is perfect in every way: from location to infrastructure. And today, anyone can get a feel of the atmosphere of the “capital city” of Russia’s business world – many of the apartments in Moscow-City are available for rent. Any citizen of Russia and even nationals of other countries can make use of these offers.

What It’s Like in 2021

Today Moscow-City is not just a magnificent and fascinating sight, but also a real hub for the work, life and leisure of thousands. Its infrastructure is organized in such a way that there is no need to leave the territory of the “city within a city” at all. This business district contains everything one may need for work and recreation. And if one does decide to venture out into the larger metropolis, the MIBC’s three subway stations make this remarkably simple to do.

Moscow-City stands on the Presnenskaya Embankment . Each of the buildings in the district has a name, which simplifies its identification. Some of the buildings form complexes that are united under one name, such as the Neva Towers and the Naberezhnaya Tower complex of two skyscrapers and one high rise. There are a total of 16 towers in the MIBC, of which the most popular are:

• Moscow-City Central Core;
• Tower 2000;
• Evolution Tower;
• Imperia Tower;
• City of Capitals (Moscow Tower and St. Petersburg Tower);
• Steel Peak Tower;
• Federation Tower;
• Mercury City Tower;
• OKO Tower Complex.

Moscow-City Central Core

This is the most complex building within the MIBC compound. Its total floor area is a whopping 1 476 378 sqft (450 000 m²). It consists of two massive parts, each of which boasts a truly impressive infrastructure. The underground part includes 3 Moscow Metro stations, a parking lot for automobiles and a shopping mall. The aboveground part houses a concert hall and a hotel.

Tower 2000 is a skyscraper having 34 stories. Its total floor area is 200 318 sqft (61 057 m²), most of which is office space. The key feature of this skyscraper is its direct connection to the Bagration Bridge, which has its own shopping arcade. The tower has everything one may need while working here, including a large parking lot and several restaurants.

Evolution Tower

This elegant structure is 836 feet (255 m) high – that’s a whole 54 stories! The total floor area here is 554 462 sqft (169 000 m²). The Evolution Tower’s key feature is that it has its own Wedding Hall. This skyscraper houses large office spaces, a parking lot and several restaurants.

Imperia Tower

MIBC’s Imperia Tower is the undeniable focal point of the MIBC’s business life. Its height is 784 feet (239 m), which means one can hold conferences and resolve key business matters on the 59 th floor! And that really is amazing! The tower has everything: offices, hotels, restaurants and parking lots. But if you want a truly unforgettable experience, visit the viewing platform! It is situated on the 58 th floor and a simply astounding view of Moscow can be seen from it.

Moscow Tower and St. Petersburg Tower

The Moscow and St. Petersburg Towers are the chief representatives of the MIBC. The Moscow Tower has 76 stories and is 990 feet (302 m) high, while the St. Petersburg Tower has 65 stories and stands 843 feet (257 m) tall. Both towers offer fantastic views of the capital city.

Most of the floors of these two skyscrapers are taken up by luxurious sky apartments. There are also several recreational and entertainment centers, office spaces, restaurants, etc.

Steel Peak Tower

Also known as the Eurasia Tower of Moscow-City, this supertall skyscraper has a total of 680 912 sqft (207 542 m²) of floor space. Most of this is taken up by offices, and the rest – by residential quarters (around 65 616 sqft or 20 000 m²). The tower also houses a number of the greatest restaurants, studios and shopping centers.

Federation Tower

The Federation Tower is a complex of two skyscrapers, known as Tower East and Tower West. Tower East is the second highest building in Europe (the first is a skyscraper recently erected in the city of St. Petersburg). Its height is a colossal 1 223 feet (373 m) and that makes 95 stories! Tower West, on the other hand, is noticeably shorter at 794 feet (242 m).

The Federation Tower is a multifunctional complex.

Mercury City Tower

The Mercury City Tower skyscraper is widely known as one of the tallest buildings in Europe. Its height is 1 112 feet (339 m) and it has 75 stories. It is multifunctional by concept, holding within its walls shopping centers, offices and all kinds of other spaces. It is also possible to rent apartments here.

OKO Tower Complex

The OKO Tower Complex consists of two towers – the North Tower (49 stories and 803 ft or 245 m in height) and the South Tower (85 stories and 1 155 ft or 352 m in height).

Each of the MIBC’s tower complexes has its own recreational and entertainment areas, restaurants and parking lots. The top floors of most of these buildings contain luxurious fully-furnished apartments. At night, the towers shine with bright lights, while inside them the panoramic windows reveal astounding views of Moscow. This breathtaking view of the capital of Russia is why visiting Moscow-City is a must!

What Not to Miss

There are many interesting landmarks within the Moscow-City compound, but three of them are truly deserving of special attention:

• The Afimall City Shopping Center;
• The Bagration Bridge with two galleries and a shopping arcade;
• The Expocentre Fairgrounds.

Afimall City Shopping Center

The Afimall City Shopping and Entertainment Center is located in Moscow-City’s Central Core. It is divided into 4 zones, each with its own theme – one for every season of the year. The shopping center houses the biggest indoor fountain found worldwide. The height of this watery wonder is 118 feet or 36 meters.

The shopping and entertainment center contains everything one might expect from one of the largest centers of its kind:

• Retail brand stores;
• Exhibitions;
• Game rooms;
• and Restaurants.

The main recreational space is roofed with a giant transparent dome, which is an impressive sight to behold.

Bagration Bridge

Bagration Bridge with its upper and lower galleries has a shopping center all of its own and was the first structure to be built as part of the Moscow-City business district. Its lower gallery is a shopping arcade and its upper gallery is an open-air viewing platform with a spectacular view of the MIBC and the Moskva River. The hall of the bridge houses the 23 foot tall sculpture called “Tree of Life”. Having gone through the bridge via either one of its two galleries, a pedestrian would find themselves standing right on the Kutuzovsky Prospekt.

Expocentre Fairgrounds

The Expocentre Fairgrounds exhibition venue is located at the very heart of the capital. The first exhibition held at the Expocentre happened all the way back in 1959, much earlier than the MIBC was erected. Today it is the venue of many interesting events.

Exhibitions with very diverse themes are regularly held at this complex. An up-to-date schedule can be found on the official webpage of the Expocentre. The events can be free or fixed-price entry, depending on their type.

Renting and Buying Real Estate in Moscow-City

Moscow-City is not only a work and business hub, but also a residential neighborhood. Any citizen of Russia can rent or buy apartments or elite sky lounges here. The variety of residential real estate available inside the skyscrapers is impressive, including options for any pocket. The following buildings in the MIBC contain residential blocks:

This skyscraper has a mirror glass façade which reflects the passing clouds. Just imagine how beautiful that looks! Anyone can buy an apartment in the Federation Tower. Such properties are not only a good investment, but also a mark of prestige. The average price of residential real estate here is 45 million rubles for an apartment with a total floor area of 334 sqft (102 m²). The average price of a square meter (3.28 square feet) is in the range of 650 to 700 thousand rubles. There are two- and three-room apartments available in the Federation Tower, each with its own loggia. As for rent, the minimum price of one month’s stay in a three-room apartment in this skyscraper is 300 000 rubles per month.

The Mercury City Tower skyscraper welcomes citizens from all parts of Russia. This building is no less tall than the world-famous Dubai skyscrapers. Living in its apartments is a delight. The minimum cost of an apartment in the Mercury City Tower is 75 million rubles. The average price of a square meter (3.28 square feet) is 800 thousand rubles. And for those looking for a lower price point, some of the properties are also available for rent – in this case you will pay a minimum of 250 thousand rubles per month.

The Imperia Tower is a key cluster of interesting offers. The best options for buying and renting apartments within the MIBC can all be found in this skyscraper. The lowest price of a residential apartment here is 40 million rubles. A square meter (3.28 square feet) in a luxurious apartment in the Imperia Tower currently costs 600 thousand rubles, while the price range of the listings available for rent in this skyscraper is from 350 thousand all the way up to 1 million rubles per month.

This complex, standing on a faceted or “crystal” base, is an architectural engineering project boasting spectacular design. Behind its impressive façades is an abundance of penthouses and apartments having floor areas in the range of 262 sqft (80 m²) to 984 sqft (300 m²). The minimum price of an apartment in the OKO Tower Complex is 40 million rubles (the price of a square meter (3.28 square feet) is 500 thousand rubles). You can rent an apartment here starting from 400 thousand rubles per month.

City of Capitals

The City of Capitals is an exemplary architectural complex. Its sum appearance gives the impression of a huge city. Inside its walls are spacious apartments available for purchase and rent. This complex is considered to be especially prestigious. The prices of apartments here start from 50 million rubles, while the minimum cost of renting is 400 thousand rubles per month.

Please note! The price of real estate available for purchase or rent depends on: the tower, the floor, the total floor area, the furnishings and/or interior design, and other factors.

The key advantages of buying/purchasing real estate in Moscow-City are:

• Favorable location;
• Convenient transportation links;
• Well-developed infrastructure;
• High safety level;
• Efficient architecture;
• Panoramic windows.

Buying real estate in Moscow-City is very much a rational decision, most appealing to those who value the ultimate level of comfort. The residential apartments here boast impressive interior design solutions executed in the contemporary style.

Related posts

Property tax in russia, the best international schools in moscow.

Our Rating of the Best Districts of Moscow for Living In

Join the discussion cancel reply.

Save my name, email, and website in this browser for the next time I comment.

Compare listings

Reset Password

Please enter your username or email address. You will receive a link to create a new password via email.

Send a Request