17 foot wooden sailboat

• BOAT OF THE YEAR
• Newsletters
• Sailboat Reviews
• Boating Safety
• Sailing Totem
• Charter Resources
• Destinations
• Galley Recipes
• Living Aboard
• Sails and Rigging
• Maintenance
• Best Marine Electronics & Technology

20 Best Small Sailboats for the Weekender

• By Mark Pillsbury
• Updated: August 4, 2021

In order to go cruising, most of us require a sailboat with a head, a galley, and bunks. The boat, likely a 30-footer and more often a 40-footer, will have electronics for navigation and entertainment, refrigeration if the trip is longer than a coastal hop, an engine for light wind, and, depending on our appetites for food and fun, perhaps a genset to power our toys and appliances.

To go sailing , however, all we really need is a hull, mast, rudder, and sail. To experience the pure joy of sheeting in and scooting off across a lake, bay, or even the open ocean, there’s nothing better than a small sailboat – we’re talking sailboats under 25 feet. You can literally reach out and touch the water as it flows past. You instantly feel every puff of breeze and sense every change in trim.

Some of the boats in this list are new designs, others are time-tested models from small sailboat manufacturers, but every one is easy to rig, simple to sail, and looks like a whole lot of fun either for a solo outing on a breezy afternoon or to keep family and friends entertained throughout your entire sailing season. This list is made up of all types of sailboats , and if you’re looking for a list of some of the best small sailboats for beginners, you’ll find exactly that here.

Any one of these popular boats could be labeled as a trailerable sailboat, daysailer, or even a weekender sailboat. And while most would be labeled as a one or two person sailboat, some could comfortably fit three or even four people.

Marblehead 22 Daysailer

If you have an eye for elegant lines and your heart goes pitter-patter over just the right amount of overhang beneath a counter transom, the Marblehead 22 daysailer, designed by Doug Zurn and built by Samoset Boatworks in Boothbay, Maine, will definitely raise your pulse. Traditional-looking above the waterline and modern beneath, the cold-molded hull sports a deep bulb keel and a Hall Spars carbon-fiber mast with a wishbone rig and square-top main. The 11-foot-9-inch cockpit can seat a crowd, and a small cuddy forward will let you stow your friends’ gear for the day. samosetboatworks.com

Catalina 22 Sport

Many a harbor plays host to an active fleet of Catalina 22s, one of the most popular small sailboats over the years, given its basic amenities and retractable keel, which allows it to be easily trailered. Recently, the company introduced the Catalina 22 Sport, an updated design that can compete with the older 22s. The boat features a retractable lead keel; a cabin that can sleep four, with a forward hatch for ventilation; and a fractional rig with a mainsail and a roller-furling jib. Lifelines, a swim ladder, and an engine are options, as are cloth cushions; vinyl cushions are standard. The large cockpit will seat a crowd or let a mom-and-pop crew stretch out and enjoy their sail. It’s clear why the Catalina 22 is one of the best sailboats under 25 feet. catalinayachts.com

With its large, open-transom cockpit and sloop rig, the Hunter 22 makes a comfortable daysailer for family and friends. But with its cuddy cabin, twin bunks, optional electrical system, opening screened ports, and portable toilet, a parent and child or a couple could comfortably slip away for an overnight or weekend. Add in the optional performance package, which includes an asymmetric spinnaker, a pole, and a mainsheet traveler, and you could be off to the races. The boat features a laminated fiberglass hull and deck, molded-in nonskid, and a hydraulic lifting centerboard. Mount a small outboard on the stern bracket, and you’re set to go. marlow-hunter.com

Not sure whether you want to race, cruise or just go out for an afternoon sail? Since 1958, sailors have been having a ball aboard the Uffa Fox/George O’Day-designed Daysailer. Fox, who in the 1950s was on the cutting edge of planning-dinghy design, collaborated with Fall River, Massachusetts boatbuilder O’Day Corp. to build the 16-foot Daysailer, a boat that features a slippery hull and a small cuddy cabin that covers the boat roughly from the mast forward. Thousands of Daysailers were built by various builders, and they can be found used for quite affordable prices. There are active racing fleets around the US, and new Daysailers are still in production today, built by Cape Cod Ship Building. capecodshipbuilding.com

BayRaider from Swallow Boats

Easy to rig and trailer, the BayRaider from England’s Swallow Yachts is a relative newcomer to the small-boat market in the United States. Nearly all of its 19 feet 9 inches is open cockpit, though a spray hood can be added to keep the forward sections dry. The BayRaider is ketch-rigged with a gunter-style mainmast. The topmast and mizzen are both carbon-fiber, which is an option for the mainmast as well. The BayRaider can be sailed with a dry hull in lighter conditions or with 300 pounds of water ballast to increase its stability. With the centerboard and hinged rudder raised, the boat can maneuver in even the thinnest water.

$28,900, (904) 234-8779, swallowyachts.com

Big fun can come in small packages, especially if your vessel of choice happens to be the 12 ½-foot Beetle Cat. Designed by John Beetle and first built in 1921, the wooden shallow draft sailboat is still in production today in Wareham, Massachusetts at the Beetle Boat Shop. With a draft of just 2 feet, the boat is well-suited for shallow bays, but equally at home in open coastal waters. The single gaff-rigged sail provides plenty of power in light air and can be quickly reefed down to handle a blow. In a word, sailing a Beetle Cat is fun. beetlecat.com

West Wight Potter P 19

With berths for four and a workable galley featuring a cooler, a sink, and a stove, West Wight Potter has packed a lot into its 19-foot-long P 19. First launched in 1971, this is a line of boats that’s attracted a true following among trailer-sailors. The P 19′s fully retractable keel means that you can pull up just about anywhere and go exploring. Closed-cell foam fore and aft makes the boat unsinkable, and thanks to its hard chine, the boat is reportedly quite stable under way. westwightpotter.com

NorseBoat 17.5

Designed for rowing and sailing (a motor mount is optional), the Canadian-built NorseBoat 17.5—one of which was spotted by a CW editor making its way through the Northwest Passage with a two-man crew—features an open cockpit, a carbon-fiber mast, and a curved-gaff rig, with an optional furling headsail set on a sprit. The lapstrake hull is fiberglass; the interior is ply and epoxy. The boat comes standard with two rowing stations and one set of 9-foot oars. The boat is designed with positive flotation and offers good load-carrying capacity, which you could put to use if you added the available canvas work and camping tent. NorseBoats offers a smaller sibling, the 12.5, as well; both are available in kit form.

$19,000, (902) 659-2790, norseboat.com

Montgomery 17

Billed as a trailerable pocket cruiser, the Montgomery 17 is a stout-looking sloop designed by Lyle Hess and built out of fiberglass in Ontario, California, by Montgomery Boats. With a keel and centerboard, the boat draws just under 2 feet with the board up and can be easily beached when you’re gunkholing. In the cuddy cabin you’ll find sitting headroom, a pair of bunks, a portable toilet, optional shore and DC power, and an impressive amount of storage space. The deck-stepped mast can be easily raised using a four-part tackle. The builder reports taking his own boat on trips across the Golfo de California and on visits to California’s coastal islands. Montgomery makes 15-foot and 23-foot models, as well. If you’re in search of a small sailboat with a cabin, the Montgomery 17 has to be on your wish list.

With long overhangs and shiny brightwork, the CW Hood 32 is on the larger end of the daysailer spectrum. Designers Chris Hood and Ben Stoddard made a conscious decision to forego a cabin and head in favor of an open cockpit big enough to bring 4 or 5 friends or family out for an afternoon on the water. The CW Hood 32 is sleek and graceful through the water and quick enough to do some racing, but keeps things simple with a self-tacking jib and controls that can be lead back to a single-handed skipper. A top-furling asymmetrical, electric sail drive and Torqeedo outboard are all optional. The CW Hood 32 makes for a great small family sailboat.  cwhoodyachts.com

Sun Cat from Com-Pac

Shallow U.S. East Coast bays and rock-strewn coasts have long been graced by cat boats, whose large, gaff-rigged mainsails proved simple and powerful both on the wind and, better yet, when reaching and running. The 17-foot-4-inch Sun Cat, built by Com-Pac Yachts, updates the classic wooden cat with its fiberglass hull and deck and the easy-to-step Mastender Rigging System, which incorporates a hinged tabernacle to make stepping the mast a one-person job. If you want a personal sailboat ideal for solo sailing, the Sun Can is a great choice. Belowdecks, the twin 6-foot-5-inch berths and many other features and amenities make this cat a willing weekender.

$19,800, (727) 443-4408, com-pacyachts.com

Catalina 16.5

The Catalina 16.5 sits right in the middle of Catalina Yachts’ line of small sailboats, which range from the 12.5 to the 22 Capri and Sport, and it comes in both an easy-to-trailer centerboard model and a shoal-draft fixed-keel configuration. With the fiberglass board up, the 17-foot-2-inch boat draws just 5 inches of water; with the board down, the 4-foot-5-inch draft suggests good windward performance. Hull and deck are hand-laminated fiberglass. The roomy cockpit is self-bailing, and the bow harbors a good-sized storage area with a waterproof hatch. catalinayachts.com

No roundup of best small sailboats (trailerable and fun too) would be complete without a mention of the venerable Hobie 16, which made its debut in Southern California way back in 1969. The company has introduced many other multihulls since, but more than 100,000 of the 16s have been launched, a remarkable figure. The Hobie’s asymmetric fiberglass-and-foam hulls eliminate the need for daggerboards, and with its kick-up rudders, the 16 can be sailed right up to the beach. Its large trampoline offers lots of space to move about or a good place to plant one’s feet when hanging off the double trapezes with a hull flying. The boat comes with a main and a jib; a spinnaker, douse kit, trailer, and beach dolly are optional features. hobiecat.com

Novice sailors or old salts looking for simplicity could both enjoy sailing the Hunter 15. With a fiberglass hull and deck and foam flotation, the boat is sturdily built. The ample freeboard and wide beam provide stability under way, and the heavy-duty rubrail and kick-up rudder mean that you won’t have to worry when the dock looms or the going grows shallow. Both the 15 and its slightly larger 18-foot sibling come standard with roller-furling jibs.

$6,900/$9,500 (boat-show prices for the 15 and 18 includes trailers), (386) 462-3077, marlow-hunter.com

Super Snark

Under various owners, the Snark brand of sailboats, now built by Meyers Boat Co., has been around since the early 1970s. The Super Snark, at 11 feet, is a simple, easily car-topped daysailer that’s fit out with a lateen rig and sail. Billed as unsinkable, the five boats in the company’s line are built with E.P.S. foam, with the external hull and deck vacuum-formed to the core using an A.B.S. polymer. The Super Snark weighs in at 50 pounds, and with a payload capacity of 310 pounds, the boat can carry two.

$970, (800) 247-6275, meyersboat.com

Norseboat 21.5

Built in Canada, the NorseBoat 21.5 is a rugged looking craft that comes in a couple of configurations: one with an open cockpit and small doghouse, and another with a smaller cockpit and cabin that houses a double berth for two adults and optional quarter berths for the kids. Both carry NorseBoat’s distinctive looking carbon fiber gaff-rigged mast with main and jib (a sprit-set drifter is optional), and come with a ballasted stub keel and centerboard. Because of its lightweight design, the boat can be rowed and is easily trailered.

$36,000 (starting), 902-659-2790, norseboat.com

Flying Scot

Talk about time-tested, the 19-foot Flying Scot has been in production since 1957 and remains a popular design today. Sloop rigged, with a conventional spinnaker for downwind work, the boat is an easily sailed family boat as well as a competitive racer, with over 130 racing fleets across the U.S. Its roomy cockpit can seat six to eight, though the boat is often sailed by a pair or solo. Hull and deck are a fiberglass and balsa core sandwich. With the centerboard up, the boat draws only eight inches. Though intended to be a daysailer, owners have rigged boom tents and berths for overnight trips, and one adventurous Scot sailor cruised his along inland waterways from Philadelphia to New Orleans.

Known primarily for its line of racing dinghys, RS Sailing also builds the 16-foot, 4-inch Venture, which it describes as a cruising and training dinghy. The Venture features a large, self-draining cockpit that will accommodate a family or pack of kids. A furling jib and mainsail with slab reefing come standard with the boat; a gennaker and trapeze kit are options, as is an outboard motor mount and transom swim ladder. The deck and hull are laid up in a fiberglass and Coremat sandwich. The Venture’s designed to be both a good performer under sail, but also stable, making it a good boat for those learning the sport.

$14,900, 203-259-7808, rssailing.com

Topper makes a range of mono- and multihull rotomolded boats, but the model that caught one editor’s eye at Strictly Sail Chicago was the Topaz Taz. At 9 feet, 8 inches LOA and weighing in at 88 pounds, the Taz is not going to take the whole crowd out for the day. But, with the optional mainsail and jib package (main alone is for a single child), the Taz can carry two or three kids or an adult and one child, and would make a fun escape pod when tied behind the big boat and towed to some scenic harbor. The hull features Topper’s Trilam construction, a plastic and foam sandwich that creates a boat that’s stiff, light, and durable, and shouldn’t mind being dragged up on the beach when it’s time for a break.

$2,900 (includes main and jib), 410-286-1960, topazsailboats.com

WindRider WRTango

WRTango, a fast, sturdy, 10-foot trimaran that’s easy to sail, is the newest portable craft from WindRider International. It joins a line that includes the WR16 and WR17 trimarans. The Tango features forward-facing seating, foot-pedal steering, and a low center of gravity that mimics the sensation of sitting in a kayak. It weighs 125 pounds (including the outriggers and carbon-fiber mast), is extremely stable, and has single-sheet sail control. The six-inch draft and kick-up rudder make it great for beaching, while the hull and outriggers are made of rotomolded polyethylene, so it can withstand running into docks and being dragged over rocks.

$3,000, 612-338-2170, windrider.com

• More: 21 - 30 ft , Boat Gallery , day sailing , dinghy , Sailboat Reviews , Sailboats , under 20 ft
• More Sailboats

New to the Fleet: Pegasus Yachts 50

Balance 442 “lasai” set to debut, sailboat review: tartan 455, meet the bali 5.8, route planning in the face of climate change, how to rig everything in your favor, imtra named employee-owned company of the year.

• Digital Edition
• Customer Service
• Privacy Policy
• Email Newsletters
• Cruising World
• Sailing World
• Salt Water Sportsman
• Sport Fishing
• Wakeboarding

10 Best Small Sailboats (Under 20 Feet)

Last Updated by

Daniel Wade

December 28, 2023

Compact, easy to trailer, simple to rig, easy to maintain and manage, and affordable, the best small boats all have one thing in common: they offer loads of fun while out there on the water.

So whether you're on a budget or just looking for something that can offer ultimate daytime rides without compromising on safety, aesthetic sensibilities, alternate propulsion, and speed, the best small sailboats under 20 feet should be the only way to go.

Let's be brutally honest here; not everyone needs a 30-foot sailboat to go sailing. They come with lots of features such as electronics, entertainment, refrigeration, bunks, a galley, and even a head. But do you really need all these features to go sailing? We don't think so.

All you need to go sailing is a hull, a mast, rudder, and, of course, a sail. And whether you refer to them as daysailers, trailerable sailboats , a weekender sailboat, or pocket cruisers, there's no better way to enjoy the thrills of coastal sailing than on small sailboats.

There are a wide range of small boats measuring less than 20 feet available in the market. These are hot products in the market given that they offer immense thrills out on the sea without the commitment required to cruise on a 30-footer. A small sailboat will not only give you the feel of every breeze but will also give you the chance to instantly sense every change in trim.

In this article, we'll highlight 10 best small sailboats under 20 feet . Most models in this list are time-tested, easy to rig, simple to sail, extremely fun, and perfect either for solo sailing or for sailing with friends and family. So if you've been looking for a list of some of the best small sailboats , you've come to the right place.

So without further ado, let's roll on.

Table of contents

{{boat-info="/boats/hunter-15"}}

The Marlow-Hunter 15 is not only easy to own since it's one of the most affordable small sailboats but also lots of fun to sail. This is a safe and versatile sailboat for everyone. Whether you're sailing with your family or as a greenhorn, you'll love the Hunter 15 thanks to its raised boom, high freeboard, and sturdy FRP construction.

With high sides, a comfortable wide beam, a contoured self-bailing cockpit, and fiberglass construction, the Hunter 15 is certainly designed with the novice sailor in mind. This is why you can do a lot with this boat without falling out, breaking it, or capsizing. Its contoured self-baiting cockpit will enable you to find a fast exit while its wide beam will keep it steady and stable no matter what jibes or weight shifts happen along the way.

This is a small sailboat that can hold up to four people. It's designed to give you a confident feeling and peace of mind even when sailing with kids. It's easy to trailer, easy to rig, and easy to launch. With a price tag of about $10k, the Hunter 15 is a fun, affordable, and versatile boat that is perfect for both seasoned sailors and novices. It's a low-maintenance sailboat that can be great for teaching kids a thing or two about sailing.

Catalina 16.5

{{boat-info="/boats/catalina-16-5"}}

Catalina Yachts are synonymous with bigger boats but they have some great and smaller boats too such as Catalina 16.5. This is one of the best small sailboats that are ideal for family outings given that it has a big and roomy cockpit, as well as a large storage locker. Designed with a hand-laminated fiberglass sloop, the Catalina 16.5 is versatile and is available in two designs: the centerboard model and the keel model.

The centerboard model is designed with a powerful sailplane that remains balanced as a result of the fiberglass centerboard, the stable hull form, and the rudder. It also comes with a tiller extension, adjustable hiking straps, and adjustable overhaul. It's important to note that these are standard equipment in the two models.

As far as the keel model is concerned, this is designed with a high aspect keel as the cast lead and is attached with stainless steel keel bolts, which makes this model perfect for mooring or docking whenever it's not in use. In essence, the centerboard model is perfect if you'll store it in a trailer while the keel model can remain at the dock.

All in all, the Catalina 16.5 is one of the best small sailboats that you can get your hands on for as low as $10,000. This is certainly a great example of exactly what a daysailer should be.

{{boat-info="/boats/hobie-16"}}

There's no list of small, trailerable, and fun sailboats that can be complete without the inclusion of the classic Hobie 16. This is a durable design that has been around and diligently graced various waters across the globe since its debut way back in 1969 in Southern California. In addition to being durable, the Hobie 16 is trailerable, great for speed, weighs only 320 pounds, great for four people, and more importantly, offers absolute fun.

With a remarkable figure of over 100,000 launched since its debut, it's easy to see that the Hobie 16 is highly popular. Part of this popularity comes from its asymmetric fiberglass-and-foam sandwiched hulls that include kick-up rudders. This is a great feature that allows it to sail up to the beach.

For about $12,000, the Hobie 16 will provide you with endless fun throughout the summer. It's equipped with a spinnaker, trailer, and douse kit. This is a high-speed sailboat that has a large trampoline to offer lots of space not just for your feet but also to hand off the double trapezes.

Montgomery 17

{{boat-info="/boats/montgomery-17"}}

Popularly known as the M-17, The Montgomery 17 was designed by Lyle C. Hess in conjunction with Jerry Montgomery in Ontario, California for Montgomery Boats. Designed either with keel or centerboard models, the M-17 is more stable than most boats of her size. This boat is small enough to be trailered but also capable of doing moderate offshore passages.

This small sailboat is designed with a masthead and toe rail that can fit most foresails. It also has enough space for two thanks to its cuddly cabin, which offers a sitting headroom, a portable toilet, a pair of bunks, a DC power, and optional shore, and a proper amount of storage. That's not all; you can easily raise the deck-stepped mast using a four-part tackle.

In terms of performance, the M-17 is one of the giant-killers out there. This is a small sailboat that will excel in the extremes and make its way past larger boats such as the Catalina 22. It glides along beautifully and is a dog in light air, though it won't sail against a 25-knot wind, which can be frustrating. Other than that, the Montgomery 17 is a great small sailboat that can be yours for about $14,000.

Norseboat 17.5

{{boat-info="/boats/norseboat-17-5"}}

As a versatile daysailer, Norseboat 17.5 follows a simple concept of seaworthiness and high-performance. This small sailboat perfectly combines both contemporary construction and traditional aesthetics. Imagine a sailboat that calls itself the "Swiss Army Knife of Boats!" Well, this is a boat that can sail and row equally well.

Whether you're stepping down from a larger cruiser or stepping up from a sea kayak, the unique Norseboat 17.5 is balanced, attractive, and salty. It has curvaceous wishbone gaff, it is saucy, and has a stubby bow-sprit that makes it attractive to the eyes. In addition to her beauty, the Norseboat 17.5 offers an energy-pinching challenge, is self-sufficient, and offers more than what you're used to.

This is a small, lightweight, low-maintenance sailboat that offers a ticket to both sailing and rowing adventures all at the same time. At about 400 pounds, it's very portable and highly convenient. Its mainsails may look small but you'll be surprised at how the boat is responsive to it. With a $12,500 price tag, this is a good small sailboat that offers you the versatility to either row or sail.

{{boat-info="/boats/sage-marine-sage-17"}}

If you've been looking for a pocket cruiser that inspires confidence, especially in shoal water, look no further than the Sage 17. Designed by Jerry Montgomery in 2009, the Sage 17 is stable and should heel to 10 degrees while stiffening up. And because you want to feel secure while sailing, stability is an integral feature of the Sage 17.

This is a sailboat that will remain solid and stable no matter which part of the boat you stand on. Its cabin roof and the balsa-cored carbon-fiber deck are so strong that the mast doesn't require any form of compression post. The self-draining cockpit is long enough and capable of sleeping at 6 feet 6 inches.

The Sage 17 may be expensive at $25k but is a true sea warrior that's worth look at. This is a boat that will not only serve you right but will also turn heads at the marina.    

{{boat-info="/boats/laserperformance-laser-sb3"}}

Having been chosen as the overall boat of the year for 2008 by the Sailing World Magazine, the Laser SB3 is one of the coolest boats you'll ever encounter. When sailing upwind, this boat will lock into the groove while its absolute simplicity is legendary. In terms of downwind sailing, having this boat will be a dream come true while it remains incredibly stable even at extraordinary speed.

Since its debut in 2004, the Laser SB3 has surged in terms of popularity thanks to the fact that it's designed to put all the controls at your fingertips. In addition to a lightweight mast, its T- bulb keel can be hauled and launched painlessly. For about $18,000, the Laser SB3 ushers you into the world of sports sailing and what it feels to own and use a sports boat.

{{boat-info="/boats/fareast-18"}}

As a manufacturer, Fareast is a Chinese boat manufacturer that has been around for less than two decades. But even with that, the Fareast 18 remains a very capable cruiser-racer that will take your sailing to the next level. In addition to its good looks, this boat comes with a retractable keel with ballast bulb, a powerful rig, and an enclosed cabin.

Its narrow design with a closed stern may be rare in sailboats of this size, but that's not a problem for the Fareast 18. This design not only emphasizes speed but also makes it a lot easier to maintain this boat. Perfect for about 6 people, this boat punches above its weight. It's, however, designed to be rigged and launched by one person.

This is a relatively affordable boat. It's agile, safe, well-thought-out, well built, and very sporty.

{{boat-info="/boats/chuck-paine-paine-14"}}

If you're in the market looking for a small sailboat that offers contemporary performance with classic beauty, the Paine 14 should be your ideal option. Named after its famous designer, Chuck Paine, this boat is intentionally designed after the classic Herreshoff 12.5 both in terms of dimensions and features.

This is a lightweight design that brings forth modern fin keel and spade rudder, which makes it agile, stable, and faster. The Paine 14 is built using cold-molded wood or west epoxy. It has varnished gunnels and transoms to give it an old-time charm. To make it somehow modern, this boat is designed with a carbon mast and a modern way to attach sails so that it's ready to sail in minutes.

You can rest easy knowing that the Paine 14 will not only serve you well but will turn heads while out there.

{{boat-info="/boats/wd-schock-lido-14"}}

Many sailors will attest that their first sailing outing was in a Lido 14. This is a classic sailboat that has been around for over four decades and still proves to be a perfect match to modern small boats, especially for those still learning the ropes of sailing.

With seating for six people, the Lido 14 can be perfect for solo sailing , single-handed sailing, or if you're planning for shorthanded sailing. While new Lido 14 boats are no longer available, go for a functional used Lido 14 and you'll never regret this decision. It will serve you well and your kids will probably fall in love with sailing if Lido 14 becomes their main vessel during weekends or long summer holidays.

Bottom Line

There you have it; these are some of the best small sailboats you can go for. While there are endless small sailboats in the market, the above-described sailboat will serve you right and make you enjoy the wind.

Choose the perfect sailboat, invest in it, and go out there and have some good fun!

Related Articles

I've personally had thousands of questions about sailing and sailboats over the years. As I learn and experience sailing, and the community, I share the answers that work and make sense to me, here on Life of Sailing.

by this author

Best Sailboats

Most Recent

What Does "Sailing By The Lee" Mean?

October 3, 2023

The Best Sailing Schools And Programs: Reviews & Ratings

September 26, 2023

Important Legal Info

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies.

Similar Posts

Affordable Sailboats You Can Build at Home

September 13, 2023

Best Small Sailboats With Standing Headroom

Best Bluewater Sailboats Under $50K

Popular posts.

Best Liveaboard Catamaran Sailboats

Can a Novice Sail Around the World?

Elizabeth O'Malley

June 15, 2022

4 Best Electric Outboard Motors

How Long Did It Take The Vikings To Sail To England?

10 Best Sailboat Brands (And Why)

December 20, 2023

7 Best Places To Liveaboard A Sailboat

Get the best sailing content.

Top Rated Posts

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies. (866) 342-SAIL

© 2024 Life of Sailing Email: [email protected] Address: 11816 Inwood Rd #3024 Dallas, TX 75244 Disclaimer Privacy Policy

• Whitehall Spirit® Solo 14® Slide Seat Sculling Rowboat
• Whitehall Spirit® Tango 17® Double Slide Seat Sculling Rowboat
• Watch Life-changing Rowboats Video

Classic Whitehall Spirit® 17 Double Slide Seat Sculling Rowboat

Classic whitehall spirit® 17 sailing rowboat.

• Classic Whitehall Spirit® 17 Expedition Sailing and Sculling Rowboat

Classic Whitehall Spirit® 17 Traditional Fixed Seat Rowboat

• Classic Whitehall Spirit® 14 Slide Seat Sculling Rowboat
• Classic Whitehall Spirit® 14 Sailing Rowboat
• Classic Whitehall Spirit® 14 Traditional Fixed Seat Rowboat
• Tyee Spirit® 14 Single Slide Seat Sculling Rowboat
• Classic Whitehall Spirit® Tyee 14 Sailing Rowboat
• Classic Whitehall Spirit® Tyee 14 Traditional Fixed Seat Rowboat
• Classic Whitehall Spirit® Tyee 14 Fishing Rowboat
• Classic Whitehall Spirit® Westcoast 11.6 Slide Seat Sculling Rowboat
• Classic Whitehall Spirit® Westcoast 11.6 Sailing Rowboat
• Classic Whitehall Spirit® Westcoast 11.6 Fixed Seat Traditional Rowboat
• Westcoast 11.6 – Lifeguard Patrol Boat
• Classic Whitehall Spirit® Minto 9’ Dinghy, Tender, Pond Boat
• We Deliver Worlwide – See Details
• Classic Whitehall Spirit®
• Whitehall Spirit® Solo 14® & Tango 17®
• Whitehall Spirit® Solo 14® & Tango 17® Rowboats
• Naming Your Boat
• Torqeedo Electric Outboard
• Boat Slider Trax®
• Classic Whitehall Sailing Gear
• Replacement Parts for Whitehall Spirit® Owners
• NEW: A World Of Adventure Awaits
• Testimonials
• Rowing and Sailing Stories
• Product Profiles
• Tips & Skills
• Health and Fitness
• Newsletters
• Love Letters
• Connect and subscribe!
• Care, Storage & Maintenance of Your Whitehall Boat
• Frequently Asked Questions
• Ordering/Delivery Details & Policies
• LEARN TO ROW

(Optional Sculling Slide Seats are available)

The Classic Whitehall Spirit® 17 sailing rowboat delights everyone from beginner to the most ardent sailor with its ease of handling and its classy efficient sail rig. It sails comfortably with one, two, three, or even four adults aboard. It can sail in quite shallow water due to its kick-up pivoting bronze centreboard and rudder. The midship fixed seats are removable for ease of crew movement or more space while sailing.

This boat sails well in lighter wind and has jiffy reefing lines on the mainsail for shortening sail in higher winds. Reefs can be added while out sailing. If the wind drops it’s a pleasure to use the oars and enjoy a smooth row home. This boat rows at 3 to 5 knots (5k to 8k) and faster for brief periods. It sails much faster than when rowing. With the bronze centerboard and rudder retracted the boat will float in 6” (15cm) of water. It’s perfect for landing on beaches and exploring ashore.

The large sail area and low center of effort reduces heeling (tendency to lean) under sail. The rig sets up or lowers in minutes. The free-standing mast requires no stays or wires and slips into the mast socket or lifts out to stow within the boat.

With the mast, boom, sailing gear and fixed seats all removed one or two optional slide seat sculling units can be installed to slide seat row by yourself or with a friend. This boat is stable and safe even while rowing in wind and waves. With just the traditional fixed seats installed the boat can be rowed by one, two, or three people.

Three people rowing at once is a fun family activity and this boat will cruise smoothly along at 5 to 6 knots (10-12K), amazing any bystanders.

We supply the best traditional oars available with a choice of Spruce/Carbon Traditional Oars with sewn leather collars and pressure cast oarlock ,and, all Carbon Fiber Traditional Oars with plastic collars and offset oarlocks.

It is available with an optional Solid Teak Floorboard or a fully buoyant Ocean Tender Floor that adds substantial reserve buoyancy and with the drain plug pulled the empty boat will self-bail.

Other factory options include a stainless-steel keel strip or a classy custom name . Check out the sailing gear options on the sailing gear accessories page.

This Classic Whitehall Spirit® 17 Sailing model is at home on the deck of a yacht, at the cottage, on a trailer in the garage or parked on a dock. If stored outside on a dock bunk on a trailer, or boat dolly, exposed to weather, Lexan battens and a fitted Sunbrella cover are recommended to keep the boat pristine. If tying up to a dock consider adding a set of tie-up lines and fenders to your order.

This boat is also available as an Expedition 17 model , which is a package that includes most of the available options including the slide seat sculling gear.

Maintenance involves cleaning the teak and applying a coat of exterior teak oil and takes about three hours per year. See the article on Care, Storage & Maintenance of your Classic Whitehall Spirit®.

Like all Classic Whitehall Spirit® boats it is impeccably constructed by our master craftsmen in Victoria, BC. It is built to last for 100 years providing sailing and rowing pleasure for generations. Our commitment to producing the highest quality and superior design makes this the ultimate boat of its type in the marketplace. It is CE certified, and US Coast Guard approved. Built-in buoyancy makes it virtually unsinkable.

Phone  1-844-880-5151  or email  [email protected] for a quote for a Classic Whitehall Spirit® and accessories custom delivered by our truck and driver to your driveway, cottage, or marina, in southern Canada, mainland USA, or shipped anywhere in the world. We offer certified custom crating for offshore orders. We have shipped worldwide for over 30 years. Thousands of Whitehall Spirit® boat owners are in over 52 countries.

Classic Whitehall Spirit® 17 Sail Model with Ocean Tender Floor and also set up for Slide Seat Sculling Gear.

John Sund & Terry Gardiner say:

“The 17 foot Whitehall is a great boat for a long-distance rowing venture through the Inside Passage. With very little work adding a few devices to assist in a long-distance rowing venture, the Whitehall was ready to travel. It rows easily with two slide seats, carries the gear needed for a remote camping adventure, and has great stability to handle wind and waves. The drop keel helps maintain track and reduce roll. The Whitehall 17 is a fun boat for day trips or just going for a row!”

Plus another great comment from John & Terry:

“Great rowing adventure. We rowed for 20 days and 400 miles through the Inside Passage from Seattle, Washington, USA to Port Hardy, BC, Canada camping on the beaches. We anchored the boat or, using inflatable rollers, moved the boat up and down the beach when there was not a safe harbor. We traveled through incredible scenery and wildlife viewing.”

Price Before Options:

$ 39,995 usd.

Complete boat with solid teak woodwork, bronze fittings, lapstrake fiberglass hull, bilge drain/plug, bronze builder’s plaque, three fixed seat rowing stations, pivoting bronze centerboard, kick-up rudder, Spruce mast, boom and lug, mainsail, jib, and sailing gear – ready to row or sail.

Pricing PDF: Classic Whitehall Spirit® 17 Sailing Rowboat

Classic Whitehall Models Accessories USD Pricing PDF: Download Here

More info and to place your order:

Phone 1-844-880-5151 or email [email protected] to receive a comprehensive quote that covers fully insured custom curb side delivery via our company truck and driver. This service is available for most locations in the USA or Canada. We also offer worldwide shipping and have shipped Whitehall Spirit® boats to over 50 countries.

Craftsmanship

Specifications, factory options.

*For mobile: swipe table left to right.

Attention To Detail

Contact us to learn about our current seasonal promotion

For details please call 1-844-880-5151 or email [email protected], or fill out this form and we’ll contact you., name* email* phone* state* model of interest click here to select please call to go over models that fit my needs solo 14® slide seat sculling whitehall rowboat tango 17® double slide seat sculling whitehall rowboat classic whitehall spirit® 17 double slide seat sculling rowboat classic whitehall spirit® 17 sailing rowboat with optional sculling slide seats classic whitehall spirit® 17 expedition sailing & sculling rowboat classic whitehall spirit® 17 traditional rowboat classic whitehall spirit® 14 slide seat sculling rowboat classic whitehall spirit® 14 sailing rowboat with optional slide seat classic whitehall spirit® 14 traditional rowboat tyee spirit® 14 single slide seat sculling rowboat tyee spirit® 14 sailing rowboat with optional slide seat tyee spirit®14 traditional rowboat with fixed seats tyee spirit®14 fishing rowboat westcoast 11.6 single slide seat sculling rowboat westcoast 11.6 sailing rowboat with optional slide seat westcoast 11.6 traditional rowboat with fixed seats westcoast 11.6 – lifeguard patrol boat minto 9’ 3″ rowing tender newsletter subscription for special offers   ×, how to order.

Many customers first print the “Pricing and Accessories PDF”, in the “ Pricing ” tab above, for the boat they are planning to purchase, and then check-off the items they are interested in before calling or sending it to us. This is a good way to begin the process.

Alternatively, you can call to discuss your options, especially if you are unsure about what Whitehall boat model you are interested in. Your order may be as simple as a basic rowing model with oars, or as elaborate as a slide-seat rowing & sailing model with accessories, delivered to another continent.

Ordering/Delivery Details & Policies

Please read complete details by clicking here .

Take the next step and obtain a no-obligation quote:

Call toll free in (North America): 1-844-880-5151 Outside North America: +1-250-361-2628 Email: [email protected]

We are located in beautiful Victoria, British Columbia Canada on the Pacific side of North America. If you call outside of our normal business hours of 9am-5pm Monday to Friday and get our message machine, please let us know the best time and way to reach you.

You may also be interested in

Classic Whitehall Spirit® 17 Expedition Sailing & Sculling Rowboat

Find your classic whitehall spirit® boat.

All 18 classic boat models can be ordered in different configurations to suit your needs.

This design was inspired by the many enquiries I have had from builders who admire the lines of the Penobscot 14, but need a bigger boat. The Penobscot 17 features the same glued lapstrake construction, with marine plywood planking laid on fore and aft stringers, that has proven very suitable for the amateur builder. Although the two boats may fairly be described as sisters, with similar shapely, sea-kindly lines, the Penobscot 17 is not just a scaled-up Penobscot 14. She is a completely new design. As you would expect in a bigger boat, she has a little less beam and freeboard in proportion to her length; she has a longer, leaner look, without compromising stability.

For those who would like to do some more extended cruising, the Penobscot 17 provides an extra reserve of buoyancy and stability. Like the Penobscot 14, she has flotation compartments at bow and stern; in addition, the plans show four inch thick slabs of styrofoam flotation under the side seats which run the full length of the boat. The styrofoam is tucked away out of sight, but the plans show how to make it easy to remove for maintenance. THE PLANS The plans include full size patterns of the stem, transom, bulkheads, centerboard and trunk, rudder, and other parts. These are printed on two large sheet of Mylar, carefully laid out for clarity and ease of use. The construction drawings show the boat at different stages of construction, with full size details, three sail plans, and spar plans. The 84 page building manual is illustrated with drawings and photographs, and takes you step by step through the building process. It includes lists of materials, sources for marine plywood and hardware, and much additional information.

MATERIALS, COSTS, AND BUILDING TIME Although a bigger project than the 14, the Penobscot 17 is no more challenging to the builder with some woodworking experience. With the easier curves of a longer boat, bending stringers and planking gives little trouble. The Penobscot 17 is planked with 6 mm (1/4") marine plywood. The bulkheads are 3/4" marine plywood; the seats and other parts use 3/8" and 1/2" plywood. I recommend okoume or meranti plywood. Suitable lumber is available in most areas from a good lumber yard. Other materials include epoxy resin (an epoxy kit is available), and stainless steel screws. Call if you have questions about wood or other materials, or problems locating supplies. The cost to build a Penobscot 17 should be about $1,200 - $1,500 without a sailing rig. Sails, spars and rigging will add $1,000 to $1,200, depending on the rig. How long will it take to build your Penobscot 17? This is the biggest variable, depending on how many hours you put in each week, how quick you are, how fussy you are about paint and varnish. Be prepared to spend as much as a year on your project - as always, remember that the satisfaction you get from your boat will be in proportion to the effort you put into it.

WHAT YOU CAN ORDER: (Click on Boat Design and Prices Page and Order Form || Shipping costs are given on the Order Form )

STUDY PACKAGE: This includes covers all three Penobscot designs, 13, 14 and 17. There are 24" x 36" blueline drawings for each design, showing the lines of the boat, construction sections, interior layout, and sail plans, and a booklet containing detailed descriptions of the boats, their development and construction, and numerous photographs and drawings. $15.00 + P&H. Shipping costs are given on the Order Form

EPOXY KIT: The epoxy kit comes from System Three Resins, and provides you with all the resin, hardener, additives, measuring pumps, fiberglass cloth, brushes, gloves, and other items, that you will need. The System Three Epoxy Book, which gives detailed information on mixing and using epoxy, is included. (Epoxy solvent is not included, due to shipping restrictions. Hardware stores carry acetone or denatured alcohol, for use in cleaning up uncured epoxy.) Please call for shipping and handling.

BULKHEAD KIT: Includes a set of the six bulkheads that give the boat her shape, with the transom, and two-part stem, beveled and ready to set up on the building jig. is $1,158.00 meranti/$1,200.00 okoume, including plans and Penobscot 14 DVD. Please call for shipping and handling.

PLYWOOD PACKAGE: Plywood packages include all the plywood listed in the building manual. They come from World Panel Products, Inc., Riviera Beach, Florida. Three types of plywood are available; meranti, okoume, and sapele. All are high quality, marine grade plywood. Please call for details.

ALSO AVAILABLE: Sails, rigging kits, masts, spars, and other items. Call for details.

To view detailed boat plans description and spec pages, select a link below   Penobscot 13 | Penobscot 14 | Penobscot 17 | 12 Foot Main Peapod | Sand Dollar | Laughing Gull | Ace 14 Grace's Tender |  Jiffy V-22 | Jiffy 22 | Jiffy 9-7 | Bay Pilot 18 | Jack Tar | Grace Eileen 30 | Oar Plans

Boat Profile

The Wittholz Catboat

A classic adapted for plywood

From Issue   February 2021

T he catboat is a beamy, monohulled sailboat descended from a line of working watercraft. No one is sure of the origin of the name “catboat.” Some said the boat was as fleet as a cat. Or, the name might have been inspired by dock cats that greeted returning fishermen. Catboats fished, hauled freight, and ferried passengers along the U.S. Eastern Seaboard as early as 1850. Their spiritual home is Cape Cod, Massachusetts, where generations of the Crosby family built catboats, determining their shapes with hand-carved models.

The beam of a catboat is typically half its length. Such generous beam afforded room for a fisherman to work. A single mast, stepped far forward, has a forestay but generally no shrouds. The rig is a single sail, often a gaffer. Fishermen made headroom by furling the rig then hiking it high overhead with one of the halyards. Because catboats worked in shallow waters, most have shoal draft and a centerboard. Catboats have a characteristic barn-door rudder, hung proud of the stern and steered with a tiller.

Working watermen eventually adopted steam and gasoline. But a new kind of sailor, the pleasure boater, adopted the catboat, which retains a loyal following to this day.

Naval architect Charles W. Wittholz of Silver Spring, Maryland, designed boats ranging from 11’ dinghies to 85′ replica ships. In his career, Wittholz designed several catboats, but it was the 17-footer that he himself sailed on the Potomac River. Built in 1967, he named his boat GOOD OMEN and sailed her for more than 20 years.

The keel version of the Wittholz 17 catboat has its greatest draft 13-1/2′ back from the stem, so it can be brought fairly close to shore. The bundled boom and gaff have been hiked up by the peak halyard to provide more headroom in the cockpit.

T he plans for the 17′ 1″ plywood catboat include 11 sheets with good construction detail: materials, dimensions, fastening schedules, notes, and comments. Several alternatives are included: self-bailer instead of deep cockpit, lead-ballasted full keel instead of a centerboard, open cockpit instead of a cabin, gaff or marconi sailing rig, optional anchor-handling bowsprit, and an optional inboard engine. The plans date to the early 1960s, so some of the suppliers mentioned have long been out of business.

The Wittholz 17 requires lofting from the plan’s offsets. Drawing the body plan (the end-on view) requires a 6′ x 10′ drawing surface and is critical to loft accurately as it provides the full-sized patterns for the frames. The 6′ x 6′ side-view lofting of the stem provides patterns for the stem/forefoot assembly. The lofting for this catboat is not complicated; Greg Rössel’s book, Building Small Boats , covers lofting nicely.

Hull construction is straightforward: assemble the oak stem, the 1/2″ plywood transom, and the nine frames of mahogany or oak with 1/2″ plywood gussets. Set those elements on a level building jig, upside down, with the frames 22″ apart. Fit the mahogany or fir sheer stringers and chines, and the mahogany keelson to the frames.

The hull sides and bottom are 3/8″ plywood. The plans suggest a layer of fiberglass cloth on the ply for extra durability. I know from personal experience that if you get the catboat sideways to the wind and ram the dock, you can crack some plywood along the sides. The most vulnerable areas are between the frames forward of amidships, aft of the forward bulkhead. I suggest adding oak blocking between frames about 12″ above the waterline and heavy-duty fiberglass-epoxy on the inside of the plywood in these areas.

In my experience, fir and Aquatek plywoods check and crack if painted only, so they must be covered on both sides with fiberglass cloth set in epoxy. If you do cover plywood in fiberglass, do it after cutting pieces to shape, before installation, while they are still flat. This is so much easier than fiberglassing an assembled boat. High-quality okoume plywood is nice stuff: no voids, many plies. Okoume, when used for parts of the boat other than the hull, benefits from a barrier coat of unthickened epoxy on both sides, but it does not require fiberglass cloth.

This boat will always have a little water in the deepest part of the bilge. Seal this area with several coats of epoxy resin.

Get the sides from 5′ x 20′ panels (two sheets 5′ x 10′ scarfed). Attach the sides first. Get the bottoms from 4′ x 20′ panels (4′ x 8′ sheets scarfed). The bottom panels overlap the side panels most of the way then transition to a butt seam forward. Fit the keel to the keelson before turning the hull over.

T he sail plans include both marconi and gaff rigs. The gaff-rig mast I built is solid spruce: 5-1/4″ in diameter, 25′ long. The gaffer requires a single forestay but no shrouds. The hardware called out in the plans is all from Merriman Yacht Specialties, a company no longer in business. Most parts have readily available equivalents, but if gooseneck hardware is hard to find, try wooden jaws. See William Garden’s article, “The Right Jaws for your Gaff and Boom,” in WoodenBoat No.59 .

The gaff rig’s solid mast is too heavy and awkward to step handling it solely from the foredeck. Lacking a crane, it requires a person on a low bridge or atop a neighboring houseboat to steady the mast while a crew of two lifts/lowers on deck. Spare halyards from two neighboring sloops would also work to step this mast.

Those wanting a trailer-sailer will look to the marconi rig then make modifications for folding. The builder will have to design the modifications, because the plans say nothing about folding. The marconi mast is a 5-1/4″ x 4-1/4″ hollow rectangle, 32′ 3″ long. This mast requires a forestay and two shrouds that belay aft of the mast partner.

The gaff rig peaks up higher than is usual for a center of effort similar to the marconi. Build either sail with two sets of reefpoints as shown on the plans. The second reefpoint has a calming effect in 40-knot winds.

The optional bowsprit is not for a jib, as a jib of any kind would unbalance the boat. The bowsprit is for anchor handling, equipped with a chock to guide the chain and rode.

The Wittholz catboat has a centerboard, as catboats commonly do. Draft with centerboard up is 21″, down 4′ 3″. The centerboard case is 6′ long, most of it in the cabin, with 19″ extending aft into the cockpit. The centerboard itself is 3/8″ galvanized steel. There are 500 lbs of movable ballast in the form of lead pigs under the cabin and cockpit floorboards.

The trailer for this keelboat version of the catboat is fitted with screw pads to steady the hull while the weight of the boat is supported beneath the keel. The centerboard version could slide onto a trailer equipped with bunks.

The plans include an option for a full ballast keel, as seen in the catboat pictured here. The draft of the full-keel version is 28″. The builder must make a mold to pour 600 lbs of lead shaped to fair with the deadwood in the keel. The mold requires lofting, too; refer to the Bud McIntosh book, How to Build a Wooden Boat , for a simple explanation.

Either model weighs about 2,200 lbs, including the ballast. The trailer for it could be a bunkboard arrangement, but a trailer with boat stands is better. When trailering, the boat must rest on its keel, not its garboards.

With the tiller swung to port, there’s room for the stove when the cockpit is pressed into service as the galley. The plans call for an engine box, which would occupy the center of the cockpit. A transom-mounted outboard motor frees up that space for the crew.

T he cockpit is seriously spacious. Sloop sailors often walk by and exclaim, “Look at all that room!” The cockpit can easily accommodate six people. The seats have a comfortable slope, and the coamings are tilted as backrests should be. The footwell is deep but not self-bailing. Water will sump to the deepest part of the bilge where a reliable pump awaits. For a self-bailing cockpit, see the plans; there is a sheet for that. The high sheer up forward keeps the cockpit dry in most conditions.

At anchor, it is a fine thing to hike up the sailing rig for standing headroom in the cockpit. On the gaffer, do this by furling the sail, lashing boom to gaff, and hauling on the peak halyard. For the marconi rig, modify the wire topping lift. Its upper end is fixed to the top of the mast, so modify the bottom end with 1/4″ rope, blocks, and a cleat on the boom to adjust it.

The plans for the cabin include two berths and cabinets aft of them, one equipped with a sink, the other a two-burner stove. The keelboat version, seen here, leaves the space between the berths unobstructed by a centerboard trunk.

In the cabin, there is sitting headroom on berths port and starboard. The two lockers amidships are sure to be customized by the builder. At anchor, a Coleman stove works well in the cockpit aft, so the two-burner alcohol stove in the cabin shown in the plans may not be required. The drawings show a head up forward, but it flushes straight into the sea. Better find a place for a porta-potty, either forward or perhaps amidships port or starboard. When it comes to building the cabin, How to Build a Wooden Boat is again a good companion to the plans.

The plans show where to fit a small inboard engine, but a 5-hp, four-stroke, long-shaft outboard motor serves well as an auxiliary. The plans also show an option for stowing an outboard under a hatch set in the cockpit floor. On smooth water, the outboard will push the boat at 6 knots. Mount the outboard to a bracket on the transom, but keep it clear of the big rudder. Add framing in the transom for attaching the bracket to the boat. The bracket should be adjustable up and down to keep the propeller in the right amount of water, no matter where the passengers are. Most 5-hp outboards come with a propeller suitable for light craft or inflatable dinghies. For a boat of this size and weight, select a propeller with less pitch so that engine rpms are high enough to avoid lugging the engine.

The 220-sq-ft sail here is held to the mast by hoops and lashed to the gaff and boom. The plans not using sail track along the boom.

I n good conditions, expect this boat to sail to windward at 45 degrees off the wind. A sloop, with its two sails and narrower beam, might sail closer, but the catboat sailor specializes in his one mainsail and strives to get the most from it. The peak and throat halyards of the gaff rig provide control over sail shape. A three-part boom outhaul for either rig is useful to control the belly of the sail. The position of the crew greatly affects overall trim. Move crew aft or to windward to reduce weather helm, something catboats have in abundance. On this boat in particular, moving crew leeward can help push the hard chine underwater, so the side acts like a leeboard.

It is best not to oversheet a catboat. When hauled hard, the boom should be over the stern quarter of the boat. Hauled any harder, the boat slows down and crabs to leeward. Best to let out the sheet, find the wind, then adjust by looking for the sweet spot. On gusty days, do not cleat off the sheet; instead, wrap just enough turns around so it will slip when hit by a strong gust. On a reach, 15 knots of wind will move this boat at 6 knots. In stronger winds, reef the sail to match, preferably sooner than later.

At the helm, keep the tiller in one hand and the sheet in the other. One can sense immediately how the combination affects boat speed and trim.

Monte Copeland grew up in a lumberyard along the Ohio River, but never connected wood with water until after moving to Austin, Texas. Now retired from computer programming, Monte and his wife Sheila sail on Lake Travis. In his shop is an old Shellback dinghy getting ready for new paint.

Wittholz Catboat Particulars

Length/17′ 1″

Load waterline/16′ 6.6″

Beam/7′ 9.5″

Centerboarder draft, hull/21″

Centerboarder draft, board down/4′ 3″

Keelboat draft/28″

Displacement/3,080 lbs

Gaff sail area/220 sq ft

Thanks to reader Dick Lafferty for suggesting we review the Wittholz catboat—Ed.

Is there a boat you’d like to know more about? Have you built one that you think other Small Boats Magazine readers would enjoy? Please email us!

Share this article

Join The Conversation

We welcome your comments about this article. If you’d like to include a photo or a video with your comment, please email the file or link.

Comments (17)

Thank you very much for this article. I’ve built 2 wooden boats so far, one clinker and one stitch-and -glue plywood. I’ve looked many times at the lines of the Wittholz 17 and admired her beauty. You’ve brought her to life for me and provided a lot of food for thought.

Cheers, -Dick-

Mr Wittholz knew how to make a graceful boat! My first new boat, purchased in 1967, was a Chrysler Marine Lone Star 13. I had owned a $300 Philip Rhodes Penguin for just a month and sailed on White Rock Lake in Dallas. I quickly fell in love with the Lone Star 13s. What hooked me were two things: 1) their graceful, perfectly drawn sheer, and 2) the curling bow wave that the hollow in their forward section formed. I was sailing the Penguin one day when an LS13 came alongside and the skipper told me he had a customer who was looking for a Penguin and asked if I’d be interested in trading mine for an LS13. I (foolishly) assumed he meant a straight-up trade and gave him my phone number. He called that night and offered me $300 for the Penguin, but also offered to help me finance the LS for $30/month. I took him up on it and my only regret is that I didn’t keep that little Lone Star.

Great article. The Wittholz 17 has been on the top of my “someday” projects for a long time.

Re Fiberglassing flat plywood panels. Be aware that plywood with fiberglass is a lot stiffer than a bare piece of plywood. Some designs feature significant conical development and a fiberglassed panel will resist the conical bend. If you find yourself with this problem, the only solution is to remove the fiberglass with a heat gun, install the panel, and then fiberglass in place.

A lot of amateur boatbuilding is figuring out how to correct mistakes!

You raise a good point about flexibility of a fiberglassed panel. Other drawbacks to applying fiberglass to panels before use are that you miss the opportunity to span seams for reenforcement and cutting and planning the edges is hard on tools.

It’s with great interest that I read the article on the Charles Wittholz 17-1/2′ catboat. I own a fiberglass version of this boat, built in 1974 by Cape Cod Shipbuilding, in Wareham, Massachusetts, in 1974. Sailing the Atlantic coast of Nova Scotia is beautiful, but demanding territory for a small craft, but this design is totally up to the task! In the four years I’ve owned this boat, I’ve come to trust its ability to handle open water, and its ability to gunkhole in and around bays and islands, with its shoal draft, and retractable centerboard. My boat has the original gaff-rigged mainsail, with two sets of reef points. I have rigged single-line reefing system, as I single hand the boat, and led the lines back to the cockpit. I have added a boom gallows in place of the removable boom crutch. This also allows for tackle to be rigged to help raise and lower the 6-hp four-stroke outboard on its folding bracket. Other upgrades include cabin-top hatch for ventilation, bulkhead-mounted compass, and marine head. Planned future upgrades include installation of a tabernacle to enhance the trailer-ability of the boat. I would love to hear from readers with plans/photos of how to do this. I would encourage your readers to consider this time-proven design, as a salty, capable, pocket cruiser that’s well worth the time and effort to build!

I live in Portland Oregon, turned 80 in November and own a 17ft. Whitholz/Herman Cat. It needs some small attention anyone wanting to share information or look at my little project feel free to contact me*. Just read the article about Whitholz. I just saw the photo of Sandy Shaffer’s boat in your magazine and it would be nice to talk to her.

*Leave a comment here. We’ll forward it. —Ed.

The article about the Wittholz 17′ Catboat naturally interested me. In my opinion, it is the best looking and most useful of any 17’ boat I have ever seen. It is just good to look at; Wittholz had the nautical eye. To achieve a good-looking boat in something so short and squatty is a miracle. It is the mark of a real artist. I think his little 17-footer answers all of the desiderata. And for me, it even satisfies my love of engines, in having an inboard diesel. But it is also my eye that is pleased. I love the perfection of his retroussé bow. It is just right. I met Charles W. Wittholz. He was unpretentious, just a boat guy who had great talent. Conversation was easy with him. My buddy Tony used to have a catalog of his steel boat plans. Sadly, Tony threw that catalog away. I wish I had it. The catboat would not have been included in those plans. And because I had seen that catalog long before I had seen my own catboat and long before I met Wittholz, I associated him with steel yachts. Tony loved his 42’ketch. He thought of building it or having it built by Dennis Schreiber. We were visiting Schreiber in St. Augustine at the time when Wittholz just happened to stop by to talk with Schreiber, who was building one of his steel boat designs at that time. Wittholz was a normal-sized man, wearing shorts and just a plain short sleeved shirt and looking like an everyday guy. He wore glasses. His hair was dirty blond. You could see how much he loved boats in every word he said. He quizzed Shreiber on whether his plans needed any reworking. He asked questions on some technical issues of construction. What was obvious is that Wittholz not only wanted his plans to produce a beautiful boat, he wanted the technicalities of construction to be good. Strength, convenience, maintainability, and practicality of construction, were all concerns of his. You could see he did not approach boat designing casually. The very construction of the boat was a matter of importance. I can’t remember for sure, but it is possible that Schreiber told him of some small little tricks he had come up with to deal with a special aspect of the construction. Working with steel, of course, is a lot different than working with wood. And oddly, many of Wittholz’s designs could be built out of wood as well as steel. For example, my friend Tony has both the wood plans and the steel plans for Wittholz’s 42-footer Cutter/Ketch yacht. This babe is everything a man could want in a yacht. It was Wittholz’s answer to the SPRAY. Want to sail the Magellan Strait? It could do it. Until meeting Wittholz, I had always imagined a naval architect as being a very formal man, on the order of Phillip Rhodes or Nat Herreshoff. But in Wittholz, I was seeing a man who could be out there in the boat yard painting his boat. But once he started to talk, you knew you were dealing with the real thing. Surely, he is among the truly talented boat designers. I do value it highly that I met Charles W. Wittholz.

Great advice about reefing. Sailing a Herreshoff America 18 in Florida’s intracoastal, I would take in one reef before leaving the somewhat sheltered dock and shake it out when I reached open water if the breeze was light. That was much easier, single handed, than the other way around.

A beautiful boat, a true pocket cruiser. Excellent write up. I, too, have pored over the plans for many an hour; now, if we did not already own two catboats….

I would offer this as a possible approach to hinging your mast: you may wish to read Dave McCulloch’s article in which he uses three 1/4” SS plates with bolts and pins on his 4” diameter Marsh Cat mast. He has a similar system on his Kingston Lobsterboat. See WoodenBoat #237 M/A 2014 page 38 “A Simple In-Mast Hinge.” Note that he added side stays. I have seen his installation; it is clean and neat. He brought the boat to a Mid-Atlantic Small Craft Festival to much acclaim. You may wish to check with David regarding plate size for taller masts. I have a set of plates all cut out but can’t bring myself to saw my mast in half. Bill Rutherford CACTUS WREN

Could Bill Rutherford put me on to Bill McCulloch? I am building a Marsh Cat and plan to use a tabernacle for the mast. After much noodling, l’ve reinforced the deck from underneath using a piece of an old 4″D bird’s-mouth mast perched on the oak mast step and an oak deck pad. The tabernacle design is still in the works. Cheers, Robert Hale PS: I cruised on a steel Wittholz Departure 35 from Guatemala to Gulfport, Miss. Good sea boat.

I recently got an early Ted Herman version of the Wittholz 17, with the Marconi rig.

I recently restored my ’71 Herman 17 with a Marconi rig. I’m concerned with the mast bend I get in the upper portion at the diamond shrouds when close hauled under full sail. Being a sloop sailer for years, I am not familiar with tuning this setup. Diamand shrouds are not adjustable but possibly have stretched?

I am in the process of buying a 1973 Wittholz/Cape Cod Shipbuilding Catboat, so Monte Copeland’s article is very valuable. As a fellow Austinite, I would love to meet or speak with him.

Chris, I always look forward to the 1st of each month and the new issue of Small Boats Magazine . The ARCHIVE feature is an incredible bonus, especially for those of us of a “certain age,” since we can read again those articles of a few years back that seem as new as the latest issue!

I’m looking to build the 14′ or 17′ Wittholz cat boat and wondering what would be involved in using cedar strip and instead of plywood to get the rounded lines?

I built a Wittholz 17′ cat at around the same time as Monte Copeland and have been sailing it in Belfast Lough (the original one in Northern Ireland) for some 14 years now. I was able to exchange a few emails with Monte at the time we were building, which helped a lot to encourage me to keep going! I also had great advice from Dan Whiteneck who was building one near Boston, but I have unfortunately lost touch with him. The boat attracts admiring looks and compliments from all who see her and has become part of my life. Looking forward now to the summer for leisurely and surprisingly quick sailing in my unique Wittholz cat.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Stay On Course

More From This Issue

From The Editor

“Not because they are easy”

The president’s declaration led to Neil Armstrong making the first footprint on the lunar surface less than seven years later. And getting to that point was hard, even for a…

Designed to be light, the Savo 650D’s keelson, gunwales, and frames are made of pine or spruce. The fully equipped boat weighs in at just over 100 lbs. The length…

The plans for the 17′ 1″ plywood catboat include 11 sheets with good construction detail: materials, dimensions, fastening schedules, notes, and comments. Several alternatives are included: self-bailer instead of deep…

Don’t Tell Me I Can’t

“A little too big” came back to me as I stood in a lumberyard collecting the first of the materials for building a Greenland skin-on-frame kayak, but the echoes of…

Waxed Canvas

DuraWax comes in two grades: light, which is treated with paraffin wax, and heavy, treated with beeswax. Both have the same underlying 12-oz cotton-duck fabric and, in both, the added…

Product Reviews

LEDs for Trailers

LEDs, light-emitting diodes, provide bright lighting for trailers, much brighter than incandescent bulbs, making trailer lights more visible even during daytime towing. This is especially important with tail lights tucked…

Harken Roller Furlers

I'm very happy with the performance of these furlers on my boat. Managing the headsails has become so easy that I rarely motor into or out of my mooring, opting…

KATHI LENETTE

Two years after being given the kit, Dave was ready to start and pulled the plywood pieces out of the box they’d been shipped in. The visions of his dream…

More Boat Profile

Parker Dinghy

Having had my sights set on building a plank-on-frame rowboat in the 12′ to 16′ range, I was immediately sold on the Parker Dinghy when I saw her lines. I…

I wanted to learn how to sail, and was looking for a boat I could easily manage singlehanded and that had enough room for a few friends to join in…

A cruising sailboat in the 20′ to 22′ range resides at the high end of the spectrum that most amateur boatbuilders can realistically aspire to. Go bigger and you need…

Drake Raceboat

Clint Chase of Chase Small Craft wrote of the Drake Raceboat: “This was the first boat that I designed totally from the numbers.” It’s the third in his series of…

Subscribe Today!

Become a subscriber today and you’ll recieve a new issue every month plus unlimited access to our full archive of backlogged issues.

Already a subscriber?   Sign In

Subscribe For Full Access

Flipbooks are available to paid subscribers only. Subscribe now or log in for access.

Yachting Monthly

• Digital edition

25 of the best small sailing boat designs

• Nic Compton
• August 10, 2022

Nic Compton looks at the 25 yachts under 40ft which have had the biggest impact on UK sailing

There’s nothing like a list of best small sailing boat designs to get the blood pumping.

Everyone has their favourites, and everyone has their pet hates.

This is my list of the 25 best small sailing boat designs, honed down from the list of 55 yachts I started with.

I’ve tried to be objective and have included several boats I don’t particularly like but which have undeniably had an impact on sailing in the UK – and yes, it would be quite a different list if I was writing about another country.

If your favourite isn’t on the best small sailing boat designs list, then send an email to [email protected] to argue the case for your best-loved boat.

Ready? Take a deep breath…

Credit: Bob Aylott

Laurent Giles is best known for designing wholesome wooden cruising boats such as the Vertue and Wanderer III , yet his most successful design was the 26ft Centaur he designed for Westerly, of which a remarkable 2,444 were built between 1969 and 1980.

It might not be the prettiest boat on the water, but it sure packs a lot of accommodation.

The Westerly Centaur was one of the first production boats to be tank tested, so it sails surprisingly well too. Jack L Giles knew what he was doing.

Colin Archer

Credit: Nic Compton

Only 32 Colin Archer lifeboats were built during their designer’s lifetime, starting with Colin Archer in 1893 and finishing with Johan Bruusgaard in 1924.

Yet their reputation for safety spawned hundreds of copycat designs, the most famous of which was Sir Robin Knox-Johnston ’s Suhaili , which he sailed around the world singlehanded in 1968-9.

The term Colin Archer has become so generic it is often used to describe any double-ender – so beware!

Contessa 32

Assent ‘s performance in the 1979 Fastnet Race makes the Contessa 32 a worth entry in the 25 best small sailing boat designs list. Credit: Nic Compton

Designed by David Sadler as a bigger alternative to the popular Contessa 26, the Contessa 32 was built by Jeremy Rogers in Lymington from 1970.

The yacht’s credentials were established when Assent , the Contessa 32 owned by Willy Kerr and skippered by his son Alan, became the only yacht in her class to complete the deadly 1979 Fastnet Race .

When UK production ceased in 1983, more than 700 had been built, and another 20 have been built since 1996.

Cornish Crabber 24

It seemed a daft idea to build a gaff-rigged boat in 1974, just when everyone else had embraced the ‘modern’ Bermudan rig.

Yet the first Cornish Crabber 24, designed by Roger Dongray, tapped into a feeling that would grow and grow and eventually become a movement.

The 24 was followed in 1979 by the even more successful Shrimper 19 – now ubiquitous in almost every harbour in England – and the rest is history.

Drascombe Lugger

Credit: David Harding

There are faster, lighter and more comfortable boats than a Drascombe Lugger.

And yet, 57 years after John Watkinson designed the first ‘lugger’ (soon changed to gunter rig), more than 2,000 have been built and the design is still going strong.

More than any other boat, the Drascombe Lugger opened up dinghy cruising, exemplified by Ken Duxbury’s Greek voyages in the 1970s and Webb Chiles’s near-circumnavigation on Chidiock Tichbourne I and II .

The 26ft Eventide. Credit: David Harding

It’s been described as the Morris Minor of the boating world – except that the majority of the 1,000 Eventides built were lovingly assembled by their owners, not on a production line.

After you’d tested your skills building the Mirror dinghy, you could progress to building a yacht.

And at 24ft long, the Eventide packed a surprising amount of living space.

It was Maurice Griffiths’ most successful design and helped bring yachting to a wider audience.

You either love ’em or you hate ’em – motorsailers, that is.

The Fisher 30 was brought into production in 1971 and was one of the first out-and-out motorsailers.

With its long keel , heavy displacement and high bulwarks, it was intended to evoke the spirit of North Sea fishing boats.

It might not sail brilliantly but it provided an exceptional level of comfort for its size and it would look after you when things turned nasty.

Significantly, it was also fitted with a large engine.

Credit: Rupert Holmes

It should have been a disaster.

In 1941, when the Scandinavian Sailing Federation couldn’t choose a winner for their competition to design an affordable sailing boat, they gave six designs to naval architect Tord Sundén and asked him to combine the best features from each.

The result was a sweet-lined 25ft sloop which was very seaworthy and fast.

The design has been built in GRP since the 1970s and now numbers more than 4,000, with fleets all over the world.

Credit: Kevin Barber

There’s something disconcerting about a boat with two unstayed masts and no foresails, and certainly the Freedom range has its detractors.

Yet as Garry Hoyt proved, first with the Freedom 40, designed in collaboration with Halsey Herreshoff, and then the Freedom 33 , designed with Jay Paris, the boats are simple to sail (none of those clattering jib sheets every time you tack) and surprisingly fast – at least off the wind .

Other ‘cat ketch’ designs followed but the Freedoms developed their own cult following.

Hillyard 12-tonner

The old joke about Hillyards is that you won’t drown on one but you might starve to death getting there.

And yet this religious boatbuilder from Littlehampton built up to 800 yachts which travelled around the world – you can find them cruising far-flung destinations.

Sizes ranged from 2.5 to 20 tons, though the 9- and 12-ton are best for long cruises.

The innovations on Jester means she is one of the best small sailing boat designs in the last 100 years. Credit: Ewen Southby-Tailyour

Blondie Hasler was one of the great sailing innovators and Jester was his testing ground.

She was enclosed, carvel planked and had an unstayed junk rig.

Steering was via a windvane system Hasler created.

Hasler came second in the first OSTAR , proving small boats can achieve great things.

Moody kicked off the era of comfort-oriented boats with its very first design.

The Moody 33, designed by Angus Primrose, had a wide beam and high topside to produce a voluminous hull .

The centre cockpit allowed for an aft cabin, resulting in a 33-footer with two sleeping cabins – an almost unheard of concept in 1973 –full-beam heads and spacious galley.

What’s more, her performance under sail was more than adequate for cruising.

Finally, here was a yacht that all the family could enjoy.

Continues below…

What makes a boat seaworthy?

What characteristics make a yacht fit for purpose? Duncan Kent explores the meaning of 'seaworthy' and how hull design and…

How boat design is evolving

Will Bruton looks at the latest trends and innovations shaping the boats we sail

How keel type affects performance

James Jermain looks at the main keel types, their typical performance and the pros and cons of each

Boat handling: How to use your yacht’s hull shape to your advantage

Whether you have a long keel or twin keel rudders, there will be pros and cons when it comes to…

Nicholson 32

Credit: Genevieve Leaper

Charles Nicholson was a giant of the wooden boat era but one of his last designs – created with his son Peter – was a pioneering fibreglass boat that would become an enduring classic.

With its long keel and heavy displacement, the Nicholson 32 is in many ways a wooden boat built in fibreglass – and indeed the design was based on Nicholson’s South Coast One Design.

From 1966 to 1977, the ‘Nic 32’ went through 11 variations.

Credit: Hallberg-Rassy

In the beginning there was… the Rasmus 35. This was the first yacht built by the company that would become Hallberg-Rassy and which would eventually build more than 9,000 boats.

The Rasmus 35, designed by Olle Enderlein, was a conservative design, featuring a centre cockpit, long keel and well-appointed accommodation.

Some 760 boats were built between 1967 and 1978.

Credit: Larry & Lin Pardey

Lyle Hess was ahead of his time when he designed Renegade in 1949.

Despite winning the Newport to Ensenada race, the 25ft wooden cutter went largely unnoticed.

Hess had to build bridges for 15 years before Larry Pardey asked him to design the 24ft Seraffyn , closely based on Renegade ’s lines but with a Bermudan rig.

Pardey’s subsequent voyages around the world cemented Hess’s reputation and success of the Renegade design.

Would the Rustler 36 make it on your best small sailing boat list? Credit: Rustler Yachts

Six out of 18 entries for the 2018 Golden Globe Race (GGR) were Rustler 36s, with the top three places all going to Rustler 36 skippers.

It was a fantastic endorsement for a long-keel yacht designed by Holman & Pye 40 years before.

Expect to see more Rustler 36s in the 2022 edition of the GGR!

It was Ted Heath who first brought the S&S 34 to prominence with his boat Morning Cloud .

In 1969 the yacht won the Sydney to Hobart Race, despite being one of the smallest boats in the race.

Other epic S&S 34 voyages include the first ever single-handed double circumnavigation by Jon Sanders in 1981

Credit: Colin Work

The Contessa 32 might seem an impossible boat to improve upon, but that’s what her designer David Sadler attempted to do in 1979 with the launch of the Sadler 32 .

That was followed two years later by the Sadler 29 , a tidy little boat that managed to pack in six berths in a comfortable open-plan interior.

The boat was billed as ‘unsinkable’, with a double-skinned hull separated by closed cell foam buoyancy.

What’s more, it was fast, notching up to 12 knots.

Credit: Dick Durham/Yachting Monthly

Another modern take on the Contessa theme was the Sigma 33, designed by David Thomas in 1979.

A modern underwater body combined with greater beam and higher freeboard produced a faster boat with greater accommodation.

And, like the Contessa, the Sigma 33 earned its stripes at the 1979 Fastnet, when two of the boats survived to tell the tale.

A lively one-design fleet soon developed on the Solent which is still active to this day.

A replica of Joshua Slocum’s Spray . Credit: Alamy Stock Photo

The boat Joshua Slocum used for his first singlehanded circumnavigation of the world wasn’t intended to sail much further than the Chesapeake Bay.

The 37ft Spray was a rotten old oyster sloop which a friend gave him and which he had to spend 13 months fixing up.

Yet this boxy little tub, with its over-optimistic clipper bow, not only took Slocum safely around the world but has spawned dozens of modern copies that have undertaken long ocean passages.

Credit: James Wharram Designs

What are boats for if not for dreaming? And James Wharram had big dreams.

First he sailed across the Atlantic on the 23ft 6in catamaran Tangaroa .

He then built the 40ft Rongo on the beach in Trinidad (with a little help from French legend Bernard Moitessier) and sailed back to the UK.

Then he drew the 34ft Tangaroa (based on Rongo ) for others to follow in his wake and sold 500 plans in 10 years.

Credit: Graham Snook/Yachting Monthly

The Twister was designed in a hurry.

Kim Holman wanted a boat at short notice for the 1963 season and, having had some success with his Stella design (based on the Folkboat), he rushed out a ‘knockabout cruising boat for the summer with some racing for fun’.

The result was a Bermudan sloop that proved nigh on unbeatable on the East Anglian circuit.

It proved to be Holman’s most popular design with more than 200 built.

Credit: Alamy Stock Photo

Laurent Giles’s design No15 was drawn in 1935 for a Guernsey solicitor who wanted ‘a boat that would spin on a sixpence and I could sail single-handed ’.

What the young Jack Giles gave him was a pretty transom-sterned cutter, with a nicely raked stem.

Despite being moderate in every way, the boat proved extremely able and was soon racking up long distances, including Humphrey Barton’s famous transatlantic crossing on Vertue XXXV in 1950.

Wanderer II and III

Credit: Thies Matzen

Eric and Susan Hiscock couldn’t afford a Vertue, so Laurent Giles designed a smaller, 21ft version for them which they named Wanderer II .

They were back a few years later, this time wanting a bigger version: the 30ft Wanderer III .

It was this boat they sailed around the world between 1952-55, writing articles and sailing books along the way.

In doing so, they introduced a whole generation of amateur sailors to the possibilities of long-distance cruising.

Westerly 22

The origins of Westerly Marine were incredibly modest.

Commander Denys Rayner started building plywood dinghies in the 1950s which morphed into a 22ft pocket cruiser called the Westcoaster.

Realising the potential of fibreglass, in 1963 he adapted the design to create the Westerly 22, an affordable cruising boat with bilge keels and a reverse sheer coachroof.

Some 332 boats were built to the design before it was relaunched as the Nomad (267 built).

Enjoyed reading 25 of the best small sailing boat designs?

A subscription to Yachting Monthly magazine costs around 40% less than the cover price .

Print and digital editions are available through Magazines Direct – where you can also find the latest deals .

YM is packed with information to help you get the most from your time on the water.

• Take your seamanship to the next level with tips, advice and skills from our experts
• Impartial in-depth reviews of the latest yachts and equipment
• Cruising guides to help you reach those dream destinations

Follow us on Facebook , Twitter and Instagram.

How Much Does a Wooden Sailboat Cost? (17 Examples)

The cost of wooden sailboats depends on their size, age, condition, and any special features or equipment they have. In some cases, they can be less expensive than fiberglass or aluminum boats, but they can also be more expensive due to the high level of craftsmanship needed. To give you an idea of how much these classic sailboats cost, this article will provide 17 examples of different wooden sailboat models and their estimated price range.

A small wooden sailboat can cost around $5,000, while a larger, more elaborate wooden sailboat can cost upwards of $100,000. The average price range for a wooden sailboat is between $20,000 and $100,000. These boats are usually in good condition and may come with some upgrades or amenities.

The William Fife III-designed schooner is one of the highest-priced wooden sailboats, costing around $5,000,000 to $10,000,000. Let's take a look at more specific wooden sailboat models and their estimated cost range.

• There are wooden sailboats that cost as little as $5,000 to $10,000, such as the Northeaster Dory and Nutshell Pram.
• Some of the wooden sailboats are usually priced between $50,000 and $100,000, such as the Concordia yawl, Malabar II, Buzzards Bay 25, and the Sparkman & Stephens' sloop.
• Shamrock V was a J-Class yacht, considered to be a large, fast, and highly-priced yacht, and was considered the pinnacle of yacht racing during the 1930s.
• Next to William Fife III's schooner, his gaff cutter design is also highly sought after and is priced as high as $1,000,000–$5,000,000.
• The Ingrid Ketch is a double-ended sailboat that is typically constructed from wood and could cost anywhere from $50,000 to over $200,000.

17 Examples of Wooden Sailboats and Their Estimated Costs

Below is a table showing the estimated costs of 17 different wooden sailboats:

1. Beetle Cat is a classic wooden sailboat

Beetle Cat is a classic wooden sailboat that was originally designed by John Beetle in 1921. These boats were originally used by fishermen in Cape Cod and Martha's Vineyard but quickly became popular among recreational sailors due to their simplicity and ease of use.

The Beetle Cat is a gaff-rigged catboat , which means it has a single sail and a mast that is set up at a steep angle. The boat is typically 12-14 feet long and can comfortably accommodate 2-3 people.

Today, Beetle Cats are still popular among sailors and are often used for racing or leisurely cruising. The estimated cost of a new Beetle Cat is around $10,000 - $20,000.

2. Herreshoff 12 1/2 is a beautiful and versatile wooden sailboat

Herreshoff 12 1/2 is a classic wooden sailboat designed by Nathanael Herreshoff in 1914. The boat is 15 feet long and has a beam of 6 feet, making it easy to handle and maneuver in the water.

It is known for its stability and seaworthiness, so it is an excellent choice for sailors of all skill levels. The boat's classic lines and wooden construction make it a timeless beauty that is sure to turn heads on the water. A new Herreshoff 12 1/2 is around $15,000 - $25,000.

3. The Cape Dory Typhoon is a wooden sailboat perfect for cruising or day sailing

The Cape Dory Typhoon is a small boat, measuring just 18 feet in length, but it is surprisingly spacious and comfortable. It has a roomy cockpit that can accommodate up to four people and a cozy cabin that provides shelter and storage for overnight trips.

The boat is designed to be easily handled by one or two people, making it an ideal choice for solo sailors or couples. It is also built from high-quality materials, including hand-laid fiberglass and marine-grade plywood.

The hull is reinforced with a fiberglass mat, which adds strength and durability. The boat's rigging is also well-designed, with a simple and efficient sail plan that allows for easy handling and good performance in a variety of conditions. The estimated cost of a Cape Dory Typhoon is $10,000 - $20,000

4. The Chesapeake Light Craft Northeaster Dory is a beautiful wooden sailboat

The Chesapeake Light Craft Northeaster Dory is a classic wooden sailboat that is both beautiful and functional. It is a traditional design that has been used for centuries by fishermen and sailors, and it is known for its stability and seaworthiness.

This boat is versatile and can be used for a variety of purposes, including fishing, cruising, and racing. It is made of high-quality marine plywood and epoxy, which makes it strong and durable. The estimated price of a new Chesapeake Light Craft Northeaster Dory is around $5,000 - $10,000.

5. Nutshell Pram is a small wooden sailboat

Nutshell Pram is a small, lightweight boat perfect for a variety of uses, including rowing, sailing, and motoring. It has a classic, beautiful, and functional design and is known also for its stability and ease of use.

The Nutshell Pram is typically built using marine plywood and epoxy, which makes it strong and durable while also keeping it lightweight. The boat is designed to be easy to build, even for those with limited woodworking experience, and it can be customized to suit the needs and preferences of the owner.

If you're looking at building a sailboat , here's how much it can cost you.

This boat is also highly portable so it is easy to transport to different bodies of water or to store when not in use. The estimated cost for this sailboat is around $5,000 - $10,000.

6. The Eric is a sloop-rigged wooden sailboat

The Eric is a classic wooden sailboat designed in the 1930s by William Atkin, a renowned naval architect who specialized in designing sailboats. It is a sloop-rigged sailboat - having a single mast with a mainsail and a jib.

The Eric's 32-foot length makes it a great size for cruising or racing, and its spacious interior can comfortably accommodate up to six people. It has a full galley, a head, and plenty of storage space which makes it a great choice for extended sailing trips.

While the Eric is a classic design, it's still a popular choice among sailors today, costing anywhere from $10,000 - $20,000.

7. The Concordia yawl is a favorite among enthusiasts of classic wooden boats

The Concordia Yawl was first designed by William Hand in 1938 and was built by Concordia Company in Massachusetts, USA. The yacht became famous for its excellent sailing performance, seaworthiness, and classic lines.

It has a full keel and a moderate displacement, which provides a smooth and stable ride even in rough seas. The yacht's rigging features a tall mast and a large sail area, which allows it to sail fast and efficiently.

Over the years, the Concordia Yawl has won numerous races and regattas, including the Newport-Bermuda Race, the Marblehead-to-Halifax Race, and the Chicago-Mackinac Race. The yacht's classic design and timeless beauty have also made it a favorite among collectors and enthusiasts of classic wooden boats. This sailboat is usually priced at $50,000 - $100,000.

8. Malabar II is a spacious wooden sailboat perfect for cruising

With a length of 38 feet, this boat is spacious and comfortable and can accommodate up to six people. It also has a sleek and elegant exterior design that's sure to turn heads out on the water. Its wooden construction gives it a classic look, while its modern features make it a practical choice for today's sailors.

The Malabar II is also known for its excellent performance, with a fast and stable ride that's perfect for both racing and cruising. It is highly sought after by sailing enthusiasts all over the world and costs around $50,000 - $100,000

9. Buzzards Bay 25 is another highly sought-after wooden sailboat

The Buzzards Bay 25 is a classic wooden sailboat designed by Nathanael Herreshoff in the early 1900s. It is a gaff-rigged sloop with a full keel and a displacement of around 6,000 pounds.

The hull of this boat is made of wood, and the deck is typically finished with teak or mahogany. The boat has a spacious cockpit and a comfortable cabin below deck, making it a great choice for weekend cruising or longer trips.

While original models of this boat are rare and expensive, costing around $50,000 - $100,000, there are several modern replicas and adaptations available that capture the spirit and beauty of the original design.

10. Sparkman & Stephens sloop is an elegantly designed wooden sailboat

The Sparkman & Stephens-designed sloop is a classic sailboat designed by the renowned naval architecture firm Sparkman & Stephens. The boat is 36 feet long and features a sleek, elegant design with a long waterline and moderate displacement.

The sloop rig is simple and efficient, consisting of a single mast with a mainsail and a headsail. The boat is well-suited for cruising and racing, with a comfortable interior and excellent sailing performance. The estimated cost for this wooden sailboat is around $50,000-$100,000.

11. The William Fife III Bermudan cutter is one of the most iconic sailing yachts

The William Fife III Bermuda Cutter is a classic sailing yacht designed by the famous Scottish yacht designer William Fife III. The yacht was built in 1910 and is considered one of the most beautiful and iconic sailing yachts ever built.

This boat features a tall, narrow rig with a triangular mainsail and jib, which allows the yacht to sail close to the wind and achieve high speeds. This design was built for Sir Ernest Roney, a wealthy British businessman, and was originally named "Mariquita". The yacht was used for racing and was very successful, winning many races in the UK and Europe.

After changing hands several times, the yacht was eventually restored in the 1990s and is now a popular attraction at sailing events and regattas around the world. This wooden sailing yacht costs around $100,000 - $200,000.

12. Sparkman & Stephens yawl is regarded as a classic and timeless design

One famous design of the company Sparkman & Stephens is their yawl, which is a type of sailing yacht that features two masts , with the aft mast being shorter than the forward mast. This design provides a number of advantages, including better balance and maneuverability, as well as improved sail handling.

It was first introduced in the 1930s and quickly became popular among sailors who appreciated its elegant lines and excellent sailing performance. Over the years, many different versions of the yawl have been produced, each with its own unique features and characteristics. These wooden sailboats are priced around $500,000 - $1,000,000.

13. William Fife III's gaff cutter is considered a classic of the sailing world

The William Fife III Gaff Cutter is a classic sailing yacht designed by the renowned Scottish yacht designer William Fife III. It was built in 1905 for the wealthy Scottish yachtsman James Paton, and was originally named "Mignonette."

The yacht is 23.2 meters long and has a beam of 4.2 meters. It is constructed of wood and has a sleek, elegant design that is typical of Fife's work.

The William Fife III Gaff Cutter was used for racing and cruising by Paton and his family for many years and was later sold to a number of other owners. In the 1960s, the yacht was purchased by the famous British yachtsman Uffa Fox, who restored it to its original condition and sailed it in a number of regattas.

Today, the William Fife III Gaff Cutter is considered a classic of the sailing world and is highly sought after by collectors and enthusiasts. The estimated price for this sailboat is around $1,000,000 - $5,000,000.

14. William Fife's schooner is one of the most expensive wooden sailboats

The William Fife III Schooner, also known as the "Adventuress" was built in 1913 for the American businessman John Borden II. It is a 32-meter (133-foot) wooden schooner with a beam of 6.4 meters (21 feet).

This boat is known for its elegant design and its history of environmental activism. After being used for racing and cruising by Borden and his family, the yacht was sold to a number of other owners and eventually fell into disrepair.

In the 1950s, it was purchased by the Seattle-based non-profit organization Sound Experience, which restored it to its former glory and used it as a platform for environmental education and advocacy.

Today, the "Adventuress" is still owned and operated by Sound Experience, and it continues to sail the waters of the Pacific Northwest, educating people about the importance of environmental stewardship and conservation. This wooden yacht is priced at $5,000,000 - $10,000,000.

15. The Atkin-designed Ingrid Ketch is a traditional wooden sailboat

Ingrid Ketch is a classic wooden sailboat that was first introduced in the 1960s. The boat was designed by William Atkin, a renowned naval architect who is known for his classic boat designs.

The Ingrid Ketch is a double-ended sailboat that is typically constructed from wood, although some later models have been built using fiberglass. The boat is known for its sturdy construction, excellent seaworthiness, and classic lines.

A well-maintained Ingrid Ketch in good condition could cost anywhere from $50,000 to over $200,000, depending on its age, condition, and location.

16. Shamrock V is a famous wooden sailboat used for racing

Shamrock V is a famous racing yacht that was built in 1930 for Sir Thomas Lipton's fifth and final America's Cup challenge. The yacht was designed by Nicholson and built by Camper and Nicholson in Gosport, England.

Shamrock V was a J-Class yacht, which was a type of racing yacht used in the America's Cup during the 1930s. The J-Class yachts were large, fast, and expensive, and were considered the pinnacle of yacht racing at the time.

This boat is 120 feet long and has a crew of 40, a sleek hull, and tall masts. Despite her impressive appearance, Shamrock V was not successful in the America's Cup and was later sold and changed hands several times.

She was eventually abandoned in a harbor in Ireland in the 1980s but was restored in the 1990s and is now a popular charter yacht.

17. Bluenose is a famous wooden schooner

Bluenose is a famous racing and fishing schooner that was built in 1921 in Lunenburg, Nova Scotia, Canada. The schooner was designed by William Roué and built by Smith and Rhuland.

Bluenose was originally built as a racing yacht, and quickly gained a reputation as one of the fastest and most competitive schooners in the world. She won the International Fishermen's Trophy, a prestigious sailing competition between the fishing fleets of Canada and the United States, for 17 consecutive years.

In addition to her racing success, it was also used as a fishing vessel and was renowned for her speed and efficiency in the harsh waters of the North Atlantic.

Leave a comment

You may also like, how long does it take to build a wooden boat (hand-made).

The process of building a wooden boat by hand has remained largely unchanged for centuries. It is not just about the final product but also the journey and …

How Much Does It Cost to Build a Wooden Boat?

How Long Does It Take to Build a Sailboat? (DIY vs. Shipyard)

Sailboat keel types: illustrated guide (bilge, fin, full).

How Much Does It Cost to Build a Sailboat?

Own your first boat within a year on any budget.

A sailboat doesn't have to be expensive if you know what you're doing. If you want to learn how to make your sailing dream reality within a year, leave your email and I'll send you free updates . I don't like spam - I will only send helpful content.

Ready to Own Your First Boat?

Just tell us the best email address to send your tips to:

Building the Shilling (a 17' wooden sailboat)

Courtney & Tara are building a Willow Bay "Shilling" - a 17 foot (length-on-deck) wooden day-sailer. This blog will document construction details and progress, from ordering study plans to launch day and beyond.

Friday, December 7, 2012

• Annual updates are kind of pathetic...

Friday, September 23, 2011

Major update, or "sorry it's been forever".

Thursday, January 21, 2010

News update, saturday, october 3, 2009, finished guitar cabinet.

Sunday, September 27, 2009

This is looking awesome.

Sunday, September 20, 2009

Introducing: the moaning chair.

Monday, September 14, 2009

Guitar humidifier cabinet begins.

The Shilling

Who's building this thing?

But what's her NAME?

Friends and such.

• Barrett's Boatbuilding Blog
• Big Rock - aley goodness
• Courtney's brother's boat, Island Eagle
• Craft A Craft - BIG boat design, building, & cruising site
• Half Pints - LOCAL aley goodness!
• Nightfall's Twilight Zone
• Port Townsend Wooden Boat Festival
• Ron's sailing adventures!
• Sailing Margherita - willowbayboy's Shilling
• Spokaloo's Boatbuilding Blog
• Tad Roberts - yacht design
• The Shipyard School Raid
• The Unlikely Boatbuilder - another build blog
• Venus Murphy (Courtney's former band)
• Willow Bay Boats - home of the Shilling
• Wooden Boat online forum

Blog Archive

• ►  September (1)
• ►  January (1)
• ►  October (1)
• ►  September (5)
• ►  May (2)
• ►  March (1)
• ►  February (1)
• ►  December (2)
• ►  November (1)
• ►  September (4)
• ►  August (4)
• ►  July (2)
• ►  June (4)
• ►  May (3)
• ►  April (3)
• ►  March (5)
• ►  February (3)
• ►  January (3)
• ►  December (3)
• ►  November (3)
• ►  October (5)
• ►  September (2)
• ►  June (1)
• ►  April (6)
• ►  March (3)
• ►  February (4)
• ►  January (7)
• ►  December (8)

• CUSTOM WOODEN BOATS
• WOODEN BOAT RESTORATION
• BLOCKS and CLASSIC BRONZE HARDWARE
• MAST HOOPS and WOODEN HARDWARE
• AUTHENTIC NAUTICAL FURNISHINGS

Pert Lowell Co., Inc. > Custom Wooden Boats > Swampscott Dory

Swampscott Dory

last modified 22 November 2012  —  Copyright © 2012  —  Pert Lowell Co., Inc.  —  All rights reserved.

WOODEN SAILBOATS FOR SALE

Click image to view more information.

Duckling 17

Devlin Boats , Kits , Rowing & Paddling Boats

At 95 lbs. the Duckling 17 is a very car-toppable boat, easy for one person to handle. Folding pattern oarlocks and eight foot spoon blade oars give her a lot of power.

You can read more about the Devlin Duckling 17 rower in this article by Small Boats Monthly .

The Duckling 17 is available in   study and construction plans , and a precision   CNC cut kit .

Notice to our valued Devlin Boat customers

As always, if you have any questions about orders (past or present), don’t hesitate to get in touch!

Featured Products

Artfully Designed and Crafted Boats since 1978

Shop tours on Fridays by appointment

Pin It on Pinterest

Step-By-Step Guide: How to Build a Wooden Sailboat – Complete DIY Tutorial

Alex Morgan

Building a wooden sailboat is a rewarding and fulfilling endeavor that allows you to create your own vessel for sailing adventures. Whether you’re a seasoned sailor or a woodworking enthusiast, constructing a wooden sailboat requires careful planning, attention to detail, and a love for craftsmanship. This comprehensive guide will take you through the step-by-step process of building a wooden sailboat, from choosing the right design and gathering the necessary materials to assembling the framework, building the deck and cabin, and installing the sails and rigging. We will also discuss the finishing touches and regular maintenance required to keep your wooden sailboat in optimal condition for years of enjoyment on the water. Let’s dive into the world of wooden sailboat construction and embark on this exciting journey together.

Key takeaways:

Key takeaway:

• Choosing the right design and plans is crucial: Research different sailboat designs and select suitable plans based on your skill level to ensure a successful project.
• Gather the necessary materials and tools: Pay attention to wood selection and preparation, as well as acquiring the tools and equipment needed for building your wooden sailboat.
• Attention to detail in the construction process is important: Prepare and assemble the framework carefully, focusing on lofting, laying out the keel, constructing the ribs, and the hull structure to ensure a sturdy and reliable sailboat.

Choosing the Right Design and Plans

When it comes to building a wooden sailboat, one of the crucial steps is choosing the right design and plans. In this section, we’ll take a deep dive into the world of sailboat designs and explore the vast array of options available. From researching different sailboat designs to selecting plans that match your skill level, we’ll guide you through the exciting process of bringing your wooden sailboat dream to life. So, hop aboard and let’s set sail on this exhilarating journey of craftsmanship and adventure.

Researching Different Sailboat Designs

When conducting research on sailboat designs, it is important to take into account a variety of factors in order to select the most suitable design. One of the primary considerations is whether you prefer a monohull or a multihull sailboat. Monohulls are more commonly found and offer superior performance when sailing upwind, whereas multihulls provide both stability and speed.

Another aspect to consider is your level of sailing experience. If you are a beginner, it is advisable to seek out designs that are easier to handle and forgiving. On the other hand, experienced sailors may gravitate towards performance-oriented designs that are ideal for racing or long-distance cruising.

It is crucial to think about how you intend to use the sailboat. Are you looking for a day sailer , a cruiser , or a racing boat ? Each design comes with its own set of distinctive features and characteristics.

Determining the appropriate size of the sailboat is another crucial step, which should be based on the number of people and activities you plan to have on board. You must also decide whether you prefer an open cockpit or an enclosed cabin .

To find the perfect sailboat design that aligns with your sailing goals and preferences, it is imperative to thoroughly research various options and take into consideration all of these factors. By doing so, you will be able to make an informed decision and select the ideal sailboat design.

Selecting Suitable Plans for Your Skill Level

When it comes to building a wooden sailboat, it is crucial to select suitable plans that match your skill level. This is important as it ensures that you have the necessary knowledge and expertise to effectively complete the construction. In order to help you with this, here is a table that outlines the different skill levels and the corresponding plans:

Choosing the right plans for your skill level is essential as it enables you to navigate the construction process smoothly, avoid any complications, and ultimately achieve the desired result. It is crucial to honestly evaluate your woodworking skills and then select plans that align with your abilities. Keep in mind that building a wooden sailboat demands patience , attention to detail , and a willingness to learn and improve your woodworking skills.

As a pro tip, if you are a beginner, it is advisable to start with simpler plans and gradually work your way up to more complex projects. This allows you to gain experience and confidence in your woodworking abilities over time. So always remember to select suitable plans for your skill level and enjoy the process of building your wooden sailboat.

Gathering the Necessary Materials and Tools

When it comes to building a wooden sailboat, gathering the necessary materials and tools is key . In this section, we’ll dive into the exciting world of selecting and preparing the right wood for your sailboat, as well as the essential tools and equipment you’ll need to bring your project to life. So, start sharpening your creativity and let’s sail away into the realm of wooden boat construction!

Wood Selection and Preparation

Incorporating the provided keywords naturally in the provided text:

1. Conduct research on the different types of wood used in boatbuilding, such as mahogany , teak , or oak . This will help you make an informed decision regarding the most suitable wood for your sailboat.

2. Determine the specific requirements of your sailboat design in order to guide your wood selection process. Each design may have different needs and preferences when it comes to the type of wood to be used.

3. Take into consideration the durability and resistance to rot of the wood options available. This is crucial to ensure the longevity and overall quality of your sailboat. Choosing a wood that can withstand exposure to water and other elements is essential.

4. Look for straight , dry , and defect-free wood. This will contribute to the structural integrity of your sailboat. Any defects or irregularities in the wood may compromise its strength and performance.

5. Calculate the amount of wood needed based on the specific design and measurements of your sailboat. This will help you estimate the quantity of wood required for the construction process.

6. Mill or cut the wood into the required dimensions and shapes as outlined in the sailboat design. This step is crucial for achieving the desired structure and appearance of your sailboat.

7. Prior to assembly, it is important to sand the wood surfaces thoroughly. This will remove any rough edges or splinters, ensuring a smooth and safe finish.

8. Apply a protective coating or sealant to the wood in order to prevent water damage. This will help preserve the wood and extend its lifespan .

By following these steps, you can ensure that the wood selected and prepared for your sailboat construction is suitable and of high quality.

Tools and Equipment Needed for the Project

When embarking on the construction of a wooden sailboat, it is crucial to have the appropriate tools and equipment to ensure successful completion.

To accurately measure and obtain precise alignment and dimensions, essential measuring tools such as a tape measure , combination square , and level are indispensable.

For shaping wooden components, cutting tools like a circular saw or table saw , jigsaw , and hand saw are necessary.

Joinery tools, including a chisel set , mallet or hammer , and drill with different-sized bits, are vital for smoothly joining parts together.

To achieve a polished finish, sanding and finishing tools such as sandpaper with varying grits, sanding blocks , and a random orbital sander are crucial.

Additionally, brushes and rollers are required for the application of finishes.

When it comes to safety, it is imperative to prioritize the use of safety goggles , ear protection , a dust mask , and work gloves to ensure personal protection during the construction process.

When selecting tools and equipment, it is essential to invest in high-quality items that are specifically designed for the tasks involved in wooden sailboat building.

By doing so, not only will efficiency be maximized, but the overall quality of the finished boat will also be greatly enhanced.

Preparing and Assembling the Framework

As we delve into the world of building a wooden sailboat, we now find ourselves in the exciting phase of preparing and assembling the framework. In this section, we’ll discover the essential steps that go into setting up the lofting and laying out the keel , as well as the intricacies of constructing the ribs and hull structure. Get ready to immerse yourself in the hands-on process of bringing this magnificent vessel to life!

Setting Up the Lofting and Laying Out the Keel

To properly set up the lofting and lay out the keel for a wooden sailboat, it is important to follow these steps in a systematic manner:

• Firstly, prepare the lofting area by clearing a large, flat space where the plans and measurements will be placed.
• Next, securely attach the keel stock to the lofting platform, making sure it is both level and aligned with the boat’s centerline.
• Using battens, rulers, and pencils, transfer the measurements and lines from the boat plans onto the lofting platform.
• Ensure the accuracy of the waterlines, buttock lines, and other reference lines on the lofting platform by drawing them according to the measurements provided in the boat plans.
• Utilizing the dimensions indicated in the plans, measure and mark the positions of the keel, stem, and transom on the lofting platform.
• Thoroughly examine and adjust all lines and measurements to guarantee their accuracy.
• Identify the locations where any additional frames, bulkheads, or structural elements will connect to the keel, by marking them accordingly.
• Prior to proceeding, double-check all marks and measurements to ensure their accuracy.

The process of setting up the lofting and laying out the keel is an integral step in the construction of a wooden sailboat. It serves as the foundation and reference points for the boat’s overall structure. It is crucial to pay close attention to detail and maintain accuracy throughout the build. By following these steps, you will be on your way to constructing your very own wooden sailboat.

Constructing the Ribs and Hull Structure

When constructing the ribs and hull structure of a wooden sailboat, follow these steps:

– Measure and cut the ribs: Use the plans as a guide to mark and cut the dimensions on the wood. Cut the ribs accurately.

– Attach the ribs to the keel: Position and attach the cut ribs evenly along the keel using marine epoxy and screws.

– Install chines and stringers: Attach the chines to the bottom edge of the boat and install the stringers along the sides for strength.

– Attach the planking: Cut and fit planks to cover the rib and stringer structure, securing them tightly.

– Reinforce the joints: Apply epoxy and fiberglass tape over the joints to strengthen the structure.

– Shape the hull: Use tools to shape and smooth the hull, paying attention to fairing for optimal hydrodynamics.

– Apply a protective finish: Coat the hull and ribs with marine-grade varnish or epoxy for durability.

– Perform a thorough inspection: Check for defects, cracks, or imperfections and make necessary repairs before moving forward.

The process of constructing wooden sailboats has evolved over time, combining traditional techniques with modern materials and tools. Craftsmanship, attention to detail, and an understanding of wood’s properties are still essential in constructing the ribs and hull structure. This blend of artistry and engineering ensures sailboats can withstand the demands of the sea while providing a smooth and enjoyable sailing experience.

Building the Deck and Cabin

Let’s dive into the exciting world of building a wooden sailboat! In this section, we’ll focus on the crucial element of constructing the deck and cabin. Get ready to explore the process of creating the deck framework and adding those essential interior features . From laying the foundation to crafting a cozy cabin space , we’ll uncover the key steps and considerations for bringing your wooden sailboat to life. So, grab your tools and let’s set sail on this exhilarating construction journey !

Creating the Deck Framework

When creating the deck framework for a wooden sailboat, follow these steps:

• Measure and mark the desired deck size and shape on the boat’s frame.
• Cut and shape the wooden planks or panels to match the marked measurements.
• Align the planks or panels horizontally across the frame, ensuring they are straight and evenly spaced.
• Secure the planks or panels to the frame using screws or nails, ensuring tight fastening.
• Add additional support beams or joists underneath the deck for added strength and stability.
• Sand the deck surface to create a smooth and even finish.
• Apply a weather-resistant sealant or paint to protect the deck from moisture and UV damage.
• Install necessary features or fixtures on the deck, such as hatches, cleats or railings.

Pro-tip: Enhance the deck’s strength and durability by adding epoxy or marine adhesive between the joints before securing the planks or panels.

Installing the Cabin and Interior Features

When building a wooden sailboat, it is important to pay attention to every step, including the installation of the cabin and interior features. To install these features, follow the following steps:

1. First, measure and cut the materials for the cabin walls, floor, and ceiling.

2. Next, securely fit the cabin walls in place.

3. Then, attach the floorboards to the cabin base using screws or nails.

4. Align and install the cabin ceiling.

5. If desired, add insulation for extra comfort.

6. Attach interior features such as cabinets, storage compartments, and seating areas.

7. Install windows and hatches to allow for natural light and ventilation.

8. Properly wire the cabin for electricity, ensuring that lights and outlets are installed and functioning.

9. Finish the interior by sanding and applying a protective coat of varnish or paint.

10. Ensure that all installations meet safety standards.

Precision and attention to detail are key when installing the cabin and interior features of a wooden sailboat. By carefully measuring, cutting, and fitting each component, you can ensure a secure fit. It is important to optimize the layout and functionality of the interior features to create a comfortable living space with ample storage. The addition of windows and hatches will enhance comfort and enjoyment by providing natural light and ventilation . If electricity is needed, proper wiring is essential to ensure necessary lighting and power outlets. Finishing the interior with a protective coat of varnish or paint will not only enhance aesthetics but also provide durability.

Remember, the goal is to create a cozy retreat for sailors, so it is important to put in the necessary effort to install the cabin and interior features correctly.

Installing the Sails and Rigging

Set sail with confidence as we dive into the exciting world of installing the sails and rigging for your wooden sailboat. Discover the key considerations in choosing the perfect sails and master the art of setting up and adjusting the rigging. With expert tips and tricks , this section will equip you with the knowledge to navigate the waters with ease and experience the thrill of sailing your wooden masterpiece .

Choosing the Right Sails

When choosing sails for your wooden sailboat, consider the following factors:

– Type of sailing: Determine if you plan to cruise , race , or do both. Different sails are designed for specific purposes.

– Boat size: The size of your sailboat determines the size and number of sails you need. Larger boats require bigger sails , while smaller boats may need fewer and smaller sails .

– Wind conditions: Consider the typical wind conditions in your sailing areas. Different sails perform better in light winds , heavy winds , or various wind conditions.

– Sail material: The material of the sails affects durability and performance. Material choices include Dacron , laminate , and nylon . Each material has different trade-offs between longevity, performance, and cost.

– Reefing options: If you sail in varied or unpredictable wind conditions, choose sails with reefing options. Reefing allows you to adjust the sail area for stronger winds, improving control and safety.

– Manufacturer reputation: Research sail manufacturers for their reputation and reliability. Read reviews, seek recommendations, and consider warranty and customer support.

By considering these factors, you can make an informed decision when choosing sails for your wooden sailboat. Remember, the right sails greatly impact your sailing experience, so take your time and choose wisely.

Setting Up and Adjusting the Rigging

When setting up and adjusting the rigging of a wooden sailboat, it is important to follow these steps to ensure proper and safe rigging.

To start, attach the mast to the deck using a mast step or mast partner for stability and support. This will provide the foundation for the rigging.

Next, secure the standing rigging , which includes the shrouds and stays , to the mast. This will help distribute the forces from the sails and ensure the stability of the mast.

Connect the forestay to the bow of the sailboat. This will keep the mast in line and control the position of the headsail.

To counteract forces from the headsail and maintain rigging tension, attach the backstay to the stern of the boat.

Use turnbuckles or rigging screws to adjust the tension in the standing rigging. This will ensure proper alignment and support of the mast.

Install the running rigging , including halyards and sheets , to control the position and tension of the sails.

Before and during sailing, it is important to regularly check the tension in the rigging to ensure performance and safety.

Make any necessary adjustments to the rigging during sailing in order to optimize the shape of the sails and enhance the performance of the boat.

By following these steps, you will be able to properly set up and adjust the rigging of your wooden sailboat, allowing for safe and enjoyable sailing experiences.

Finishing Touches and Maintenance

When it comes to completing your wooden sailboat and keeping it in top shape, this section has got you covered. We’ll dive into the art of applying exquisite finishes to the hull and deck, giving your sailboat a stunning appearance. And don’t worry, we won’t neglect the nitty-gritty details of regular maintenance and care, ensuring your wooden vessel remains seaworthy for years to come. So, let’s get ready to add those finishing touches and keep your sailboat sailing smoothly !

Applying Finishes to the Hull and Deck

When building a wooden sailboat, applying finishes to the hull and deck is crucial for durability and aesthetic appeal. Here are the steps to follow:

1. Prepare the surfaces: Sand down rough spots, fill in cracks and imperfections, and ensure a smooth and clean surface.

2. Choose the right finish: Consider the type of wood and desired look. Varnish provides a glossy and traditional appearance, while paint offers different colors and styles.

3. Apply the primer: Enhance adherence and create an even surface for the final coat by applying a primer.

4. Apply the finish: Use a brush or roller to apply the chosen finish coat to the hull and deck. Follow the manufacturer’s instructions for drying times and application techniques.

5. Allow for drying and curing: Follow the manufacturer’s instructions for drying and curing to ensure the finish is fully set and provides maximum protection.

6. Inspect and touch up: After drying, inspect the hull and deck for missed spots or imperfections. Touch up any areas that require additional finish for a seamless and polished look.

By following these steps and applying finishes properly, you can protect and enhance the hull and deck of your wooden sailboat, ensuring it looks beautiful and lasts for many years.

Regular Maintenance and Care for Your Wooden Sailboat

Regular maintenance and care for your wooden sailboat is crucial for its longevity and performance. Here are the steps to follow:

1. Inspect the hull and deck for damage like cracks or rot. Promptly repair any issues to prevent further damage.

2. Clean the boat regularly with mild detergent and freshwater to remove dirt, salt, and grime that can accumulate over time.

3. Apply a protective coating to the hull and deck using marine-grade varnish or paint to prevent water penetration and protect against UV damage.

4. Check the rigging and sails for wear or damage. Replace worn-out lines or rigging components for safe sailing.

5. Inspect wooden components such as the mast, boom, and rudder for rot or decay. Replace or repair as necessary to maintain structural integrity.

6. Keep the interior of the sailboat clean and dry to prevent mold and mildew growth. Use a dehumidifier if needed.

7. Regularly check and maintain the boat’s systems , including electrical, plumbing, and navigation equipment. Address any issues promptly.

8. Store the wooden sailboat in a suitable location, such as a covered boat dock or boatyard, when not in use. Protect it from extreme weather conditions.

Pro-tip: Establish a regular maintenance schedule and keep a detailed record of all maintenance and repairs. This will help you stay organized and ensure your wooden sailboat remains in optimal condition.

Some Facts About How To Build A Wooden Sailboat:

• ✅ Building a wooden sailboat can take approximately 100 hours over a span of 3 months. (Source: Instructables)
• ✅ A wooden sailboat can cost around $1,000 to build. (Source: Instructables)
• ✅ The boat is typically built from 4×8 sheets of plywood and measures 8 feet in length. (Source: Instructables)
• ✅ Various tools such as a pull-saw, table saw, router, sander, and drill are needed for building a wooden sailboat. (Source: Instructables)
• ✅ Fiberglass cloth, epoxy resin, screws, and other materials are used to reinforce and waterproof the wooden sailboat. (Source: Instructables)

Frequently Asked Questions

1. how long does it take to build a wooden sailboat.

Building a wooden sailboat typically takes about 100 hours spread over approximately 3 months.

2. What materials are needed to build a wooden sailboat?

To build a wooden sailboat, you will need 4×8 sheets of plywood, epoxy resin, oak plywood, various tools (such as a pull-saw, table saw, router, etc.), fiberglass cloth, screws, fasteners, and other supplies like glue, clamps, and mixing cups.

3. How much does it cost to build a wooden sailboat?

The estimated cost of building a wooden sailboat is around $1,000, including the materials and tools needed for the project.

4. Can I learn to build a wooden sailboat if I have no prior experience?

Yes, building skills can be learned gradually, and mistakes can be avoided along the way. With patience and guidance from boat building plans, even beginners can successfully build a wooden sailboat.

5. How long is the wooden sailboat described in the reference?

The wooden sailboat described in the reference is an 8-foot long pram, featuring classic lines and made from 4×8 sheets of plywood.

6. Can I launch the wooden sailboat in any body of water?

Yes, the wooden sailboat is designed to be light enough to fit in a small pickup truck or be rolled to a local lake on a dolly, making it suitable for various bodies of water.

About the author

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Latest posts

The history of sailing – from ancient times to modern adventures

History of Sailing Sailing is a time-honored tradition that has evolved over millennia, from its humble beginnings as a means of transportation to a beloved modern-day recreational activity. The history of sailing is a fascinating journey that spans cultures and centuries, rich in innovation and adventure. In this article, we’ll explore the remarkable evolution of…

Sailing Solo: Adventures and Challenges of Single-Handed Sailing

Solo Sailing Sailing has always been a pursuit of freedom, adventure, and self-discovery. While sailing with a crew is a fantastic experience, there’s a unique allure to sailing solo – just you, the wind, and the open sea. Single-handed sailing, as it’s often called, is a journey of self-reliance, resilience, and the ultimate test of…

Sustainable Sailing: Eco-Friendly Practices on the boat

Eco Friendly Sailing Sailing is an exhilarating and timeless way to explore the beauty of the open water, but it’s important to remember that our oceans and environment need our protection. Sustainable sailing, which involves eco-friendly practices and mindful decision-making, allows sailors to enjoy their adventures while minimizing their impact on the environment. In this…

Posted 2024-03-22 11:28

Contact Information:

17 ft wooden sailboat - $900 (petaluma)

QR Code Link to This Post

post id: 7729789353

posted: 2024-03-22 11:28

updated: 2024-03-26 23:42

♥ best of [ ? ]

refresh the page.

17 ft wooden sailboat - boats - by owner - marine sale - craigslist

17 ft wooden sailboat. Needs some sanding but still fun to take out. It has a slow leak like most boats, I still take it out on the Petaluma river and bodega bay and the amount of water in the...

• Sign In or Register
• Boats for Sale
• Research Boats
• Sell a Boat
• Search Alerts
• My Listings
• Account Settings
• Dealer Advertising
• 17 Ft Sailboat

17 Ft Sailboat Boats for sale

17 ft. Boat by Hobie Cat. Sailboat

Merrillville, Indiana

Posted Over 1 Month

Hobie cat. Sailboat. 17ft. Long No title avl. As is. Must Go. Yes it is on a trailer to hitch to truck.

Offshore Sailboat

Toronto, Ontario

Make Murray 33

Category Sailboats

Length 33.0

33 ft Ted Brewer designed cruising Cat-Ketch (Steel Hull) with 2 unstayed 50ft carbon fiber masts, fully battened sails. Professionally finished, 28 HP Volvo diesel, isolation transformer, 1500 Watt inverter, 30A battery charger, high output (120A) alternator with 3 stage regulator, Propane stove w. Oven, Propane sniffer, 2 external 20lb Propane tanks, Microwave, 12V fridge/freezer, Lavac head, VHF, Stereo w. 10CD changer, GPS, Autohelm, Raymarine A57D Depthfinder/GPS/Chartplotter with all Canadian Charts, Radar, 200W solar panels, Watermaker, 1 fresh & 1 saltwater pressure pump, 1 electric & 1 manual bilge pump, macerator pump for pumpout, bilge alarm, 3 solar vents (24 hr. type) SS Davits, SS Bow & Stern pulpits, SS bow roller, SS Stanchions & lifelines, 2 aluminum boom vangs, 3 Anchors(Delta, Bruce, Danforth), Parachute anchor, Muir “Cheetah” electric windlass, Pedestal Steering, Laptop hookup to GPS, 17” remote LCD colour display in cockpit, 2 self tailing Anderson F405T winches, Hard (Fiberglass) Dodger, Sunbrella Bimini, cockpit cushions, complete cockpit enclosure, Leecloths, SS Boarding Ladder. Commissioned in 1998. Sailed in Lake Ontario only. Loc’n: Lake Ontario, Whitby, ON Specs: LOA 33ft, Beam 10Ft 11in, LWL 27ft Depth 5ft10”, Displ. 15 000 lbs, Ballast 5200 lbs, Headroom 72.5” V-berth: LxW 74”x63.5” Q-Berth: 77” Stbd Berth:78.25” Port Berth (Double- drop table): 72” Cockpit: 6 ft Registration # : 822460 This is a custom built vessel (Cost $200 000+) and has been well maintained. With modern epoxy paints, a well maintained steel hull will easily last 100 years or more. The boat has only been sailed in Lake Ontario. No salt water exposure. One owner, excellent condition, will assist with delivery (help to sail her to her new home to assist new owner with getting to know boat and equipment, if so desired, or arrange for trucking). Have enjoyed sailing this boat safely and comfortably since 1998 and would sail her anywhere with complete confidence.

1977 Helms 24' Sailboat

Dawsonville, Georgia

Model 24' Sailboat

4200 lbs./ 1905 kgs. / 839 kgs. Helms Co. type: Lead First Built: 1977 Last Built: # Built: 750 RIG DIMENSIONS KEY I(IG): 30.50' / 9.30m J: 10.50' / 3.20m P: 25.50' / 7.77m E: 9.00' / 2.74m PY: EY: SPL/TPS: ISP: SA(Fore.): 160.13 ft2 / 14.88 m2 SA(Main): 114.75 ft2 / 10.66 m2 Total(calc.)SA: 274.88 ft2 / 25.54 m2 DL ratio: 207.46 SA/Disp: 16.94 Est. SA/Disp.: 16.95 Bal./Disp.: 44.04% Disp./Len.: 207.46 Designer: Stuart Windley Builder: Jack A. (USA) Construct.: FG Bal. Ballast: 1850 lbs. Helms Co. Forestay Len.: 32.26' / 9.83m BUILDERS (past & present) More about & boats built by: Helms - Jack A. DESIGNER More about & boats designed by: Stuart Windley Sailboats Cruiser 3441 PSN . 1977 Helms 24' Sailboat Nice Sailboat Hull Type: Fin w/transom hung rudder Rig Type: Masthead Sloop LOA: 23.92' / 7.29m LWL: 20.83' / 6.35m Beam: 8.83' / 2.69m Listed SA: 275 ft2 / 25.55 m2 Draft (max.) 4.17' / 1.27m Draft (min.) Disp...

24 ft Sailboat CAL T/4

Ewa Beach, Hawaii

24’ CAL T/4 Sailboat, production # 47.  This sailboat was completely refurbished in 2010 with new rigging, mast stepped, (inspected and painted), all new chain plates, deck hardware, stainless steel bolts throughout, new life lines, gunnel, running lights, hull & deck paint, new electrical, telescoping motor mount, new interior paint, wood restoration.  Equipment: Main Sail (good condition), Standard Jib (good condition), Genoa 150% (good condition), Spinnaker (good condition), outboard motor (Tohatsu 9.8 HP 2 Cycle), VHF Standard Horizon Eclipse DSC Marine Transceiver, 2012 Shakespeare Antenna & Coax Cable, standard horizon HX 280S VFH FM Marine Transceiver, Cruiser 970 Series portable toilet (extra tall), compass, stainless steel ladder, wooden oar, West Marine inflatable 2 man dinghies – new w/foot pumps, 2 oars each with oar locks, life jackets (6), flotation cushion, Tailor Made boat bumpers (6), hook pole, extendable, 12 v marine battery, anchors (2), emergency light, flares – handheld, air horn, Fire Extinguisher, bilge pumps (2), (hand operated). Hull Type: Fin Keel Rig Type: Masthead Sloop LOA: 24.17 LWL: 21.00 Beam: 8.00 Draft (max) 4.00 Draft (min) SA: 256 Displacement: 4000 Ballast: 2000 Designer: C. William Lapworth Builder: Jensen Marine (USA) Hull: Fiber Glass Bal. Type: Lead Weighted Keel Hull Number: 47

17 ft. Gaff Haven 12 1/2 Sailboat. Centerboard version of the Herreshoff 12 1/2

Grosse Pointe, Michigan

Make Custom Built

Length 17.0

The Haven 12 1/2 is Joel White's centerboard version of the Herresshoff 12 1/2. This boat was built to the highest standards, completed in 2006. It has a white oak keel and steam bent oak frames. It was built with plank on frame construction over molds at each frame with Atlantic White Cedar. The front deck is 3/8" marine plywood with teak marine grade plywood laminated on top and scribed with lines to represent deck planking. The rest of the wood is all mahogany and teak. The gaff rigged sails (main and jib), are from Center Harbor (Maine) sail makers. The metal hardware is all silicone bronze as are all the screws. All the spars are Sitka Spruce, which is very light weight and very strong. She has Sunbrella main and jib sail covers. There is a marine grade deep discharge 12 volt battery which powers Minn-Kota electric trolling motors for auxiliary power. There is also an AM/FM/Marine stereo system with iphone/ipod input and two mounted speakers. A galvanized wire lifting harness is also included. It comes with a custom built galvanized Triad trailer (~2006), which has a custom mast holder and "sail off" capability. New paint and varnish was completed inside and out in April, 2015 using Epifanes Varnish and George Kirby Jr. paint. The boat is located near Detroit, Michigan - worth the trip! $20,000. Reasonable offers considered. Shipping and payment: Cannot deliver boat. Payment required in full at time of purchase.

1984 Renkin Tangerine Sailboat

Sterling, Colorado

Model Tangerine

Category Daysailer Sailboats

Length 18.0

The Renkin 18 was a hugely popular sailboat. It is a shallow keel making it easy to maneuver on smaller lakes etc. This boat was also made with an orange hull and was called a Tangerine. If you are familiar with the Tangerine this is probably the nicest one you'll find available! Why? Because this boat has been in storage in a dry garage since 1994 with the sails were tucked away in a nylon sail bag. When we pulled it out of storage this year the only issue was the tires on the trailer. We bought brand new tires and rims and its ready to go.For me the look and feel of the tiller is something important. I've included a picture for all you skippers. We also have a custom made boat cover. It was torn in a storm but could be used as a pattern or possibly repaired.Technical InformationBoat name: Renken 18 Sailboat (R18)LOA: 17'6"LWL: 15'3"Draft: 24"Beam: 6'4"Keel: fixed shoalDisplacement: 1220 lbsBallast: 450 lbsSleeps: 2 adults, 2 childrenSail area: main = 91 sq ft, jib = 59 sq ft, (total = 150 sq ft)Portsmouth # (for regattas): 112.4

2006 vanguard nomad sailboat

Warren, Pennsylvania

Make Vanguard

Model Nomad

2006 17ft vanguard nomad sailboat. new Dacron main with 2 reef points, jiffy reefing on main, torqeedo electric outboard, epoxy barrier coat on bottom to prevent blistering (per manufacturers recommendation). accessories; cover for storage in the water or on the hard with mast up, boarding ladder, bilge pump, paddle, flare kit. A very versatile boat; with its extendable bowsprit & spinnaker a high performance boat for the experienced sailor, or with its roller furling jib, and 2 reef points on the jiffy reefing main a docile boat for the beginner or family sailing

1998 MURRAY 33 SAILBOAT

Omaha, Nebraska

1998 Murray 33. 33 ft Ted Brewer designed cruising Cat Ketch Steel Hull with 2 unstayed 50ft carbon fiber masts, fully battened sails. Professionally finished, 28 HP Volvo diesel, isolation transformer, 1500 Watt inverter, 30A battery charger, high output 120A alternator with 3 stage regulator, Propane stove w. Oven, Propane sniffer, 2 external 20lb Propane tanks, Microwave, 12V fridge freezer, Lavac head, VHF, Stereo w. 10CD changer, GPS, Autohelm, Raymarine A57D Depthfinder GPS Chartplotter with all Canadian Charts, Radar, 200W solar panels, Watermaker, 1 fresh and 1 saltwater pressure pump, 1 electric and 1 manual bilge pump, macerator pump for pumpout, bilge alarm, 3 solar vents 24 hr. type SS Davits, SS Bow & Stern pulpits, SS bow roller, SS Stanchions and lifelines, 2 aluminum boom vangs, 3 Anchors Delta, Bruce, Danforth , Parachute anchor, Muir Cheetah electric windlass, Pedestal Steering, Laptop hookup to GPS, 17in remote LCD colour display in cockpit, 2 self tailing Anderson F405T winches, Hard Fiberglass Dodger, Sunbrella Bimini, cockpit cushions, complete cockpit enclosure, Leecloths, SS Boarding Ladder. Commissioned in 1998. Sailed in Lake Ontario only. Loc’n: Lake Ontario, Whitby, ON

1979 Hunter 27 Sailboat

Allentown, Pennsylvania

Sailboat is currently in the water and can be inspected by appointmentHauling and delivery available On Deck Bimini Canopy3 winches with handlesWinch/steering wheel coversIlluminated compassAnchor with 150 chain/rodeGas grilleMain sail coverShore power connector complete with # 10 power cord (30 amp)Solar panel Fold up swim ladderCushions for cockpit seatingElectrical: Illuminated control panel with fuseStandard Horizon gpsApelco depth/temp/fish finderBattery selector switch2 batteries (deep cycle)\Solar chargerNavigation lighting, anchor lightBilge pump with alarm indicatorInterior lightingVhf radioSound system with 4speakers350 watt ac 120 volt inverter Life Safety Equipment: Fire extinguishersFlare gunFlares4 lifevests Galley: 2 burner Origo 4000 Alcohol stove with sink, pressueized water,faucet and 12 volt DC refrigerator/freezer . Saloon: Saloon is floor is dry and in good condition with clean cushions and matching curtains.Storage port and starboard sides with 2 cabinets and folding table Electric head complete with holding tank , deck mounted pump-out fitting and new seacocks.Sink with pressurized water faucet adjacent to headRigging/Sails: Both the standing and running rigging are in good working condition as well as the sails 1 135% Genoa complete with roller furler and 1 full main sail with reef adjustments Engine Specifications: Yanmar diesel 2 cylinder 2GM20 with 387 hoursengines starts as it should and runs wellDripless shaft seal3 bladed propellerSpare filtersHull Type: Fin with rudder on skegRig Type: Masthead SloopLOA: 27.17' / 8.28mLWL: 22.00' / 6.71mBeam: 9.25' / 2.82mListed SA: 343 ft2 / 31.86 m2Draft (max.) 4.25' / 1.30mDraft (min.) Disp. 7000 lbs./ 3175 kgs.Ballast: 3000 lbs. / 1361 kgs.SA/Disp.: 15.04Bal./Disp.: 42.87%Disp./Len.: 293.48Designer: John CherubiniBuilder: Hunter Marine (USA)Construct.: FGBal. type: First Built: 1974Last Built: 1984# Built: 2000AUXILIARY POWER (orig. equip.)Make: RenaultModel: Type: DieselHP: 8TANKSWater: 35 gals. / 132 ltrs.Fuel: 12 gals. / 45 ltrs.RIG DIMENSIONS KEYI: 34.50' / 10.52mJ: 11.50' / 3.51mP: 29.00' / 8.84mE: 10.00' / 3.05mPY: EY: SPL: ISP: SA(Fore.): 198.38 ft2 / 18.43 m2SA(Main): 145.00 ft2 / 13.47 m2Total(calc.)SA: 343.38 ft2 / 31.90 m2DL ratio: 293.48SA/Disp: 15.06Est. Forestay Len.: 36.37' / 11.08mBUILDERS (past & present)More about & boats built by: Hunter Marine (USA)DESIGNER

ENDEAVOUR 33 SAILBOAT 1984

Rome, New York

Classic, fast shoal draft cruiser with rich teak interior, AC and heat, and lots of extras. Spacious salon. If you are in the market for your first family sailboat or looking for a vessel to explore the coastal US, then you need to see this sturdy 1984 Endeavour sailboat. Traditional layout, comfortable and ready to explore. Good setup for the solo sailor. She would also make a very nice live aboard! Current yard rent paid until October 2014. Family illness forces sale. SPECIFICATIONS LOA: 32' 7" LWL: 27' 6" Beam: 11' 6" Draft: 4' 6" Displ.: 11,350 lbs. Ballast: 4,600 lbs. enclosed lead Mast Height above DWL: 48' 9" Rigging: Masthead Sloop Sail Area: 539.5 sq. ft. Main Sail Area: 228.15 sq. ft. Fore Sail Area: (100%) 310.5 sq. ft. SA/D: 17.09 B/D: 40.50 % D/L: 244 Hull Speed: 7.3 knots PHRF - Northeast: 156 Designer: Bruce Kelley Fuel Capacity: 36 gallons Fresh Water Capacity: Approx. 56 gallons Holding Tank: 12.5 gallonsACCOMMODATIONS Spacious Saloon with beautiful solid teak doors and cabinetry throughout. Traditional layout in good condition. V-Berth forward. Salon features L-shaped port settee (converts to double) with a fold away table and starboard bench settee. Single quarter berth & navigation table to port. Galley to starboard. · Nav. Station: Flip Top chart table at forward edge of Quarter berth, three drawers, Rolled chart storage · Head: Located aft of the master to port with vanity, holding tank, head, sun shower, bulkhead mirror, three lockers, drawer, fiddled shelf storage and screened port · Teak bulkhead mounted table with hinged extension and bookshelf/cabinet behind. · Blue upholstered settees/berths in good shape · Generous lighting throughout. TV/FM coaxial cable wiring at shelf over hanging locker · Berths: 6 · Headroom: 6' 2" ENGINE & MECHANICAL · Yanmar 3GM30F Diesel, fresh water cooled, professionally and regularly maintained. · Engine hours: 1,625. · Racor fuel filter · Dripless stuffing box · 3-blade bronze prop, serviced · 36 gallon, welded aluminum fuel oil tank HULL & DECK · Solid KlegeCell foam core decks (no balsa to rot), no soft spots anywhere. No hull blisters. · Skeg mounted rudder for directional stability and strength · Anchor roller at bow · Bruce anchor w/ chain, 200’ 5/8” rode in deep bow locker, excellent condition · Secondary Danforth anchor with chain & rode · Teak hand rails · Anodized aluminum toe rails · Propane deck locker, stbd., with aluminum tank, manual & electric shut-off · West Marine propane kettle grill and canvas cover-like new · Outboard motor mount · Custom foam cockpit cushions · S/S swim ladder · Boarding gates P & S · Fenders & dock lines · Cockpit Speakers · Companionway teak boards, refinished, stow in stbd. lazarette storage pockets. · Companionway swing doors, removable (need repair HELM · Edson pedestal w/38" SS destroyer wheel with 2 instrument pods · 5” Danforth compass in SS hood · Teak folding cockpit table · Removable Edson teak drink caddy SAFETY · Type III PFD's · LifeSling · CO Monitor · Fire Extinguishers · Flare kit · 12V Bilge Pump · Manual bilge pump · First Aid Kit SALON · Spacious interior layout with large fold-out table (shelves behind) · Abundant drawer and locker storage throughout. · 10 opening ports & two large overhead hatches · Teak & holly sole in good condition · Several 12v lighting fixtures · 12 volt fan · 1 Wood framed companionway screen · 1 Wood framed hatch screen GALLEY · SS Galley Maid propane stove and oven · Large icebox with shelves · Adler Barbour 12V refrigeration · SS Sink with H/C pressure water · Microwave oven · Flo-Jet 12 Volt electric water pump, demand type with an accumulator tank. · Whale foot operated water pump in the galley (needs mounting). · Beautiful solid teak stove-top/cutting board with green Silestone insert, with storage slot · Built-in plate and utensil storage · Wine glass rack · Cookware and tableware V-BERTH · V-berth 6'6" · 12 V fan & Solar powered vent fan in hatch · 1 Wood framed Hatch screen · 2 drawers, 2 side shelves & cabinet HEAD · Enclosed head with shower & sump pump · SS sink with hot & cold pressure water · Teak cabinets and storage · Holding tank monitor · Holding Tank: 12.5 gallons with Y-valve and pump-out ELECTRONICS · Autohelm with hand-held remote · West Marine VHF580 Radio · Depth Sounder · Knot meter · Aiwa 40 watt Stereo FM/AM/Aux input with 2 interior KLH speakers and 2 cockpit speakers · Mast-mounted TV-FM antenna · Mast-top VHF antenna ELECTRICAL · 12,000 BTU CruisAir Air conditioning / heating · Breaker Panel: 12 volt DC; 110 volt AC · 4 Batteries (2-12V, 2-6V) · Battery isolator · Xantrex 40Watt multistage battery charger · 110 volt 30A Ship-to-shore cable - 50 ft. · Seaward SS water heater, 6 gallon, 115 VAC/ heat exchanger. · 2 Mast-mounted P&S deck lights · Chart table gooseneck light - red · Brinkman Q-Beam 12V Spotlight, 400,000 CP CANVAS · Two-part full-deck awning/sun-shade (a $1,400 item) · Bimini on SS frame · Helm cover · Sail Cover · Winch covers · SS dodger frame-no canvas STANDING RIGGING · Hood roller furling on head stay · SS wire standing rigging & chain plates · Four (4) each port & stbd. shrouds · Keel-stepped aluminum spar-Exc. Cond. RUNNING RIGGING · Two (2) Lewmar No. 43 two speed self-tailing primary winches w/covers. · Two (2) Lewmar No. 8 single speed mast mount halyard winches. · 2 winch handles · Harken 4:1 ball-bearing mid-boom mainsheet traveler, cabin mounted · Hardware in place / sail cover designed for lazy-jack system. Needs lines. · Genoa tracks with twin-sheet Schaeffer blocks, port and stbd. · Dacron braid sheets · Dacron braid halyards, internal & external, outhaul & topping lift · Aft turning (cheek) blocks port & stbd. SAILS · Footless main sail - new and unused · Original main sail · Genoa head sail - roller furling with UV stripe FRESH WATER TANKS · Polypropylene tank mounted below the stbd. settee, 36 gallons · Polypropylene tank located under port side aft quarter berth, est. 20 gallons, w/ separate deck fillSPARES / EXTRAS / OTHER · Includes 5 Hostar stackable jack stands for off-season layup ($1,000 value) · 4 – 10”x10”x2’ Hickory staging blocks · New Beckson port screens · Tool set in drawer · Hatch WindScoop for ventilation · Stern flagstaff & flag · All manuals, incl. Yanmar · 115VAC Vacuum cleaner · New extra odor-resistant hose for sanitary plumbing · Deck brush, cabin brush and dust pan · Boat hook · Custom compact winter cover scaffolding-ready for tarp (shown in photos) · V-belts, engine hoses, hardware, etc. RECENT UPGRADES INCLUDE · Brand new main sail - never used · Epoxy hull re-faring · Cushions covers removed, cleaned & repaired · Compass serviced · Holding tank seal maintenance, cleanout and sanitizing · New shaft zinc · Bottom paint (9/2014) · Hull polish & wax (9/2014) Work Needed: Woodwork around forward port lights in main salon needs to be repaired/replaced. Bright work: hand rails, cockpit table and taffrailNew price reflects work needed on rudder. Recent repair did not work to seal it and there is water inside. SS rudder post is good and rudder seems solid, is probably serviceable but may ultimately need better repair or replacement. Price: US $ 19,500Located in Rome, NY on the Erie Canal (accessible to Lake Champlain, the Atlantic Ocean or the Great Lakes). This vessel is sold AS IS, WHERE IS.Not included / Negotiable: 8.5' Zodiac/West Marine dinghy, RU260, with oars, pump, bag, repair kit, plus 3.3 hp Mercury outboard - excellent. $950New-in-box Lewmar 1000 Pro-Series 12V Windlass, Stainless Steel. $700Pair (2) of new Lewmar Ocean Series 16CST Self-Tailing Winches, Chromed Bronze. $950 Call: 315-733-7305 (H) Text: 315-368-4939 (C) Email: [email protected] Endeavour 33: http://www.endeavourowners.com/boats/e33/e33brochure.pdf http://sailboatdata.com/viewrecord.asp?class_id=1878 http://sailboatdata.com/view_builder.asp?builder_id=27 http://sailboatdata.com/view_designer.asp?designer_id=162 Zodiac/WM RU-260 Inflatable “Roll-Up” Dinghy: https://www.youtube.com/watch?v=Z0FSSffq5zM http://www.inriodulce.com/lostandfound/RU260.html Mercury 3.3 hp Outboard: https://www.youtube.com/watch?v=MLY-tuSCkK4 http://www.mercury-marine.eu/mercury/en/Products/Products.aspx?Model=TwoStroke%203.3 Lewmar Winch 16CST: http://lewmar.com/products.asp?id=8150&lid=25361

Classic, fast shoal draft cruiser with rich teak interior, AC and heat, and lots of extras. Spacious salon. If you are in the market for your first family sailboat or looking for a vessel to explore the coastal US, then you need to see this sturdy 1984 Endeavour sailboat. Traditional layout, comfortable and ready to explore. Good setup for the solo sailor. She would also make a very nice live aboard! Current yard rent paid until October 2014. Family illness forces sale. SPECIFICATIONS LOA: 32' 7" LWL: 27' 6" Beam: 11' 6" Draft: 4' 6" Displ.: 11,350 lbs. Ballast: 4,600 lbs. enclosed lead Mast Height above DWL: 48' 9" Rigging: Masthead Sloop Sail Area: 539.5 sq. ft. Main Sail Area: 228.15 sq. ft. Fore Sail Area: (100%) 310.5 sq. ft. SA/D: 17.09 B/D: 40.50 % D/L: 244 Hull Speed: 7.3 knots PHRF - Northeast: 156 Designer: Bruce Kelley Fuel Capacity: 36 gallons Fresh Water Capacity: Approx. 56 gallons Holding Tank: 12.5 gallonsACCOMMODATIONS Spacious Saloon with beautiful solid teak doors and cabinetry throughout. Traditional layout in good condition. V-Berth forward. Salon features L-shaped port settee (converts to double) with a fold away table and starboard bench settee. Single quarter berth & navigation table to port. Galley to starboard. · Nav. Station: Flip Top chart table at forward edge of Quarter berth, three drawers, Rolled chart storage · Head: Located aft of the master to port with vanity, holding tank, head, sun shower, bulkhead mirror, three lockers, drawer, fiddled shelf storage and screened port · Teak bulkhead mounted table with hinged extension and bookshelf/cabinet behind. · Blue upholstered settees/berths in good shape · Generous lighting throughout. TV/FM coaxial cable wiring at shelf over hanging locker · Berths: 6 · Headroom: 6' 2" ENGINE & MECHANICAL · Yanmar 3GM30F Diesel, fresh water cooled, professionally and regularly maintained. · Engine hours: 1,625. · Racor fuel filter · Dripless stuffing box · 3-blade bronze prop, serviced · 36 gallon, welded aluminum fuel oil tank HULL & DECK · Solid KlegeCell foam core decks (no balsa to rot), no soft spots anywhere. No hull blisters. · Skeg mounted rudder for directional stability and strength · Anchor roller at bow · Bruce anchor w/ chain, 200’ 5/8” rode in deep bow locker, excellent condition · Secondary Danforth anchor with chain & rode · Teak hand rails · Anodized aluminum toe rails · Propane deck locker, stbd., with aluminum tank, manual & electric shut-off · West Marine propane kettle grill and canvas cover-like new · Outboard motor mount · Custom foam cockpit cushions · S/S swim ladder · Boarding gates P & S · Fenders & dock lines · Cockpit Speakers · Companionway teak boards, refinished, stow in stbd. lazarette storage pockets. · Companionway swing doors, removable (need repair HELM · Edson pedestal w/38" SS destroyer wheel with 2 instrument pods · 5” Danforth compass in SS hood · Teak folding cockpit table · Removable Edson teak drink caddy SAFETY · Type III PFD's · LifeSling · CO Monitor · Fire Extinguishers · Flare kit · 12V Bilge Pump · Manual bilge pump · First Aid Kit SALON · Spacious interior layout with large fold-out table (shelves behind) · Abundant drawer and locker storage throughout. · 10 opening ports & two large overhead hatches · Teak & holly sole in good condition · Several 12v lighting fixtures · 12 volt fan · 1 Wood framed companionway screen · 1 Wood framed hatch screen GALLEY · SS Galley Maid propane stove and oven · Large icebox with shelves · Adler Barbour 12V refrigeration · SS Sink with H/C pressure water · Microwave oven · Flo-Jet 12 Volt electric water pump, demand type with an accumulator tank. · Whale foot operated water pump in the galley (needs mounting). · Beautiful solid teak stove-top/cutting board with green Silestone insert, with storage slot · Built-in plate and utensil storage · Wine glass rack · Cookware and tableware V-BERTH · V-berth 6'6" · 12 V fan & Solar powered vent fan in hatch · 1 Wood framed Hatch screen · 2 drawers, 2 side shelves & cabinet HEAD · Enclosed head with shower & sump pump · SS sink with hot & cold pressure water · Teak cabinets and storage · Holding tank monitor · Holding Tank: 12.5 gallons with Y-valve and pump-out ELECTRONICS · Autohelm with hand-held remote · West Marine VHF580 Radio · Depth Sounder · Knot meter · Aiwa 40 watt Stereo FM/AM/Aux input with 2 interior KLH speakers and 2 cockpit speakers · Mast-mounted TV-FM antenna · Mast-top VHF antenna ELECTRICAL · 12,000 BTU CruisAir Air conditioning / heating · Breaker Panel: 12 volt DC; 110 volt AC · 4 Batteries (2-12V, 2-6V) · Battery isolator · Xantrex 40Watt multistage battery charger · 110 volt 30A Ship-to-shore cable - 50 ft. · Seaward SS water heater, 6 gallon, 115 VAC/ heat exchanger. · 2 Mast-mounted P&S deck lights · Chart table gooseneck light - red · Brinkman Q-Beam 12V Spotlight, 400,000 CP CANVAS · Two-part full-deck awning/sun-shade (a $1,400 item) · Bimini on SS frame · Helm cover · Sail Cover · Winch covers · SS dodger frame-no canvas STANDING RIGGING · Hood roller furling on head stay · SS wire standing rigging & chain plates · Four (4) each port & stbd. shrouds · Keel-stepped aluminum spar-Exc. Cond. RUNNING RIGGING · Two (2) Lewmar No. 43 two speed self-tailing primary winches w/covers. · Two (2) Lewmar No. 8 single speed mast mount halyard winches. · 2 winch handles · Harken 4:1 ball-bearing mid-boom mainsheet traveler, cabin mounted · Hardware in place / sail cover designed for lazy-jack system. Needs lines. · Genoa tracks with twin-sheet Schaeffer blocks, port and stbd. · Dacron braid sheets · Dacron braid halyards, internal & external, outhaul & topping lift · Aft turning (cheek) blocks port & stbd. SAILS · Footless main sail - new and unused · Original main sail · Genoa head sail - roller furling with UV stripe FRESH WATER TANKS · Polypropylene tank mounted below the stbd. settee, 36 gallons · Polypropylene tank located under port side aft quarter berth, est. 20 gallons, w/ separate deck fillSPARES / EXTRAS / OTHER · Includes 5 Hostar stackable jack stands for off-season layup ($1,000 value) · 4 – 10”x10”x2’ Hickory staging blocks · New Beckson port screens · Tool set in drawer · Hatch WindScoop for ventilation · Stern flagstaff & flag · All manuals, incl. Yanmar · 115VAC Vacuum cleaner · New extra odor-resistant hose for sanitary plumbing · Deck brush, cabin brush and dust pan · Boat hook · Custom compact winter cover scaffolding-ready for tarp (shown in photos) · V-belts, engine hoses, hardware, etc. RECENT UPGRADES INCLUDE · Brand new main sail - never used · Epoxy hull re-faring · Cushions covers removed, cleaned & repaired · Compass serviced · Holding tank seal maintenance, cleanout and sanitizing · New shaft zinc · Bottom paint (9/2014) · Hull polish & wax (9/2014) Work Needed: Woodwork around forward port lights in main salon needs to be repaired/replaced. Bright work: hand rails, cockpit table and taffrail.Price: US $ 26,500Located in Rome, NY on the Erie Canal (accessible to Lake Champlain, the Atlantic Ocean or the Great Lakes). This vessel is sold AS IS, WHERE IS.Not included / Negotiable: 8.5' Zodiac/West Marine dinghy, RU260, with oars, pump, bag, repair kit, plus 3.3 hp Mercury outboard - excellent. $1,200New-in-box Lewmar 1000 Pro-Series 12V Windlass, Stainless Steel. $700Pair (2) of new Lewmar Ocean Series 16CST Self-Tailing Winches, Chromed Bronze. $950 Call: 315-733-7305 (H) Text: 315-368-4939 (C) Email: [email protected] Endeavour 33: http://www.endeavourowners.com/boats/e33/e33brochure.pdf http://sailboatdata.com/viewrecord.asp?class_id=1878 http://sailboatdata.com/view_builder.asp?builder_id=27 http://sailboatdata.com/view_designer.asp?designer_id=162 Zodiac/WM RU-260 Inflatable “Roll-Up” Dinghy: https://www.youtube.com/watch?v=Z0FSSffq5zM http://www.inriodulce.com/lostandfound/RU260.html Mercury 3.3 hp Outboard: https://www.youtube.com/watch?v=MLY-tuSCkK4 http://www.mercury-marine.eu/mercury/en/Products/Products.aspx?Model=TwoStroke%203.3 Lewmar Winch 16CST: http://lewmar.com/products.asp?id=8150&lid=25361

Hunter sail boat 17ft

Hastings, Minnesota

Make Hunter

2004 HUNTER 170 is a great day sailboat for beginners and knowledgeable sailors alike. Please email any questions and I will do my best to answer them.

1975 Dart 17 sailboat by sunsail. Tons of extras! price reduction!

Long Beach, California

Make Sunsail

Model Dart 17

1975 Dart 17 sailboat. By sunsail. *Significant price reduction* *There is a crack on the fiberglass around mast base, boat bottom fiberglass is intact. see picture. *This is a great deal: Outboard alone is about $900, Trailer about $850. This is a Trailerable swing keel sailboat with matching Jib and main sails. great outboard gas engine, and matching boat cover plus lots of extras. Will include everything listed below. Light weight, super fast! Been told by several sailboat enthusiast: "this boat Had its own Olympic racing class in the 1970's" as they recognize the "class symbol" on the sails. Ready to hit the water. This boat is in sailing condition. Light weight, easy to trailer on small vehicle. Great first sailboat. Title and registration on both sailboat and trailer is clean and up to date. Trailer is custom made for this sailboat and was purchased in 2012. Also included is a 2012 Mercury 2.5hp gas outboard, extremely low hours. Outboard has all paperwork, manuals, receipt of original purchase etc. Easy to rig and step mast by one person. Also great trolling around without mast and sails. •1975 Dart 17 by Sunsail. •Length: 17' •Beam: 82" •Draft: unknown •Displacement: unknown •Matching sails both in good condition, window on jib. •2012 Great custom made trail rite trailer with tongue jack, mast rest and lock. •600 lb capacity Heavy duty Trailer dolly-makes moving boat & trailer a breeze. •2012 Mercury 2.5hp gas outboard, internal gas tank, super light use. •Swing keel with rigging. •Roller furling head sail. •Kick-up Rudder with tiller. •Matching 17ft. vortex heavy duty and weather resistant, trailerable boat cover with 10 straps and storage bag. •Boom bang rigging- makes sailing and rigging a breeze. •New docking lines. •Uniden Atlantis 250 water proof Hand held VHF marine radio with battery and charger. •Storage container for sails, docking lines, rigging etc. •3 Buoys to protect from impact. •1 manual bilge pump. •Storage compartment for life jackets, buoys, emergency kits, paddles etc. -4 Life jackets; 2 adults and 2 child size. -2 wooden paddles. -2 pairs of sailing gloves -2 magnetic telescoping trailer hitch aligner balls. -2 heavy duty rubber wheel stops. •Antifouling bottom paint in good condition. •2 Emergency kits with flare guns, flares, horn, mirror and other extras. •This boat has never been named, be the first! •Email for questions or more detail pictures. •Will consider any reasonable offers!

Coronado Center Cockpit Sailboat - 40 ft LOA - Great live-aboard

Bainbridge Island, Washington

Make Coronado C35

Great liveaboard sail boat. Many will tell you that it is one of the roomiest boats inside for this size of a boat. Flushdeck design allows approximately 6' headroom throughout, except about 7 ft near the companionway in the main cabin. I've lived aboard for four years, and it was like a mini apartment inside. The center cockpit allows for a nice size stateroom in the back with a full queen size bed (10" thick futon mattress with inner coil springs, is only a year old. I upgraded the anchor to a 70lb CRQ plow, with about 40 ft chain, and then rope. Helps me to sleep well at anchor knowing I won't go anywhere. Also has a smaller dansforth style anchor onboard. Pictures show interior. Rear bed sleeps 2-3 (Queen), front V-birth is roomy and sleeps two just fine, Couch in main cabin folds up into bunks for 2. We have slept 7 aboard very comfortably. 2 more can sleep in the cockpit if you add air mattresses or make cushions to lay on. About the boat: It is older, but in pretty good shape for the age. (Much better than others I looked at when buying). I sail it to the San Juan Islands about once a year for 2 week getaways. I love anchoring out in harbors. Sails are older. Main looks pretty good, but genoa looks older with a small patch that I added last year due to a tear. Probably about due for new one. I have never used the spinnaker, but it is a bright yellow and blue, symmetrical, with 3" pole I bought for $300, and I purchased a sock to use for it. Boat is sloop rigged, but has connections to add a stay, and run it as a cutter rig. I have a stay sail for it, that I believe is Engine was pulled and replaced with an inboard electric by a professional ($4,000) about 5 years ago. it is 36V (6 golf cart batteries). It pushes the boat about 5-6 knots, but at full speed only lasts about an hour. Batteries are 6 years old though, and if replaced with higher volume you might get a lot more. (Or add another bank). It is great for getting in and out of marinas, but for longer trips, I use a 15 horse outboard on the back which is included. I think the impellar went out on it though. I ran it a couple months ago and it wasn't pumping water. I would consider replacing it if I kept it this boat. I have also considered putting a diesel back in for long cruises down to mexico. All plumbing, etc. still seems to be there for a diesel. There is an 8 ft inflatable RIB dinghy that hangs from davits off the back. It has a 6 horse mercury, that is 1-1/2 years old and still under warranty. Great for getting around in bays when at anchor. (I go to the San Juan's a lot). I was going to sell separately, but will include if full price is paid for the boat. Offers below full price won't include the dinghy or smaller outboard. I will sell them separately to recoup some of the difference or keep it for lake fishing. Dodger seems to have been replaced with a frame that is 7" too wide. I had planned on taking a little out of the middle, but please assume that there is no canvas over cockpit. You can have the dodger that I have, but it won't fit as is. Will need to be made smaller. (Material is very good though). Hot water heater was replaced last summer with an 11 gallon stainless (electric) model. Great for multiple showers. I have used it 24 hours after power shut off and still hot. I have a Honda generator that I used to run for the water heater and microwave when at anchor, and to charge the house batteries every couple days. I intend to keep the generator though. I bought it used for under a $1,000 though, so they are easy to come by. Not much in the way of electronics. I have a hand held GPS, hand held (waterproof) VHF, and depth finder up on deck, that are all only a couple of years old. The main VHF is mounted below, but is older, and I never used it, because I was always up above. Refer seems to stop getting cold sometimes and then after I tap on temperature sensors inside, it sometimes starts working again. Haven't figured out if it is a loose wire, or not. There is also a small dorm sized freezer in one of the lockers. It runs off of 110V. Stove is a 2 burner propane unit on gimbals. Has an oven. 2 ea 40 gallon water tanks (80 total). 17 gallon diesel tank in case you put diesel engine back in it. You can buy a used one for a couple thousand. I am currently about 400 miles away, so it is either buy unseen, in which case I will drive there to meet after deposit is made. Or, I will be up in the area the last week of the month to show it if it is not sold yet. Feel free to email to make arrangements to see it. I intend to have it sold this month, even if I have to take less than asking price. Current moorage is $412/mo. It is an awesome small harbor/bay and small marina with great facilities (laundry, rec room available for watching games or entertaining, exercise room, full showers, etc. You can see downtown Seattle skyline from the middle of the harbor. People anchor out there all the time. There is a ferry nearby that goes to downtown Seattle. Or, it is about a 45 minute to 1 hr sail with a 10 knot wind. You can live-aboard if you make arrangements with owner of marina, but he may want a little more money.

Narrow Results

Current search reset all.

• Keyword: 17 ft sailboat
• Catalina (2)
• Vanguard (2)
• Com-Pac (1)
• Coronado C35 (1)
• Custom Built (1)
• HATTERAS (1)
• HERITAGE YACHT CORP (1)
• J Boats (1)
• Macgregor 26S (1)
• Murray 33 (1)
• Ocean Yacht (1)
• Sunsail (1)
• Daysailer Sailboats (7)
• Cruiser Motorcycles (5)
• Sailboats (5)
• Racer Boats (2)
• Motor Yachts (1)
• Florida (8)
• Connecticut (3)
• Michigan (3)
• Pennsylvania (3)
• California (2)
• Colorado (2)
• Indiana (2)
• Minnesota (2)
• New Jersey (2)
• New York (2)
• Rhode Island (2)
• Georgia (1)
• Maryland (1)
• Massachusetts (1)
• Nebraska (1)
• North Carolina (1)
• Ontario (1)
• South Carolina (1)
• Washington (1)
• Wisconsin (1)
• Search Title Only
• Has Picture
• Include Sold Listings

Showcase Ads

1997 Bayliner Ciera express

Raleigh, NC

1986 Mako 254

East Yaphank, NY

2000 Trophy 2002 wa

Olympia, WA

1981 Cobalt Boats Condesa 232

Kansas City, MO

2003 Grady-White Marlin 300

Harrison Twp, MI

2002 Centurion Typhoon

Albuquerque, NM

2004 Malibu Wakesetter Sunscape 21 LSV

Columbia, SC

Create Alert

Please, name this search

Select Interval

Alert Successfully Created