alu yacht for sale

We have received your message and will get back to you shortly.

We will call you back.

Consultation, answering your questions.

Your email:

or your telephone:

Industry leader in

sales and service of boats, ships since 1959.

Aluminum Yachts

Aluminum yachts are light, fast, relatively durable, and convenient in servicing. they don’t corrode or rot from the constant contact with water, they are capable of carrying the necessary load, and they can really serve you for a long period of time. the decision to purchase is entirely up to you..

The price of an aluminum yacht is rarely cheap, if you’re not talking about an old vessel. Very often aluminum is the material of choice for mega-yacht construction and premium class boats. There are models, however, intended for the general consumer. But in this category they are being squeezed out by the plastic fiber yachts, as being cheaper and simpler in construction.

An aluminum hull will undoubtedly cost you more than plastic, but at the same time will be more efficient money-wise, than a wooden or a steel one. The same could be said about the cost of operating and servicing it.

Aluminum Yacht Net Cost.

The cost of building an aluminum hull consists of two factors:

• The price and volume of the aluminum;
• Method of processing.

Aluminum is more expensive than steel and one would naturally assume that would greatly influence the cost of a hull, but that is not the case. The thing is that the aluminum is very soft. It is very easily bent and welded compared to steel. Even a thick sheet of aluminum is very pliable. The processing and hull construction greatly influence price.

The low weight of this metal makes the engineer’s job easier too. They can form almost anything out of it, creating nearly any hull shape they like (within reason), making the yacht practically any size they need.

Performance Features of the Aluminum.

The main advantage that most of the owners can appreciate, even those with no knowledge of chemistry, is aluminum’s ability to withstand corrosion. This is true only in the case when aluminum is used in the open air, above the water. The reason for this is the finest oxide layer that is formed once the metal is exposed to air. That thin layer is what protects the metal from corrosion.

It is also very good at withstanding fresh water. However, it gets more complicated with salt water. For many years, the shipbuilders preferred steel as their material of choice. Everything changed when the chemists came up with a way to raise the corrosion resistance with additives. Today, aluminum yachts are made from alloys of magnesium and silicon (so called alloy 5803). Therefore, when engaging an unknown manufacturer or non-specialized company for building your yacht, you need to ask about the kind of aluminum that is used and its composition. That is the only way to assure that the aluminum will not be affected by corrosion.

The second advantage to aluminum is the weight. Aluminum is obviously lighter than steel, and in some cases, wood. It is the second lightest material after plastic, so it gains speed very easily and is very maneuverable.

Aluminum has one setback – its low durability. Excessive softness of material, which is very advantageous during manufacturing, may become a drawback during use. In cases where a steel yacht is not even dented, an aluminum one can break or tear. On a positive note, most minor collisions result in dents that can easily be repaired.

Refurbishing Value and Maintenance.

There is no need to take your personal aluminum yacht to the specialists every year. The entire routine checkout can be done on your own. Even when section of the paint come off, there’s no big harm done – aluminum is capable of withstanding some exposure to salt water.

Repairing your yacht after some accidents is a little more complicated. If there’s a dent, you can try to flatten it out - the metal is very soft and pliable. If there’s a tear, you will definitely need to go to the professional welders and what is more important, see to it that the patch is made from exactly the same kind of alloy.

Aluminum Yachts for Sale

Atlantic Yacht and Ship, Inc., has aluminum yachts for sale from individual owners and large-scale yacht manufacturers throughout the world. In business since 1959, our stock of aluminum yachts includes Trinity, Admiral, Wider 2016, Sunrise, Heesen, Ocea France 2017, and other new and previously owned aluminum yachts for sale.

Often, one of the reasons for choosing an aluminum yacht over a steel yacht is cost. However, there are many other things to take into consideration before making such a profound purchase; which is why it is important to deal with an experienced yacht broker that can assist you with more than just the sales process.

We are fully licensed yacht brokers with experience in yacht purchases and sales throughout the world and can assist you with everything you need to know about aluminum yachts.

Aluminum Yachts Search

Learn more on the “Aluminum Yachts”

To learn more on the “Aluminum Yachts” or to get advice on how to buy or sell a yacht or get a great price for a yacht charter, please call: +1-954-274-4435 (USA)

Only deal with professionals!

• Boats for Sale

New and used Alubat boats for sale

• United Kingdom
• Alubat Cigale 16
• Alubat Ovni 365
• Alubat Ovni 37
• Alubat Ovni 39
• Alubat Ovni 395
• Alubat Ovni 43
• Alubat Ovni 435
• Alubat Ovni 45
• Alubat Ovni 47
• Alubat Ovni 490

Search for a Alubat on the worlds largest network. We have Alubat brokers and sellers from around the world at great prices.

History of Alubat Yachts

Alubat is a world-renowned shipyard specialising in aluminium sailing yacht production. Founded in 1973 and located on the west coast of France, in the heart of the Vendée nautical sector, the company quickly became known for its innovative design and quality craftsmanship within the nautical industry. Alubat is responsible for the design, build and sale of Ovni, Cigale, and Alubat 58 yachts, with more than 1500 hulls on the seven seas. Their boats are particularly favoured by nautical enthusiasts, especially for long cruises and expeditions due to their durability, safety and performance.

Over time, Alubat has constantly evolved with the changing landscape of boat manufacturing, especially in relation to sustainability measures and cutting-edge technologies. This has led to a brand rejuvenation in 2017 when the company was bought by new shareholders. Alubat made significant advancements, notably by incorporating more modern architectural designs and advanced ergonomic strategies. This also led to the reintroduction of the new generation of Ovni, which combines the best of their traditional design with modern amenities.

Today, Alubat continues to operate from its original location in Les Sables d'Olonne, France, supported by a network of agents worldwide. Alubat's dedication to exceptional build quality, solid performance characteristics and innovative design, has earned the company a reputation among bluewater cruisers and sailing enthusiasts alike. Maintaining an uncompromising approach towards boat building, Alubat remains in constant pursuit of excellence, blending tradition with innovation to create truly unique sea-faring vessels.

Which models do Alubat produce?

Alubat produce a range of boats including the Alubat Ovni 37 , Alubat Ovni 43 , Alubat Ovni 45 and Alubat Ovni 490 . For the full list of Alubat models currently listed on TheYachtMarket.com, see the model list in the search options on this page.

What types of boats do Alubat build?

Alubat manufactures a range of different types of boats. The ones listed on TheYachtMarket include Sloop , Aluminium boat , Exploration vessel , Cutter and Cruiser .

How much does a boat from Alubat cost?

Used boats from Alubat on TheYachtMarket.com range in price from £64,100 GBP to £735,000 GBP with an average price of £284,000 GBP . A wide range of factors can affect the price of used boats from Alubat, for example the model, age and condition.

Sign up to our newsletter

By submitting this form, you agree to our Privacy & Cookie Policy

Change units of measure

This feature requires cookies to be enabled on your browser.

Show price in:

Show lengths, beam and draft in:

Show displacement or weight in:

Show capacity or volume in:

Show speed in:

Show distance in:

• KM Yachtbuilders
• The Shipyard
• - Aluminium
• - The People of KMY
• - Custom Yacht Builders
• - Design Process
• - Building Process
• The Services
• - Brokerage
• - Painting Service
• - Customer Care
• - Build Your Own Yacht
• - Bestevaer
• - Sailing Yachts
• - Motor Yachts
• - Visit the Shipyard
• - Partnerships
• - Careers (Dutch)

New build yachts

We are specialized in the building and finishing of aluminum custom built sailing yachts and have over 30 years experience.

Is your yacht in need of maintenance, repairs or a large refit? We’re happy to help you with it. We not only work on aluminium yachts but also on steel, polyester or even wooden yachts.

Designed by one of the world’s most legendary sailors as his private yacht. Brought to you by KM Yachtbuilders, the leading builder of aluminium expedition yachts up to 100ft.

We are KM Yachtbuilders

We build aluminium yachts. Starting out with three people and about as many yachts. A few decades later we are a team of 45 with more than 100 builds under our belt and our yachts are sailing the seven seas from pole to pole.

BOOT Düsseldorf

Get ready to experience the world’s largest indoor water sports show and explore the latest in boat technology, equipment and accessories. From sailboats to motor yachts, stand-up paddling […]

Choose your destination, comfortably go wherever you want to go.

Fleet highlights, german frers 105 bolero, allures 39.9 imagine, bestevaer 41 josephine 2, altena 53 happy hours, ovni 400 a plus, bestevaer 63 m/y, bestevaer 36 bv3, hoek 65 weatherly, bestevaer 73 christopher, bestevaer 53 xaos, ovni 43 sanderling, pelagic 77 #2, bestevaer 54 canada, bestevaer 56 panta rhei, bestevaer 53 m/y #3, bestevaer 62 luskentyre, bestevaer 53 my still, bestevaer 45 lionne, bestevaer 53 m/y bryndis, bestevaer 72 symbiose, custom my river tender, bestevaer 45 lene, bestevaer 45 alias, bestevaer 45 godewind, km custom yachts.

A custom built yacht is a journey in itself. Every customer comes with their own set of demands that depend on the purpose of the boat. Decades of experience, teamwork and a profound love of our craft help us to always come up with solutions for the most challenging demands.

Bestevaer yachts

Bestevaer s/y, bestevaer m/y, custom bestevaer 1/1, the world's finest explorer yachts., become part of the km family.

Our team is always ready to assist our yacht owners with advice and assistance in the event of contingencies.

Explore Bestevaer yachts

Designed by one of the world’s most legendary sailors as his private yacht. Brought to you by KM Yachtbuilders.

• Sell a boat

Aluminium sailboats

Aluminum offers an excellent safety / longevity / price / performance ratio. These qualities make it the favorite material of many long trips sailors. The boat holding the world record for the single-handed world tour “the wrong way”, (against the prevailing winds and currents) is an aluminum monohull which finished in 2004 the itinerary Ouessant / Antarctic / Ouessant in 122 days 14 hours 3 minutes and 49 seconds skipped by Jean-Luc Van den Heede. A reference!

You will find here our selection of aluminum sailboats.

AYC, the choice of seamen

• Grand Soleil
• Long trips yacht
• Used powerboat
• Cruise catamaran
• Aluminium sailboat
• Fast cruiser
• Aluminium centerboarder sailboat
• Steel centerboarder sailboat
• Ocean racer
• Motor Yacht
• Wooden sailboat

• Sign In or Register
• Boats for Sale
• Research Boats
• Sell a Boat
• Search Alerts
• My Listings
• Account Settings
• Dealer Advertising
• Aluminum Hull Sailboats

Aluminum Hull Sailboats Boats for sale

1975 Dufour 31

Westbrook, Connecticut

Make Dufour

Category Cruiser Sailboats

Posted Over 1 Month

This boat is an absolute gem – excellent condition, beautifully appointed, comprehensive restoration in 2010 includes Awlgrip repaint (hull & topsides), upgraded Raymarine navigation system (autopilot, radar, GPS, chart plotter). Located in Westbrook Connecticut. Very well-maintained and clean through-out with lots of custom features and amenities. Sloop rig, Fiberglass construction, Bulb keel, Wheel steering - 28 Hp Volvo 2003 Inboard Diesel engine (new in 1993). ACCOMODATIONS: V-berth forward w/stowage, port-side single w/stowage, q-berth port, double berth stbd., enclosed head with hanging locker, chart table to port, galley to stbd., 2-burner propane stove, Adler-Barbour refrigeration, gimbaled stainless steel sink and stovetop, two hatches. CONSTRUCTION: Red fiberglass hull and fiberglass deck (Awlgrip in 2010), wheel steering, lifelines/gates, bow pulpit, swim ladder, bulb keel, skeg-hung rudder. COCKPIT: Pedestal-mounted wheel steering (leather-covered wheel) with binnacle table w/grab-rail. RIGGING: Aluminum mast and boom w/ internal running rigging and jiffy reefing, stainless steel standing rigging, roller furling headsail, boom vang, topping lift, flag halyard, hydraulic backstay adjuster. Numerous upgrades too many to list. Detailed spec sheet provided on request. For details of equipment listing for electronics, cabin & galley, electrical & power, sails, rigging, safety equipment, etc. please call or email me directly using the contact info below.

14' Viking (Sail Fish) Boat ,Fiberglass Hull, Aluminum/Nylon Sail

Boston, Massachusetts

Make Viking

Category Daysailer Sailboats

Length 14.0

FOR PICK UP ONLY. LOCATED IN BOSTON, MA. No Holes. One Owner. Comes with all working parts. See pictures for further details.

1999 C&C 121 Blue Hull

Solomons, Maryland

Make C&C

Model 121 Blue Hull

Category Sailboats

1999 C&C 121 Blue Hull The 121 was the flagship of the C&C Express Series and possesses that elusive combination of uncompromising performance and big, luxurious accommodations. Designer Tim Jacket should be commended. The 121 delivers—this is a legitimate racer-cruiser. The hull is laminated with E-glass and Kevlar. Vinylester resin is used to prevent osmotic blisters. The hull and deck are joined on an inward-facing flange that has an aluminum bar molded into it. The deck is set on the flange in a bed of 3M 5200 and then fasteners are drilled and tapped into the aluminum. C&C’s trademark toerail is incorporated in the joint, and the aluminum bar acts as a full-length backing plate. A structural grid and hull pan are bonded to the hull, and the bulkheads and internal furnishings are bonded with adhesives developed for the aerospace industry. A fiberglass integral web, spreading the rigging loads over a large area, supports the chainplate pods. Deck fittings are backed with 1/4-inch aluminum, which is tapped to allow fasteners to be set and removed for periodic servicing. The 5,500-pound, high-lift keel is bolted to the hull. She has  5-foot shoal-draft making her a perfect Bay Yacht. The 121’s cockpit is designed for efficient sailing. The Edson rack-and-pinion steering system is exceptional. The steering is tight and there is plenty of feel. The primary winches are set well aft and easily reached from the helm, a tip-off that the boat is not just designed to be sailed with a large crew. Every control line is led aft from the base of the mast under the deck to the cockpit. As noted earlier, these keep the cabintop clean.

2013 MACGREGOR 26M SAILBOAT BLACK HULL

Springfield, Virginia

Make Macgregor

Length 26.0

I bought this boat brand new in 2013 and with full factory equipments that factory had to offer at the time. My wife does not like it so I ended up buying another 24' jet boat and I have to sell this one. It is currently at my slip at Washington Sailing Marina. I only sailed for one hour with my instructor and used the motor approximately less than 3 hours to run around a little bit and that was it. I spent most my time on my 24' jet boat. I enjoyed the time with this sailboat mostly on installing electronic equipments, stereo system, bow thruster. That's right, I installed Sideshift bow thruster to help make it much more maneuverable and easier to moving in and out of slip under any condition. Sideshift is the only best company making add-on bow thruster, a very high quality thruster. You can visit them at www.sideshift.com. Black hull is rare and it is awesome to look at. In fact, I have many good comments from bystanders. There is absolutely nothing wrong with this boat. You can have a peace of mind and never have to wonder if anything is wrong with it; just like buying a used car and wonder if it has ever been in an accident. I also have this boat listed locally, so I preserve the right to end this listing early if someone bought it. If you are in the market for an excellent used Macgregor sailboat, then this is it. My lost if your gain. Please make an offer only you are serious about it then we can arrange a sea-trial; otherwise, lets not waste each other time. My contact is [email protected] . Here the list of items on this boat, I might miss a few thing. sideshift bow thruster SS230 serie. Visit www.sideshift.com for more details on this awesome bow thruster. Extremely useful in maneuvering tight spot and under severe whether condition. A must for any 26’ boat. Aluminum trailer with deluxe trailer upgrade: include brake actuator, disc brakes, galvanized torsion bar axle, aluminum brake caliper housings, and since plated brake discs.Black Hull gelcoat with white stripes and underbodyEvinrude E-tec outboard 60 hp engine white color, this engine also have built-in diagnosis system to check itself every time you start the engine. Top speed about 20 mph, 7000 rpm, winterize this engine take about one minutes, it basically winterize itself. Outboard linkage: links the engine and rudder so the steering wheel will move both the outboard engine and rudder at the same time.Transom ladderGarmin 547xs chartplotter/fishfinder combo with transom mount transducerNMEA 2000 network cable added so that the garmin 547xs can read and display the engine critical data.Genoa sail with CDI furling systemBoom vangMain sail furling system to raise the main sail up and down with ease, very nice feature.Mast raising systemSony marine amplifier and Kicker subwoofermarine CD/MP3 head unit 2 sony marines 6 1/2” speakers2 clarion marine 6 1/2” speakersAlcohol and electric stovecockpit filler cushionscockpit black bimini to match with black hull2 stainless steel cockpit cup holder1 LED cockpit light to light up the cockpit at night6 LED courtesy lights inside cabin120 V power inverter. cabin fananchorsolar power exhaust fan to suck out moisture 200 Walt solar power panel to recharge battery while sailing out there.Total of 4 deep cycle batteries bank on board2 gas tank for a total of 17 gallons.

Rebel 16 Mark II Sailboat with Aluminum Trailer

Angola, Indiana

Length 16.6'

Stable fiberglass sailing boat carries six people (or 1170 pounds). Includes trailer, full rigging, and TWO suits of sails. One suit of sails is in like new condition, the other set is in very good condition. Serial number 1929 (built in late sixties to early seventies I believe). The centerboard swings up into the cockpit, so you can change the depth to dock in shallow water. The rudder also swivels up if it hits an obstruction. The trolling motor in the photos is not included. There is, however a permanent motor mount on the stern. The boat will take up to a 5hp motor, but my 30lb. thrust trolling motor drives it around just fine. The boat is located on West Otter Lake, Angola, IN. Buyer with the selling price in cash or Pay Pal payment can drive it away. (Trailer takes an 1 7/8" ball hitch.) The following article from Sailing Magazine gives a great description of Rebel sailboats. You can access the original on SailingMagazine.net. Rebel 16 2008 January 8 By Staff This nimble and tough classic is perfect for a daysail or a day of racing This year the boat that holds claim to being America's first production fiberglass one-design will celebrate its 60th birthday. That the boat is still in production makes this milestone that much more remarkable. In 1948, fresh out of the Navy, Ray Greene began building a 16-foot family daysailer out of his Toledo, Ohio, shop using a revolutionary new material called fiberglass. The design of the boat was based on lines drawn by a local high school drawing instructor by the name of Alvin Younquist. With its wide, 6-foot, 7-inch beam and 110-pound steel centerboard the stable little boat known as the Rebel soon became a hit on the Midwest's inland lakes. And while Greene said he never intended to create a racer, thanks to the boat's performance-courtesy of a large 120-square-foot main and 46-square-foot jib on a fractional rig-it wasn't long before a competitive structure was built around the boat. By 1952 a class association had been firmly established and by 1963 the class boasted 138 active members. Not bad. Fleets started popping up across the Midwest, south into Kentucky and all the way down to Texas. Meanwhile, class members could be found sailing the inland lakes of the Eastern Seaboard from New York to Florida. After 25 years of building the Rebel, with more than 3,000 hulls produced, Greene was ready to call it quits and sold the works to a group of Chicago investors. Production of the Rebel continued at a steady pace during the 1970s, and was done under a number of names: Melling Tool Co., Rebel Industries and finally Spindrift One Designs. After Spindrift folded, the Rebel moved to Michigan in 1988 when Nickels Boat Works of Fenton took over with the production of the Mark V model. Nickels continues to build the Rebel, offering buyers a choice of a daysailer version for $9,860 or the optimum racing version for $11,872 less sails and trailer. A stainless steel centerboard now comes standard with the Rebel. Nickels also continues to be a great source for parts and accessories, as well as information, on the Rebel. One tough Rebel While there have been reports of problems with the foam flotation on older boats becoming waterlogged, that has been less of a problem on boats from the 1970s and later. Other than that, a buyer of a used Rebel should find few issues with the condition of this durable little boat. Indeed, boats 25 years and older will still top regatta leaderboards. "They're well made, very rugged boats that will last forever," said Al Vorel, National Rebel Association Commodore, who has been racing the same boat, No. 3914, for almost 20 years. "You don't have to run out every 5 to 10 years to buy a new boat." This is one of the reasons for the longevity of the class. Boats tend to stay in the family, passed down from parent to child, with the younger generations wanting to keep the racing going. "My mother races, and my daughter sometimes races, so there are times we'll have three generations on the course," Vorel said. This also, of course, keeps a lot of boats off the market, and finding a used Rebel can be a bit of a challenge. But thanks to the Internet, it's possible to locate a few sellers. Prices can vary from just under $1,000 for an older boat in need of some work to $3,000 or more for a later model. Buyers can typically expect to pay in the neighborhood of $1,500 for a pre-Nickels-era boat in good shape. We were fortunate enough to find a late 1970s Rebel listed for sale on www.craigslist.org. Better yet, the seller was within trailering distance. The offer on the boat was $1,400, so we drove out to take a look. The boat was well cared for, kept under a roof winters, and showed no structural damage. Other than some algae stains and scuff marks the finish looked good, and all the gear was there, including the main and jib, which the owner said he bought new about seven years ago. We did see some possible issues, including a rusty, pitted centerboard and a wooden rudder that looked to have some rotting. So we offered to pay the full $1,400 if the owner threw in the trailer, which he originally wanted an extra $200 for. The deal was closed and we drove off with the Rebel in tow. Rebel with a cause With the boat parked in our yard the first item of business we wanted to take care of was the rusty centerboard. Nickels offers a stainless steel replacement board, and we could picture how sweet the boat would look with a shiny new stainless fin. Unfortunately, these centerboards run close to $1,000; more than two-thirds the cost of the entire boat. So such an extravagant purchase didn't make much sense. Instead we set about rehabilitating the old board. We removed, with a bit of difficulty, the 110-pound board and set in on sawhorses. The first step was to remove the old paint using paint stripper, then power sanding. We then slathered on some Duro Naval Jelly to remove the rust, wiping down everything with paper towels then finishing up with a clean, acetone-soaked rag. Next, we filled in the pits and hollows with West Marine Surfacing Putty, and sanded everything smooth. We made certain the blade was fair by running a straight edge along the board. We also further faired the rounded leading edge of the board to within the class rule limits, which prohibit tapering less than 1/16th of an inch and more than one inch in from the leading edge. We then primed the board with several coats of Interlux Primocon primer, which when dried we wet sanded with 400-grit paper, and finished with a couple coats of Interlux VC-17m Extra bottom paint. With the centerboard done, we then turned to the rudder. An ice pick determined the wood was beginning to rot near the lower trailing edge. We probably could have rehabilitated the rudder as well, but since we had saved some money by not replacing the centerboard we decided to spring for a new rudder. We opted for a fiberglass blade, supplied by Nickels for $375. This cost covered just the blade, as the original aluminum rudder cheeks and hardware were still in good shape. While we were on the phone with Nickels, we decided to order all new running rigging to replace the weathered lines the boat came with. This included lines for the cunningham, boom vang, centerboard system, as well as sheets and halyards for both main and jib. The total for 112 feet of ¼-inch line and 105 feet of 5/16-inch line came to $100. Next we took a closer look at the standing rigging. The spars showed no defects, and with a bit of metal polish and elbow grease the rotating mast, boom and aluminum whisker pole looked good as new. The 1-by-9 stainless steel shrouds and forestay also showed no visible defects. We did, however, find the diamond stays on the mast to be tuned rather tight. According to the North Sail's One-Design tuning guide for the Rebel, an overly tight diamond can limit fore and aft mast bend, and can even cause negative pre-bend, where the mast bends forward at the tip. Since we want to have a competitive boat, we loosened the diamond tension and will readjust after doing some sea trials. As we said, we ultimately wanted to race our Rebel and didn't want a slow boat. So obviously the 7-year-old suit of sails had to go. This would be our biggest expense, and a new suit of sails would alone exceed the original cost of the boat. A new main and standard jib (a light air jib is also available) from North Sails set us back $1,615, which included $20 for class royalties but not shipping. Certainly this was a blow to our budget, but we rationalized it by thinking about the fun we would be having with some close racing come summer. Our last order of business was getting our bottom clean and smooth. We first scrubbed the hull down with a detergent then wet sanded everything below the rails to a slick surface with 1,200-grit paper. After a rinse and wipe down with the hose and clean towels we were satisfied we had a slick bottom. We finished off by treating all our hardware and moving bits to a little McLube Sailkote spray. We now have what we feel will be a contender on the course for our racing crew of two. Yet, with the roomy Rebel cockpit that can seat six, we're also looking forward to some lazy summer daysailing when friends and family show up. Either way, we'll certainly get our money's worth from this tough but nimble little classic. LOA 16' 1.5" LWL 15' 10" Beam 6' 7.5" Draft 3' 4" Weight 700 lbs, Sail area 166 sq. ft.

1985 Bluewater Ingrid

Muskegon, Michigan

Make Bluewater

Model Ingrid

1985 Bluewater Ingrid The Ingrid 38 from the pen of William Atkin is a heavy displacement blue water cutter derived from Colin Archer's famous double ender designed North Sea pilot boats, which in turn were inspired by Viking boats renowned for their heavy weather characteristics. Perhaps Atkin sums it up best by saying it's "the kind of boat that behaves herself in rough water and can be depended upon to sail herself". (To that part we do hear frequent mentions of the superb one-finger-on-tiller tracking and a comfortable ride.) With her old world style, Josette's a good looking boat with a sheer line reminiscent of Crealock's famous Westsail 32. Her seaworthiness is there to see in her full keel, heavy displacement and overbuilt construction. Her hull is heavily hand laid in fiberglass. There's robust outboard chain plates and an outboard rudder protected by extra fiberglass and a large bronze shoe casting should she scrub the bottom. Atkin's main rework on the Ingrid 38 from Archer's original design was finer entry on the bow which 'cushions' her landing off the waves and even may increase speed slightly. Below the waterline she has a long full keel with deep v-sections forward keeping her stable in the rough. The ballast is encapsulated and is distributed from bow to stern, to keep the weight as low as possible. Rounding this off, there's plenty of flotation designed in her ends, fore and aft which helps keep her dry. The trade off of heavy displacement and ultimate stability is usually in speed so the Ingrid 38 is not considered fast. By the numbers, her hull speed works out at 7.2 knots but she'll more often manage a consistent 6 knots while cruising. Surprisingly she's known to sail pretty well in light airs, as owners report she'll do half the wind speed in up to 8 knots of wind. However, she's a boat that comes into her own in heavier seas. The cutter rig gives plenty of options on all points of sail and she's an easy boat to single-hand. Josette is her original name and she has spent most all of her life in fresh water. She only spent one year in salt water in 1985, her original launch year. This is a one-owner vessel. The hull was built in 1974 by Bluewater Yachts in Washington state and it is reported that these are the same builders that build the Nordic Tugs. The interior cabin sides (ceiling) were finished in planking by the original owner. The hull is foam insulated to keep you cool when it is hot outside and warm when it is cold outside. The galley area is a great work space for any type of cooking. The mast is anodized aluminum construction by MetalMast Marine, with internal halyards. The hull is solid fiberglass construction and does have some gel coat surface blisters above the waterline, but they do not appear to be structural. She recently had the following engine work accomplished: new head gasket, two new exhaust valves, injector service,

1987 Don Brooke Worldcruiser

Miami, Florida

Make Don Brooke

Model Worldcruiser

1987 Don Brooke Worldcruiser Huge Price Reduction!VICTORIA ESTEFANIA is a husky Don Brooke design built in the USA by ISM. She has a full keel steel hull, and aluminum superstructure, and was built to Lloyd’s 100A1+ class with three watertight compartments.Layout has inside and outside helm stations, four staterooms, and three heads/showers.Power is an economical single 325 HP Cummins diesel with 30HP hydraulic bow thruster. The full keel protects the prop and rudder. Electrical system has 3 generators, large battery banks, several inverters, and a world power converter. The ketch rig has Navtec rod rigging and all hydraulic furling and winches.Extensive $400,000 refit fall 2011 included all new paint, new batteries and cabling, rebuilding engine, transmission, and 2 generators, one new generator, and much other mechanical work. 2016 Update:"V.E." is still kept in good order-last year she had a lot of paintworkNew propellor shaft and bearings-steering gear serviced with a new rudder stockBlack tank pressure washed out and a new pump fittedNew main life-raftNew onboard computers and multi function printerCrane servicedSailing dinghy servicedMain tender rewired and new VHF radioFitted-bottom had some refairing done-and 3 coats of antifouling-prop anode changed.

1985 Bluewater Ingrid The Ingrid 38 from the pen of William Atkin is a heavy displacement blue water cutter derived from Colin Archer's famous double ender designed North Sea pilot boats, which in turn were inspired by Viking boats renowned for their heavy weather characteristics. Perhaps Atkin sums it up best by saying it's "the kind of boat that behaves herself in rough water and can be depended upon to sail herself". (To that part we do hear frequent mentions of the superb one-finger-on-tiller tracking and a comfortable ride.) With her old world style, Josette's a good looking boat with a sheer line reminiscent of Crealock's famous Westsail 32. Her seaworthiness is there to see in her full keel, heavy displacement and overbuilt construction. Her hull is heavily hand laid in fiberglass. There's robust outboard chain plates and an outboard rudder protected by extra fiberglass and a large bronze shoe casting should she scrub the bottom. Atkin's main rework on the Ingrid 38 from Archer's original design was finer entry on the bow which "cushions" her landing off the waves and even may increase speed slightly. Below the waterline she has a long full keel with deep v-sections forward keeping her stable in the rough. The ballast is encapsulated and is distributed from bow to stern, to keep the weight as low as possible. Rounding this off, there's plenty of flotation designed in her ends, fore and aft which helps keep her dry. The trade off of heavy displacement and ultimate stability is usually in speed so the Ingrid 38 is not considered fast. By the numbers, her hull speed works out at 7.2 knots but she'll more often manage a consistent 6 knots while cruising. Surprisingly she's known to sail pretty well in light airs, as owners report she'll do half the wind speed in up to 8 knots of wind. However, she's a boat that comes into her own in heavier seas. The cutter rig gives plenty of options on all points of sail and she's an easy boat to single-hand. Josette is her original name and she has spent most of her life in fresh water. She only spent one year in salt water in 1985, her original launch year. This is a one-owner vessel. The deck and hull was built in 1974 by Bluewater Yachts in Washington state and it is reported that these are the same builders that build the Nordic Tugs. The interior cabin sides (ceiling) were finished in planking by the original owner. The hull is foam insulated to keep you cool when it is hot outside and warm when it is cold outside. The galley area is a great work space for any type of cooking. The mast is anodized aluminum construction by MetalMast Marine, with internal halyards. The hull is solid fiberglass construction and does have some gel coat surface blisters above the waterline, but they do not appear to be structural. She recently had the following engine work accomplished: New head gasket, two new exhaust valves, injector service, new

2008 Catalina Sabot

Lake Ozark, Missouri

Make Catalina

Model Sabot

2008 Catalina Sabot The U.S. Sabot by Catalina continues the tradition of the thousands of Sabots sailing today as the perfect first boat for the beginning sailor due to its simplicity and saftey. Equipped with the racing package, the Sabot offers all the sail controls of a larger boat, so learning sailors can develop the full range of sail trimming skills. TheSabot is built to withstand the tough use of a learning sailor. The full flotation hull is made of innner and outer hand-laid fiberglass parts for durability. The mast is tapered fiberglass and the boom is anodized aluminum.

1980 Naval de Kerlevin Schooner

Marina, California

Make Naval De Kerlevin

Model Schooner

1980 Naval de Kerlevin Schooner Just completed circumnavigation since 2005 to Present with continual upgrades.Built Chantier Naval de Kerlevin Yard, Concarneau, Southern Brittany, FranceSolid fiberglass HullSimi Full Keel with Stainless Steel CenterboardNew Teak decks epoxy on 2012Westerbeke 7.6kw Generator 2006Phasor 3.5kw Generator 2005WatermakerWasher Dryer2690 Hours on Rebuilt Perkins 6-364 180hp Turbo DieselAluminum Masts Replaced 1997 Richmond, CARod Rigging replaced 2012Rudder Bearings replaced 2014Painted Topsides w LP Paint 2010Great Mid Cockpit with custom tableAft Helm CockpitEasily sailed Schooner RigReady to make the next journey or ideal charter vessel.Review Full Specifications

2002 Dehler 34

Fort Lauderdale, Florida

Make Dehler

2002 Dehler 34 DEHLER 34 sailing Yacht , year of construction 2002, Hull construction material P. R. F. V , length A O 11.21m , max width 3.20 m , draft 1.88 m,  4.5 tons ,  1 wheel ,  passengers maximum crew no. 6,  Sail area 56,6 sq m   Sail wardrobe: n°1 genoa  n°1 genoa Northsail n°1 main in Kevlar e fughe carbonio Zauli n°1 spinnaker Zauli 105 sq m n°2 cruising main (elvstrom) n°1 gennaker north new sail area 99,7 sq m   Engine: n° 1 Saildrive a Desiel Yanmar 2GH20FC , 2 cylinder , capacity 636cc , max power 13,4 Kw , battery n°2 SAFA 12 volt 75 Ah (one engine and on service) Fire extinguishers one automatic   Safety equipment  Bilge pump manual with handle in cockpit, Automatic electric bilge pump, Hourse shoe life bouy with light, Liferaft Arimar,Life Jackets, Set of Flairs,Radar riflector+First Aid box, Binoculars   Instuments on Board:  Magnetic compass  , Log and Eco Raymarine ST60 Tridata , Wind inst. Raymarine ST 60 CH wind , stazione del vento Raymarine ST60 wind,gps with Map Vision 07,VHF Rauff & Sorensen Shipmate RS 8400   On Board Inventory:   Anchor winch and bow roller for Bruce Kg with Chain , Genoa foil Furlex , winches n°2 Lewmar 44 - n° 2 Lewmar 30 , Aluminum spinnaker pole, Carbon bow sprit ,  Bimini , Hot and cold cockpit shower , Stainless Steel bathing platform ,Battery charger Mastervolt , boiler new Quick under guarantee pressurised water, Gas Cooker with 3 burners and oven in S.S  , Fridge top loading.   Sail Geometry :  sloop 7/8;  2 s[redders on the mast, . 2winches self-tailing 2 speeda on coach roof and a set of jammers for the sheets and halyards going aft,2 genoa winches, self tailing and two speed. 2 winches for the Genniker . The engine has 20 hp powering a Sail-drive driving a two bladed prop.  Fuel tank is a galvanised unit with a capacity of 50l .   The water tank has a capacitye of 150 l. Internal Layout: Two cabin with hanging lockers and ventilation. The dinette has a C  configured seating ,un tavolo centrale con ante ribaltabili di legno di Mogano e due gambi d'acciaio, un divano ,la cucina a cielo aperto con doppio lavello di acciaio inox e rubinetto miscelatore,piano da carteggio con sedile. The heads has a manuale Jabsco toilet, sink and shower hot and cold. The hull is very sound with no sighn of blistering or dampness, and it is certain that there is no osmotic areas. The boat has been surveyed for insurance purposes and certified to have a value of 75.000 euro , The asking price iof Euro 49,000 is only slightly negotiable as the boat is like new. All certification has been updated and all tes

1974 Standfast - PJ Standfast 36

Make Standfast - PJ

Model Standfast 36

1974 Standfast - PJ Standfast 36 New Listing of a very reputable boat designed by Frans Maas, a successful Dutch Naval Architect that gained fame in the 60's and 70's, designing sailboats under the RORC rule and IOR. To add to the pedigree, this boat was exclusively marketed  by Palmer Johnson.  This is a fiberglass, not aluminum sailing yacht. This boat has been owned by a local sailor and his wife and they have enjoyed cruising the southern New England waters for many years.   The boat is well maintained.    It has fiberglass decks, a fin keel and a skeg for rudder support.  Mast height above the water is 54'.  Hull is dark blue.  Boat is stored outdoors with a shrink wrap for the winter. These boats were built as Standfast Yachts.  Sold in the US also as Palmer Johnson 36's.        I - 48.9' (14.9m)    J - 15.4' (4.69m)    P - 43'  (13.11m)    E - 12'  (3.66m)            Sail Area/Disp:  15.30    Bal./Disp:  40.69%     Disp/Len.:  314.84 The Standfast 36 is a strong, offshore capable boat that was designed ahead of its time.   Still carrying more modern, graceful lines with a reverse transom.  Boat has a comfortable interior, newer, easily accessed Yanmar 27Hp diesel, sheltered cockpit, full galley, dinghy, outboard, liferaft and plenty of extra gear.     This blue-water capable boat is ready for another season, as soon as spring breaks.

1979 Endeavour 32' Sloop

Kemah, Texas

Make Endeavour

Model 32' Sloop

1979 Endeavour 32' Sloop PRICE REDUCED $7,000! SELLER SAYS SELL NOW! The Endeavor 32 is known for her comfort and versatility and configured with a fixed shoal keel and 4'2" draft, extensive interior storage and access, fully equipped galley, integral companion way stairs, and a teak cabin sole. The hull is molded as a single unit of a combination of polyester resin and fiberglass woven roving and multidirectional chopped strand fiber (MCSF). The keel is molded integrally with the hull and all ballast is contained inside. The deck and cockpit, like the hull, are molded as a single unit of a combination of polyester resin and fiberglass woven roving and MCSF. Plywood coring is incorporated between layers of fiberglass in the cabin top, deck, seat, and cockpit sole areas to give additional stiffness.  There is an anchor well at the bow with anchor rode into the vberth locker, teak grab rails on the cabin top and a large aft cockpit with good back rests and storage lockers. The companionway goes down to seat height, about 12" above the cockpit sole, and has three drop boards. The rudder is molded as a single piece of solid high density foam with a protective skin of fiberglass and gelcoat finish. The rudder post, molded integrally with the rudder, is solid stainless steel, welded to a steel blade in the interior of the rudder. Where the rudder post passes through the hull, water tightness is ensured by means of a stuffing box. The steering system operates with stainless steel cables rotating a quadrant bolted and keyed to the rudder post. All spars (mast, boom, and spreaders) are extruded aluminum alloy, with protective coating. The main mast is stepped on deck with a supporting post immediately under the mast inside the cabin. The standing rigging is made of stainless steel wire. The forestay attaches to the stem head fitting at the bow, fabricated of welded stainless steel back plates through bolted to the hull. All other stays and shrouds are attached to chainplates at the edge of the deck and are through bolted to the hull. Additional fiberglass reinforcement is molded into the hull in all chain plate areas. All halyards are run externally to #32 Lewmar winches mounted on the mast. Sheets are led to #40 Lewmar self tailing winches in the cockpit. Sheet lead blocks clip to the toerail. The main sheet traveler is mounted on the companionway 'bridge deck'. The interior of the Endeavour 32 is a molded fiberglass unit with bulkheads and cabinetry fastened to it with screws, bolts, and adhesives. The entire unit is preassembled outside the boat and is bonded in place with woven roving and mat, that when completed, forms a single unit structure having great strength and rigidity. The interior is finished with varnished teak with soft white overheads. The

1962 Sparkman & Stephens 55

Make Sparkman & Stephens

1962 Sparkman & Stephens 55 PALMER JOHNSON 55 sailboat project 55 ft Palmer & Johnson, isanti or ashanti Sparkman & Stephens design aluminum magnesium construction no rust. strong hull. What WORKS on the boat:1) original engine and transmission both work very well.2) windlass works very well, fairly new hydraulics added.3) hull is in great condition and VERY strong. Does not need work. What NEEDS TO BE FIXED/ CHANGED1) electricity on board2) plumbing 3) needs sails4) wood floors need to be changed5) overall just cosmetic work needs to be done FINANCING AVAILABLE!!

Narrow Results

Current search reset all.

• Keyword: aluminum hull sailboats
• Catalina Yachts (4)
• Com-Pac (4)
• Beneteau (3)
• Bluewater (3)
• Catalina (3)
• Macgregor (3)
• Bavaria (2)
• C&C YACHTS (2)
• Cape Dory (2)
• Cheoy Lee (2)
• Don Brooke (2)
• Formosa/Transworld (2)
• Jeanneau (2)
• BENETEAU (1)
• Buzzard's Bay 14, MacDougalls' (1)
• Buzzards Bay 14, Herreshoff (1)
• Buzzards Bay 14, Herreshoff, (1)
• Cheoy Lee (1)
• Chrysler (1)
• Endeavour (1)
• Fountaine Pajot (1)
• Lippincott Boat Works (1)
• Murray 33 (1)
• Nauticat (1)
• Naval De Kerlevin (1)
• Pearson (1)
• Skookum Marine (1)
• Sparkman & Stephens (1)
• Standfast - PJ (1)
• Topper Hermanson (1)
• Unlimited (1)
• WD Schock (1)
• Wauquiez (1)
• Sailboats (30)
• Sloop Sailboats (16)
• Daysailer Sailboats (10)
• Cruiser Motorcycles (4)
• Cruiser Sailboats (1)
• Florida (25)
• California (8)
• Maryland (6)
• Massachusetts (5)
• Michigan (4)
• North Carolina (3)
• Virginia (3)
• Connecticut (2)
• Indiana (2)
• Georgia (1)
• Louisiana (1)
• Minnesota (1)
• Mississippi (1)
• Missouri (1)
• New York (1)
• Ontario (1)
• Pennsylvania (1)
• Rhode Island (1)
• South Carolina (1)
• US Virgin Islands (1)
• Washington (1)
• Wisconsin (1)
• Search Title Only
• Has Picture
• Include Sold Listings

Showcase Ads

2019 Yamaha sx 190

Descanso, CA

2005 Wellcraft 35 CCF

San Diego, CA

2023 skeeter zxr 21 zxr

Austell, GA

2021 Axis T22

2003 Chaparral 320 Signature

Buffalo, NY

2012 Cobalt Boats 242

Chesapeake, VA

1989 Sea Ray 390 Express Cruiser

Sarasota, FL

Create Alert

Please, name this search

Select Interval

Alert Successfully Created

Be Bold. Be Antifragile.

Don't miss another video, subscribe to our channel

Alubat [al.u.bat] noun | Aluminium Bateau | Aluminum Boat

Open House at Alubat

Join us at the Alubat boatyard in Les Sables d’Olonne, France for our Open House this coming May 31 to June 1 and get on board a new OVNI 370 and OVNI 430.

Amazing 43-ft Aluminum Sailboat

Full-time cruisers Roberta and Duca stopped by to visit us during the La Rochelle Boat Show for a tour of the NEW Ovni 430.

The ‘Small’ Huge Sailboat

Tour of the new Ovni 370 with Duca and Roberta on their YouTube channel Odd Life Crafting.

Aluminum Sailboat Misconceptions

“I have a friend, who knows a guy, who has a cousin, that bought an aluminum boat, and after a week in the marina the bottom fell out of her”.

Alubat Pricing

How Much Does a Well-Equipped Alubat Ovni Cost? Find out how we price the Ovni range of aluminum sailboats for the serious off-shore cruiser.

OVNI 490 Preview

The 490 shares some of the hallmarks of the Ovni range: shaft drive, full sailplan, centerboard, and spacious interior with a raised salon layout.

50 years of sailing excellence!

FIGARO nautisme | by François Tregouet

Half a century old and still thriving, Alubat, the Vendée-based shipyard, is not content with just being one of the world’s benchmarks in ocean cruising with its iconic Ovni yachts. Instead, with the enthusiasm of youth, it is preparing to launch three new monohulls over the next two years.

Link to read article [PDF]

STRENGTH ACROSS THE FULL RANGE OF ALUBAT Aluminum SAILBOATS

The new generation OVNI 370 with an inverted bow for improved performance and expanded the interior volume.

The new generation OVNI 430 with an inverted bow for improved performance and expanded the interior volume.

What sets the OVNI 490 apart are the protected pilot house and twin engines. 

The OVNI 450 stands out from the OVNI range and maintains a traditional cabin top styling.

Designing and building aluminum boats for blue water sailing. ​

The  Alubat shipyard  has been designing and building aluminum boats for blue water sailing since 1973. With more than 1,600 yachts built and with 50 years of expertise in metal work and carpentry, Alubat has unparalleled experience in the aluminum sailboat market.

Discover More

Aluminum is green

By having the ability to beach your boat, inspecting and servicing your yacht becomes less daunting than having to haul out.

beach your boat

Go places where other sailboats can't.

Centerboard advantages, navigate shallow water.

From the turquoise waters of the Bahamas to the Alaskan ice fields, a lifting keel gives you the peace of mind to navigate in shallow water. 

The centerboard doesn’t sacrifice performance or safety, in fact, it can enhance performance when it comes to downwind sailing. 

Another advantage of a centerboard is the expanded possibilities to find docking in marinas that would otherwise be too shallow for a fixed keel sailboat.

Without the limitations of fixed keel boats, your cruising opportunities can take you through the maze of Europe’s ancient canals and the historic North American waterways.

The centerboard can be lifted manually or by using a hydraulic system.

traverse canals

Owners sharing experiences from around the world.

CIGALE 15 QR

ALUBAT AMERICA

ALUBAT SHIPYARD

TRAVEL BOOKS

@ 2024 Alubat America. All rights reserved.

Asking $ 7,700,000

VISION F 82ALU Yacht for Sale

Specifications, accommodations, dimensions & capacity, construction.

Complete the form below and one of our experienced sales brokers will be in touch soon.

Full Details

Detailed descripition.

VISION F - 82ALU

CHARISMATIC AND STYLISH

One of the most noticeable aspects of the VF 82 Alu Yachting are the external design lines that give the boat a captivating attitude. The VF 82 features a striking design that makes use of the nobility of black. The boat nearly resembles a swan, with all kinds of features that will make its owner feel rich. The VF82 Alu offers exceptionally vast living areas and the ability to approach anyplace with ease because to its length of 23.9 meters, width of 9.9 meters, and 0.80 meter draft.

With the VisionF brand, a cutting-edge engineering approach, and the production of luxury yachts that are ahead of their time for each individual customer in the Power Catamaran segment, Via Group makes Turkey the first in every field in which it invests and continues to be the innovator in the maritime industry. With one of its newest models, the VF 82, VisionF provides its clients with a yachting experience that is ecologically responsible. The VF 82 stands out from all catamarans with its power, capturing the interest of sea enthusiasts with its distinctive design and features that don’t sacrifice luxury. It also offers a safe maritime environment with its comfort, big living areas, and sturdy aluminum hull.

LIKE A 7 STARS HOTEL

With a 54-square-meter hall, the VF 82 Alu has the finest aesthetic appeal. With its contemporary design that represents you, it offers you the chance to experience one-of-a-kind moments. It features a couch set that is comfortable for 10, a modern dining table for ten people, strong sound systems, and alcantara wall coverings. VF82 Alu provides a nice vacation with its spacious places and the opportunity to take in the sea view owing to its huge Windows.

The large cockpit that welcomes you where you take your first step into the VF82 Alu is one of the most special areas of the boat. The dining table for 8 people in this section provides comfort beyond the ordinary with its resting area and wide door opening to the living room. When you enter the saloon, you will better understand how special a boat it is. The Alcantara wall coverings play an important role in the elegance of the boat, with a dining table for 10–12 people located on the left side of the 54-square-meter area, leather-covered chairs, and L-shaped seating groups positioned on the right side of the saloon. Offering the chance to enjoy the sea to the fullest thanks to its wide windows, Vf82 Alu promises a peaceful holiday with its spacious spaces.

The   82 Alu yacht boasts an impressive 54 square-metre main saloon and luxury accommodation for up to eight guests across four staterooms. Her starboard side hull houses a large master stateroom, a twin-single guest stateroom and a crew cabin, while the portside hull includes the galley, and two luxurious ensuite guest staterooms forward, with a crew cabin in the bow.

The flybridge of the   82 Alu yacht can be reached from the aft deck and has an exterior helm station. The space is perfect for relaxing or entertaining, with comfy sunpads, upholstered weather resistant seating and panoramic views. Wide, teak-clad steps lead to her swim platform, which can be hydraulically lowered for easy access to the water and raised for storing her Williams jet tender.

 In terms of performance, the   82 Alu catamaran is equipped with twin   IPS engines, which provide her with a top speed of 16 knots and a range of over 1,800 nautical miles.

Similar Yachts for Sale

Vision f yachts for sale.

Proud to be part of the MarineMax family

© 2024 Northrop & Johnson

• Change Your Dealer

• Mod V Boats
• BASS TRACKER CLASSIC XL
• PRO TEAM 175 TF
• PRO TEAM 175 TXW
• PRO TEAM 190 TX
• PRO TEAM 195 TXW
• PRO TEAM 195 TXW TOURNAMENT EDITION
• Deep V Boats
• NEW SUPER GUIDE V-16 SC
• PRO GUIDE V-16 SC
• PRO GUIDE V-16 WT
• PRO GUIDE V-175 WT
• PRO GUIDE V-175 COMBO
• TARGA V-18 WT
• TARGA V-18 COMBO
• TARGA V-19 WT
• TARGA V-19 COMBO
• NEW GRIZZLY 1036 JON
• NEW GRIZZLY 1236 JON
• NEW GRIZZLY 1436 JON
• GRIZZLY 1648 JON
• GRIZZLY 1754 JON
• GRIZZLY 1648 SC
• GRIZZLY 1754 SC
• GRIZZLY 1860 CC
• GRIZZLY 2072 CC
• GRIZZLY 1654 T SPORTSMAN
• GRIZZLY 2072 CC SPORTSMAN
• GRIZZLY 2072 CC SPORTSMAN KICKER
• Shop All Boats
• Build My TRACKER

America’s Best-Selling Aluminum Fishing Boats

For more than 40 years, TRACKER® all-welded aluminum boats have helped families catch fish and make memories.

• Founding Members Club
• About TRACKER
• NMMA Certified Boats
• Download a Brochure
• Proven Quality
• Proven Performance
• Progressive Sponsor

Buying & Financing

• Ready to Buy?
• A Smart Buy In Boating
• NO HAGGLE NO HASSLE
• TRACKER Elite Dealers

Learning Center

• Boat Covers
• Custom Trailers
• All Articles
• Warranty Information
• Warranty Claim
• Warranty Transfer
• Order Parts
• Tournament Rewards
• Manuals & Guides
• Request Info
• Find A Dealer

THE WORLD’S BEST-SELLING FISHING BOATS

For as little as $5 per day.

CLUB Exclusive Special Financing

Spend $500 or more with your CLUB card on Tracker purchases at Bass Pro Shops and Cabela’s Boat Centers, Tracker Boating Centers, or select qualifying Independent Dealers February 8-March 27, 2024 to receive 0% Interest for 12 Months. After that, 9.99% Bass Pro Shops and Cabela’s Purchases APR will apply. Click "See Rates & Terms" to see important disclosures and rate and fee information.

TRACKER Aluminum Fishing Boats — Fish The Finest

Mod v boats, bass & panfish fishing, deep v boats, multi-species fishing, hunting & fishing, build my tracker boat.

Choose your TRACKER fishing boat to build and price. Spec it out in real-time and add the options you need to fit your style of fishing and boating! Select your outboard, electronics, color, trolling motor, and more. You configure. We build and deliver.

IT'S MORE THAN A BOAT, IT'S A TRACKER.

Easy to shop. easy to buy. easy to own..

BOAT SALES CONNECTION

Do you have questions about which boat is best for you? Are you ready to buy your boat now? We can easily help you over the phone as you shop, look for financing, or complete your purchase.

QUALITY BOAT DEALERS NEAR YOU

TRACKER Boats are sold by a global network of quality independent boat dealers, and Bass Pro Shops and Cabela's Boat Centers. Each dealer is trusted to provide the best boat buying experience that exceeds customer expectations. Shop aluminum fishing boats for sale near you today.

A SMART BOAT BUY

More room, more features, more quality, but all for less money! TRACKER ensures we’re offering you the most boat for your money without cutting any corners.

BUILT-IN QUALITY CONSTRUCTION

The TRACKER team uses industry-leading processes, technology and materials to craft top-quality boats that will last a lifetime.

INDUSTRY LEADING WARRANTY

Day in, day out, year after year after year—you can boat easy knowing your TRACKER is backed by an industry-leading warranty through it all.

More Value. More Fishability. More Great Memories.

new for 2024

Super guide v-16 sc aluminum deep v.

All-NEW for the 2024 model year, The Super Guide V-16 SC is a nimble 16ft. side-console multi-species fishing boat. It's an all-welded aluminum deep v that is built to deliver you incredible value, peace-of-mind and even better memories while you're casting for walleye, smallmouth, and more! 

tracker learning center

Tracker boats are nmma certified

TRACKER owners can be assured their fishing boat has been built to the rigorous standards established by the U.S. Coast Guard and the American Boat & Yacht Council.

Protect Your Boat with a Cover

We offer a variety of top-quality covers across the lineup to protect you, your crew and your boat from the elements. Choose from mooring covers, Bimini tops and more!

Custom-Matched Trailers

Every TRACKER® Mod V, Deep V and GRIZZLY® model comes standard with a custom-fit trailer that is built to last as long as the boat it’s carrying.

FOLLOW US ON SOCIAL MEDIA

@trackerboats.

@ak_shadowtrooper

@nick_marsilio

For well qualified buyers.  Terms as of 2/9/24 for Tracker Classic XL with financed amount of $13,596 (purchase price of US $15,995 less 15% down payment (US $2,399)) and 8.09% APR for 144 months.  8.09% APR with approved credit.  Taxes, title, registration, additional options, accessories, or upgrades are not included.

America's #1 Selling Aluminum Fishing Boats

• Warranty Info
• Build Your Own
• Download Brochure

If you are using a screen reader and are having problems using this website, please call 1-800-227-7776 for assistance.

Posted 2024-03-20 13:08

Contact Information:

14 FT TRACKER ALUMINUM BOAT - $2,500 (deptford)

QR Code Link to This Post

post id: 7729079568

posted: 2024-03-20 13:08

♥ best of [ ? ]

refresh the page.

14 FT TRACKER ALUMINUM BOAT - boats - by owner - marine sale -...

14FT TRACKER VHUAL ALUMINUM BOAT 25HP MERCURY ENGINE NEWER TRAILER BRAND NEW FISH FINDER COMES WITH EVERYTHING YOU NEED

Posted 2024-03-20 10:34

Contact Information:

Crestliner 16' Alu Duck Hunter - $3,000 (Pittstown)

QR Code Link to This Post

post id: 7729012988

posted: 2024-03-20 10:34

♥ best of [ ? ]

refresh the page.

Crestliner 16' Alu Duck Hunter - boats - by owner - marine sale -...

1970 Crestliner 16' Aluminum Boat, with Trolling motor and 9.8hp Nissan Marine Boat (the right size for reservoir fishing/boating.) It also comes with an AVERY pop-up duck hunting blind. Has lights...

Townhouses sold by ‘King of Coconut Grove’ are up for sale. But problems haven’t been fixed

The never-inhabited Coconut Grove townhouses previously sold and double sold and triple sold at increasing prices to unsuspecting buyers by a developer accused of fraud are for sale. Again.

There’s a catch. Again. The houses, selling at twice their original prices from three to five years ago, do not have certificates of occupancy and nobody can move in until they do.

But the court-appointed receiver overseeing the tangled set of lawsuits against Doug Cox and his development companies wants to sell the houses “as is” to recoup money for home buyers, investors and lenders who paid Cox more than $40 million.

Receiver Alan Fine has asked Miami-Dade Circuit Court Judge Tom Rebull to allow the sale of 12 Grove townhouses on Coconut Avenue — priced at $2.7 to $3.3 million — despite code violations, liens and purchase contracts dating from 2018 to 2023. A hearing is scheduled Wednesday.

READ MORE: They bought their dream homes from the ‘King of Coconut Grove.’ They still can’t move in

Offers on homes

Fine has received offers on the listed houses. He wants to sell them “free and clear of liens and claims” in order to maximize their value and obtain title insurance so that “future prospective purchasers of those properties would be able to purchase reasonably free of the risk of becoming ensnared in the issues giving rise to this Receivership.”

Original buyers ensnared in those very issues since they signed contracts with Cox and put down deposits with his domestic and business partner Nicole Pearl object to Fine’s plan. They had hoped Fine would sit down with them and negotiate a discounted price for their long-awaited homes, but he never offered, they said, after he initially asked if they would be interested in purchasing the homes at current market rate, which they couldn’t afford.

Fine argues that his job is to marshal what’s left of Cox’s assets and pay Cox’s creditors as much as possible, which may only be 50 to 75 percent of what they paid. Because Fine and his forensic accountants have been unable to locate unaccounted-for millions — besides the $283 and negative $14 left in two of Cox’s bank accounts — Fine needs to sell Cox’s properties at the highest price he can get.

Original buyers are angry

“We are disappointed that Mr. Fine is acting like a real estate agent and treating the real victims like a nuisance,” said Michael Coyne, who paid a $487,500 deposit on his house when his wife Oksana was expecting twins. Over the course of nearly three years, while Cox kept postponing their closing date or going incommunicado, Coyne and his family — three children and his parents-in-law from Ukraine, have lived like nomads in six rentals. His company’s relocation to Miami was disrupted as was Oksana’s nursing career.

“After all that we’ve been through we have to learn from Zillow what’s happening with our houses that we still have contracts on. We honestly feel the receivership, costing $750-plus per hour, has accomplished nothing, and no one — not Doug and Nicole, not the city of Miami building department -- has been held accountable.”

Alan Lombardi, another original buyer, adopted newborn twins in 2020 and was looking forward to having a nursery for them in his and his partner’s new home. The twins are now 4 years old. The finished house he thought he was buying for $1.2 million with a $260,000 deposit has skyrocketed in value in one of the most desirable neighborhoods in the country. It’s still empty.

“Those houses are cursed. Who would want to buy it out from under us?” Lombardi said. “Greed took over and everyone forgot about the families who were planning their future. We’re not investors making a business transaction. We’re not loan companies collecting predatory interest. Yet we’re being treated the same as those creditors; we’re paying the same consequences as a lender or investor who failed to do their due diligence.”

“We’ve discovered justice is very expensive and very elusive,” said Lombardi, who has spent about $50,000 to hire a lawyer.

The original buyers say it’s ironic that the houses are again being sold without certificates of occupancy. That was the impediment Cox kept citing as he assured buyers he had a special relationship with the city’s inspectors — a couple more cafecitos with them and he would obtain the COs within a month, or two, or six.

He was allowed to work through a Stop Work order for a year, and he bragged about the campaign contributions he made to Miami Mayor Francis Suarez. He called himself the King of Coconut Grove.

Cox is facing multiple lawsuits but claims no wrongdoing, except for mismanagement. Buyers have complained to the police, state attorney’s office and FBI about Cox, alleging he stole their money by running a real estate Ponzi scheme, but he has not been charged with a crime.

Cox has repeatedly declined the Herald’s requests for an interview.

Building code issues

Code problems remain today but should be resolved soon, say Fine and real estate agent Toni Schrager. The glass railing along interior staircases is too narrow. Swimming pool wiring must be redone. And there are other issues, Fine said. Buyers may be offered a clause to cancel their contracts and get a refund of their deposits if COs are not ready in 120 days, according to a court filing.

“It’s been almost a year since the receiver was appointed and still no COs. That was supposed to take him 60 days,” said Kevin Ware, who put down a $433,750 deposit for a $1.7 million purchase price on a townhouse at 2992 Coconut Ave. in March 2021.

Fine hired real estate broker Vivian Dimond to analyze the properties, complete inspections and obtain COs. She has been paid $343,374.52 by Fine for fees and expenses to date.

“The case could have been handled in a different manner without all this wasted time and expense,” Ware said. “Do you really think they’d be eager to sell these if the market hadn’t doubled? What if the market had stagnated or gone down? They’d be coming to us waving contracts in our faces and telling us to close. I am ready, willing and able to close right now for my original price or a discounted market value price but the receiver hasn’t engaged us and that is a great shame.”

Buyer Alexandra Cardoso, who put down $155,000 and signed her contract for 2980 Coconut Ave. in 2018, said her house was listed without any notification from Fine. She asked him to remove it so she might have a chance to buy it herself -- rather, re-buy it. He replied that he would tell the agent to remove it, but it’s still listed, as “newly built,” although it was built four years ago, with 5 bedrooms and 4,046 square feet for $3.3 million.

“We thought the receiver would help us force Doug to complete the houses and get COs. We thought that was the democratic solution,” Cardoso said. “But the receiver’s goal is to get maximum dollars and we are the sacrificial lambs.”

Cardoso is looking for closure after years of agony dealing with Cox and the city.

“We had our contract reviewed by an attorney and it’s been eye-opening to learn it is not the ironclad legal document you thought it was and in the end you could be left with nothing,” she said. “Our contracts are rendered meaningless by the all-powerful receiver while we’ve heard he has four new contracts in hand. When do we get our day in court? What recourse does the average consumer have in these cases? Who is protecting the buyer and punishing the developer?”

Buyers who signed contracts with Cox in late 2022 and 2023 said he never disclosed they already had pending contracts on them. They put down $800,000 to as much as $1.5 million in deposits, which they allege went into Cox’s pockets.

The receivership has been paid $1 million since appointment in May 2023, but that has not covered all the fees and expenses incurred and continuing to incur, according to the reimbursement application Fine submits to Rebull each month. For February, he lists his bill as $36,235.00 at $750 per hour, his counsel Berger Singerman’s bill as $163,017.05, and his forensic accountant Kaufman Rossin’s bill as $30,491.35 for a total of $229,743.40.

Fine says he wants to sell the Coconut Avenue townhouses, plus two on Shipping Avenue and a single-family home on Park Avenue without delay. The receivership is short on cash, has not been able to acquire property insurance on the houses and is paying $5,000 per day in interest on a settlement involving Altamar Financial Group’s $33 million loan to Cox.

Buyers assert that if Fine and his accountants recovered at least some of the missing funds from Cox and Pearl, Fine would be able to afford honoring some contracts and selling the houses at lower prices.

“Nearly a year on this case with expert investigators being paid handsomely and the receiver has not figured out where a penny went,” Ware said. “I understand a lot of people have come out of the woodwork with claims, a lot of predatory lenders -- the sharks became the prey. But what have you done for the buyers who stuck their necks out to expose Cox? Where’s the money? Doug and Nicole are not sophisticated enough to pull off a big heist. This isn’t Oceans 11.”

Fine’s counsel, Paul Singerman, has said Cox and Pearl’s books were such a mess that it has been hard to find a money trail. The couple was taking out one high-interest loan to repay another, after another, after another, Singerman said, and it is plausible they ran through all the money.

“Our only hope is that Judge Rebull will look at this case from our point of view,” Lombardi said. “We want to keep fighting for what is fair.”

Linda Robertson

Get unlimited digital access.

Try 1 month for $1

Will Smith is in Miami filming ‘Bad Boys’ sequel. Then he stunned jazz festivalgoers

This famous Chinese restaurant is a New York icon. Now it’s open in Coconut Grove

Target plans three new stores in the Miami area in 2024. The first is in a central spot

Coconut Grove Playhouse revival plan critics lose in court again, vow to keep fighting

Why are Miami roads so jammed? How to navigate the boat show, arts fest and other events

A man was shot dead in Coconut Grove, Miami police say. Officers are on the lookout

Iconic 'little blue boat' that calls Montrose Bay home up for sale after family makes tough decision

For almost 50 years a little blue boat has been moored on the River Derwent in Hobart's northern suburbs by the side of a busy highway.

It is known affectionately by many Tasmanians as "the little blue boat", and has floated alone next to the Brooker Highway at Montrose Bay over the decades.

Sea Breeze, its official name, was built by Robin Attrill in his Montrose backyard in the early 1970s.

His son Colin Attrill said the boat was launched at Macquarie Wharf in 1976.

"It's been on the mooring in Montrose Bay ever since, and that's why it's such an iconic little blue boat," he said.

Tasmanians curious about 'little blue boat'

The boat is an object of fascination for Brooker Highway motorists and foreshore walkers due to it seemingly never moving.

Colin Attrill said it was "absolutely amazing" the number of people who would stop and talk to him about the boat when he was launching the dinghy to go and check on it.

"The number of people that talk to me that are walking past and go 'that boat has been there forever' and 'it was there when I was going to school or every day when I've been driving to work'," he said.

"Some people say they've never seen it move. Well it used to move all the time.

"Of late it's slowed up, we're all busy and dad has slowed up. We lost mum and once that happened it impacted on family activities."

Tough decision to sell

Its owner is now 91 and the boat has not been sailed for about 10 years.

Colin Attrill said the family had recently made the tough decision to try to sell the boat.

"Dad isn't well and he's gotten old, which we all do, and the boat's got old," he said.

"Anyone who knows about a timber boat knows that they need maintenance."

Mr Attrill said the family used to put the boat on the slip at least once a year to clean and antifoul it, and do any repairs.

"But the past few years Dad has been unable to do anything, and the boat unfortunately has just sat on the mooring," he said.

He said the family decided it was time for the boat to have a new owner.

"Nobody is using it, it needs a new owner who will give it the time and get the enjoyment out of it that we had growing up," he said.

"It's a great boat, and there are many years left. Wooden boats just last."

'Next phase' for the boat

The Attrill family is full of passionate sailors and Robin's brother Peter represented Australia in sailing at the Helsinki Olympics in 1952 — Tasmania's fifth Olympian and the first to represent the state in sailing.

When Robin finished building the 25-foot river cruiser, known by the family as The Breeze, it was used for trips away around Hobart.

"We used to have family trips down the channel, down to Cygnet, down to Dover, and all places in between fishing and weekends away," he said.

"We also used to go to events in Hobart like the Hobart Regatta, the Sandy Bay Regatta. We'd be down the river at any chance, or up the river. She made it to New Norfolk a couple of times.

"The boat was all over the place, wherever we could."

Mr Attrill said it would be a sad day when the boat left Montrose Bay after almost 50 years.

"We will see where it goes and where it ends up and what's the next phase for the boat," he said.

Over the years its owner has been keeping a watchful eye on it just a matter of metres away, across the Brooker Highway from his Montrose home of more than 70 years.

"He's always been there. He'd open the blinds in the morning in the kitchen and look out the window and there's the boat," son Colin said.

"It's always been a part of his life."

ABC Hobart in your inbox

• X (formerly Twitter)

Related Stories

Tony died just days after his first exhibition opened, but he left a legacy of laughter.

• Human Interest
• Travel and Tourism (Lifestyle and Leisure)