yacht mast parts

Open for Retail and OEM/Rigger Sales! Check out the updated Dwyer Mast catalog and order online today.

Aluminum Sailboat Mast & Boom Extrusion

• Navigating the High Seas: A Comprehensive Guide to Sailboat Masts

Sailboat masts are the unsung heroes of the sailing world, silently supporting the sails and ensuring a smooth journey across the open waters. Whether you're a seasoned sailor or a novice, understanding the intricacies of sailboat masts is essential for a safe and enjoyable voyage. In this comprehensive guide, we will delve into the world of sailboat masts, discussing their types, maintenance, and everything in between. 

Types of Sailboat Masts

Sailboat masts come in various configurations, each with its advantages and drawbacks. The two primary types are keel-stepped and deck-stepped masts.

Keel-Stepped Masts

Keel-stepped masts are the most common type, extending through the deck and resting on the boat's keel. They provide excellent stability and are suitable for larger sailboats. However, they require careful maintenance to prevent water intrusion into the boat's cabin.

Deck-Stepped Masts

Deck-stepped masts rest on the deck of the boat, making them easier to install and remove. They are commonly found on smaller sailboats and are more forgiving in terms of maintenance. However, they may offer slightly less stability than keel-stepped masts.

Components of a Sailboat Mast

To understand mast maintenance better, it's essential to know the various components of a sailboat mast. The key parts include the masthead, spreaders, shrouds, and halyard sheaves.

The masthead is the topmost section of the mast, where the halyards are attached to raise and lower the sails. It also often houses instruments such as wind indicators and lights.

Spreaders and Shrouds

Spreaders are horizontal supports attached to the mast to help maintain the proper angle of the shrouds (cables or rods that provide lateral support to the mast). Properly adjusted spreaders and shrouds are crucial for mast stability and sail performance.

Mast Materials: Choosing the Right One

Sailboat masts are typically constructed from three primary materials: aluminum, wood, and carbon fiber. Each material has its unique characteristics and is suited to different sailing preferences.

Aluminum Masts

Aluminum masts are lightweight, durable, and relatively easy to maintain. They are commonly used in modern sailboats due to their cost-effectiveness and longevity.

Wooden Masts

Wooden masts, while classic and beautiful, require more maintenance than other materials. They are best suited for traditional or vintage sailboats, where aesthetics outweigh convenience.

Carbon Fiber Masts

Carbon fiber masts are the pinnacle of mast technology. They are incredibly lightweight and strong, enhancing a sailboat's performance. However, they come at a premium price.

Mast Maintenance

Proper mast maintenance is essential for safety and longevity. Regular cleaning, inspection, and addressing minor issues promptly can prevent costly repairs down the line.

Cleaning and Inspection

Regularly clean your mast to remove salt, dirt, and grime. Inspect it for signs of corrosion, wear, or damage, paying close attention to the masthead, spreaders, and shrouds.

Common Repairs and Their Costs

Common mast repairs include fixing corroded areas, replacing damaged spreaders, or repairing shrouds. The cost of repairs can vary widely, depending on the extent of the damage and the materials used.

Extending the Lifespan of Your Mast

Taking steps to prevent damage is essential. Avoid over-tightening halyards, protect your mast from UV radiation, and keep an eye on corrosion-prone areas.

Read our top notch articles on topics such as sailing, sailing tips and destinations in our Magazine .

Check out our latest sailing content:

Sailing the Maldives: paradise

Interview: is ocean pollution irreversible?

How to gear up for the 2024 sailing season

Where and why to sail from Lefkas marina

Don’t panic: handling maritime emergencies

The best sailing routes from Biograd na Moru

Yachting Away from Ourselves: A Voyage to Inner Peace

Sail to the 7 most beautiful sights in Greece

What skipper's licence do I need?

From Lefkada or Corfu to Paxos and Antipaxos

Discover the paradise of Paxos and Antipaxoss

Discover Corfu: sailing adventure in the Ionian

Sextant and navigation: survival without GPS

5 best sailing routes in the Bahamas

Yachting guide to the Bahamas

The ultimate yacht cleaning kit

Introduction to chartering with a skipper

Traditional sailor tattoos: Meaning of the swallow

The most popular catamarans of 2023

Fishing and sailing: where to sail for the best catches?

Lighthouses you won't forget

New Year's resolution: let's sail more eco

British Virgin Islands: sailing paradise

How to get kids to enjoy sailing?

How to sail a yacht on a tailwind

How to sail a yacht in crosswinds

Götheborg: the greatest sailing ship

How to have a nautical Christmas

What to pack for a tropical sailing

How to sail a yacht against the wind

Stepping and Unstepping a Mast

Stepping and unstepping a mast is a crucial skill for any sailboat owner. This process involves removing or installing the mast on your boat. Here's a step-by-step guide for safe mast handling.

Step-by-Step Guide for Safe Mast Handling

• Gather the necessary tools and equipment.
• Disconnect all electrical and rigging connections.
• Use a crane or mast-stepping system to safely lower or raise the mast.
• Secure the mast in its proper place.
• Reconnect all electrical and rigging connections.

When and Why to Unstep a Mast

You may need to unstep your mast for various reasons, such as transporting your sailboat or performing extensive maintenance. It's crucial to follow the manufacturer's recommendations and ensure a safe unstepping process.

Sailboat Mast Boot: Protecting Your Mast

A mast boot is a simple yet effective way to protect your mast from water intrusion and damage caused by the elements. Here's what you need to know.

The Purpose of a Mast Boot

A mast boot is a flexible material that wraps around the mast at the deck level. It prevents water from entering the cabin through the mast opening, keeping your boat dry and comfortable.

Installing and Maintaining a Mast Boot

Installing a mast boot is a straightforward DIY task. Regularly inspect and replace it if you notice any signs of wear or damage.

Replacing a Sailboat Mast

Despite your best efforts in maintenance, there may come a time when you need to replace your sailboat mast. Here's what you should consider.

Signs That Your Mast Needs Replacement

Common signs include severe corrosion, structural damage, or fatigue cracks. If your mast is beyond repair, it's essential to invest in a replacement promptly.

The Cost of Mast Replacement

The cost of mast replacement can vary significantly depending on the type of mast, materials, and additional rigging needed. It's advisable to obtain multiple quotes from reputable marine professionals.

Yacht Masts: Sailing in Style

For those looking to take their sailing experience to the next level, upgrading to a yacht mast can be a game-changer.

Differences Between Sailboat and Yacht Masts

Yacht masts are typically taller and offer enhanced sail performance. They are often equipped with advanced rigging systems and technology for a more luxurious sailing experience.

Upgrading to a Yacht Mast

Consult with a marine professional to determine if upgrading to a yacht mast is feasible for your sailboat. It can be a significant investment but can transform your sailing adventures.

Sailboat Mast Steps: Climbing to the Top

Mast steps are handy additions to your mast, allowing easier access to perform maintenance or enjoy panoramic views. Here's how to use them safely.

Using Mast Steps Safely

Always use proper safety equipment when climbing mast steps. Make sure they are securely attached to the mast and regularly inspect them for wear or damage.

The Advantages of Mast Steps

Mast steps provide convenience and accessibility, making sailboat maintenance tasks more manageable. They also offer an elevated vantage point for breathtaking views while at anchor.

Mast Maintenance Tips for Beginners

If you're new to sailboat ownership, these mast maintenance tips will help you get started on the right foot.

Essential Care for First-Time Sailboat Owners

• Establish a regular maintenance schedule.
• Seek advice from experienced sailors.
• Invest in quality cleaning and maintenance products.

Preventing Common Mistakes

Avoid common pitfalls, such as neglecting inspections or using harsh cleaning agents that can damage your mast's finish.

Sailing with a Mast in Top Condition

A well-maintained mast contributes to a safer and more enjoyable sailing experience. It enhances your boat's performance and ensures you can rely on it in various weather conditions.

How a Well-Maintained Mast Improves Performance

A properly maintained mast helps maintain sail shape, reducing drag and improving speed. It also ensures that your rigging remains strong and secure.

Safety Considerations

Never compromise on safety. Regularly inspect your mast, rigging, and all associated components to prevent accidents while at sea.

Sailboat masts are the backbone of any sailing adventure, and understanding their intricacies is crucial for a successful voyage. From choosing the right mast material to proper maintenance and upgrading options, this guide has covered it all. By following these guidelines, you can sail the high seas with confidence, knowing that your mast is in top condition.

So what are you waiting for? Take a look at our range of charter boats and head to some of our favourite  sailing destinations.

I am ready to help you with booking a boat for your dream vacation. Contact me.

Denisa Nguyenová

• VAT (Inc.) VAT (Ex.)
• Returns Information
• Spars & Rigging
• Masts & Parts

Mast Fittings

We stock a wide range of mast fittings and accessories from some of the top marine manufacturers such as Allen, Selden, Barton, RWO, Spinlock and Ronstan. Our comprehensive range includes halyard fittings, kicker fittings, sail feeders, spinnaker launchers, shroud, forestay and mast fittings and much, much more. If you cannot see the item you require or you'd like some technical advice, please give us a call on 01604 592808 or send us an email at [email protected]

• Your Selection
• No Selection
• Type: Spars & Rigging   X
• Type: Masts & Parts   X
• Mast Head Fittings
• Shroud & Forestay Fittings
• Halyard Boxes & Sheaves
• Spinnaker Launchers & Pole Rings
• Spreaders & Fittings
• Halyard Locks & Tooth Racks
• Sail Track & Feeders
• Kicker Tangs and Brackets
• Heel Fittings
• Miscellaneous Mast Parts
• Super Spars
• British Moth
• Flying Dutchman
• Flying Fifteen
• International 14
• Laser / ILCA
• Merlin Rocket
• National 12
• National 18
• Yachting World Day Boat
• Spirro Fittings
• Replacement Sheave
• Glass / Carbon
• £75 to £100
• £100 to £200
• £200 to £300
• £300 to £400
• £400 to £500
• £500 to £1000
• £1000 to £2000
• £2000 to £3000
• £3000 to £4000
• £4000 to £5000
• Price Low-High
• Price High-Low
• Most Recent

• Results Per Page

U.S. Spars --->

U.S. Spars is your source for Z-Spars for Masts, Booms, Rigging, and all associated hardware

“ Sailing starts with U.S. Spars”

U.S. Spars is part of Z-Spars Group in France, the World’s Largest Spar Builders. Z-Spars has been supplying the sailing world with quality products since 1973. US Spars supplies quality brands like Hunter, Beneteau, Com-Pac and Performance Cruising. We would be happy to quote your mast, boom, and rigging needs.

US Spars takes pride in excellent customer service for Business or Individual customers. Please take advantage of our online ordering and fast shipping for all of your small part needs using our easy to use boat look-up to find your boat model and view a diagram with part numbers for easy ordering. For quotes on special orders please use our easy to use quote page for a speedy response.

U.S. Spars looks forward to getting you back on the water!

Questions? – send us an email at  [email protected]  or  [email protected]

Comments are closed.

• Shopping Cart
• Quote Request
• Pipe Bending
• Product Support
• Digital Tension Gauge
• Promtional Items
• Hayn Rigging

Find the parts for your Boat Model Here

• Sparring Partners
• Help Wanted

• 01473 822130
• [email protected]
• Mon - Thurs/Fri: 8:00 - 16:30/16:00

Mast & Rigging Manufacturer

Z Spars UK is a leading manufacturer of alloy masts, booms, rigging, spars and fittings for sailing yachts around the world. With a combined 200+ years of experience within the yachting industry, we have extensive knowledge about sailing vessels and their specifications.

Are you looking for... Reliable service Fast delivery High Quality  Think Z SPARS UK

If you would like to visit our office to discuss your needs, please contact us to book an appointment., phone: 01473 822130, email: [email protected], mon-thur 08:00 - 16:30, fri 08:00 - 16:00, fill out our enquiry form here, download our full brochure.

FINEST CARBON MASTS

A mast is one of the most dynamic and complex components of a yacht, with the job of transferring the power generated by the wind and sails into the yacht. It must withstand a multitude of ever-changing forces, including torsion, bend and compression. Yet it must maintain the perfect combination of stiffness and flexibility to maximize performance of the sail plan.

At Southern Spars we are spurred on by two key drivers; performance and reliability. The foundations of our success in these areas are sound principles of design and manufacture, combined with a detailed understanding of our customers’ requirements.

At Southern Spars, we build packages for everything from mega yachts, to race yachts and Olympic dinghies. Developments made in one area are disseminated through all of our teams, meaning the rate of progression throughout the company is extremely high.

WE BUILD MASTS FOR…

Grand prix / racing, classic cruiser.

Phenomenal strength is needed in the mast and  rigging  to support a superyacht’s immense sail plan. The yacht’s dimensions must be balanced with the mast and boom for both aesthetics and engineering capabilities. Modern superyacht spars have added functionality like furling mainsails, and rafts of electronic, navigation and communications components.

As superyacht owners seek ever-larger and more performance-oriented yachts,  designs  draw extensively on developments made in the Grand Prix arena. Southern Spars’  ECsix continuous carbon fibre rigging  is now used in most superyacht projects.  Thin ply carbon fibre  for mast construction is also beginning to cross over the race/luxury boundary.

The many international design awards won by superyachts carrying Southern Spars’ packages highlights the vital role that our team plays in creating world-leading superyachts.

With almost universal domination of the world’s elite inshore, offshore and around the world events; Southern Spars’ race results speak for themselves.

Our dedication to performance and  reliability  makes us the obvious choice for racing yachts that want the edge over their competitors with a product that they can trust. Throughout the  design process , we integrate the sail maker’s design into our own so that the spars and sails work as one cohesive unit. This enables racers to extract maximum performance and trust that the mast will get them across the finish line.

Southern Spars rigs are made from  thin ply carbon fibre , which allows us to  design  tubes lighter and stronger than our competition, while achieving a more accurate bend profile.

The spirit of multihull yachts is generally more radical, not conforming to the limits imposed on monohulls. Catamarans and trimarans often seek something different and more exciting – a spirit embraced by Southern Spars.

Multihulls allow many different rig and  rigging  configurations, which allows Southern Spars to  design  innovative and often unique solutions to aid the yacht’s performance.

We work together with the yacht’s designer and sailmaker to ensure the whole yacht works together to embody the essence of multihull sailing – the perfect combination of comfort, space and effortless speed.

Southern Spars’  carbon technology  allows us to build more than just masts. We produce many of the carbon components in a multihull including the crossbeams, spine, and bowsprit for everything from foiling AC72s to multihull superyachts.

One of the best ways to bring new life to an older vessel is to upgrade the spar package. Doing so will significantly increase its performance, safety and  ease of operation  making sailing more enjoyable and therefore done more often.

Classic yachts are great to look at, but can be difficult to sail. Upgrading to a carbon mast from Southern Spars will make an older yacht sail like new one, with a more efficient sail plan and improved righting moment. Southern Spars’ attention to detail, from  design  through  manufacture  to paint and final fit out mean that all of this can be done without compromising any of the cosmetic attributes or traditional feel of your yacht.

Southern Spars have built new carbon fibre masts for single, double and triple masted classic yachts, cutting significant amounts of weight and  improving the reliability  of a rig package.

~ Back to MetalMast Spars Main Page ~

~ Back to Spars Main Page ~

• TECHNICAL SUPPORT

LEADERS IN EVERY DETAIL

Every Seldén rig is carefully thought out, down to the last detail. All the way from the materials and functions of the different parts of the rig, to dimensioning the right rig for each individual boat. Each component contributes to the performance of the whole rig. That is the Seldén way – experienced yachtsmen behind every aspect of design, product development and production.

CONVENTIONAL MASTS FOR YACHTS

Spareparts and aftermarket service

Since 1992 we have engraved a unique code into the mast section. We call it the mast ID number and you find it at the lower end of the aluminium section. This number tells us when your mast was built and what parts were used all the way down to nuts and bolts. The mast ID number includes the designation of your mast section which enables you to find part numbers in our catalogues and sparepart lists, all to be found under Technical Support. A corresponding number is to be found in the forward lower end of your boom. Best of all – take a close look at the components on your mast and you will find part numbers on them. Can it be simpler? Complete rigs and spareparts are sold by our World wide network of independent rigging companies.

Our conventional masts for 26-80 feet yachts are divided in two categories. The longitudinal oriented sections and the lateral oriented. Which one we select depends on the chain plate locations of the boat and number of spreaders.

LONGITUDINAL MAST SECTION

These sections are used for rig configurations with in-line spreaders or moderate spreader angles. The relationship between the length / width is 1,9 in order to create longitudinal stiffness allowing higher forestay load tensioning the backstay. Running backstays can often be avoided and the risk of mast pumping is also reduced. These rigs normally come with multiple pairs of spreaders and they are designed for the popular MDS sliders (Multi Directional Support).

LATERAL MAST SECTION

For rigs with large spreader angles, lateral stiffness is of higher importance than longitudinal stiffness. This is the result of a large spreader angle creating longitudinal stability, whereas the lateral stability is achieved by the geometry of the mast section. This makes for a mast section which is wider and rounder than the corresponding longitudinal section and therefore the number of spreaders can be reduced. These sections are popular for upgrading a boat from the 1970-90’s with a traditional style single spreader rig, but still with all the benefits of modern functions such as the Inner Wheel Sliders (IWS).

WHAT IS A KEELBOAT?

Seldén’s definition of a ”keelboat” is a boat sized in between a dinghy and a yacht, with a length of approximately 18-28’. These boats often have a 50% ballast ratio. Consequently, the weight of the keel represents half of the total displacement.

Tradition and development

Seldén’s seven aluminium keelboat sections feature a wealth of sophisticated and functional solutions, originating from the dinghy range and the yacht range. The sections are extruded and anodized and they are all available with a tapered top as an option. Let us design your keelboat rig or ask us for our One-design solutions.

• Keelboat masts

FURLING MASTS

A seldén furling mast lets you operate your mainsal from the cockpit. simple and convenient.

Its unique features for reducing friction and initial sail resistance make furling and reefing child’s play. And it also makes sailing safer and far easier for you and your crew. With a powered furling mast and a powered Furlex jib furler it is even easier to set, reef and handle your sails. You can work your sails single handed, without leaving the helm. Powered systems are available for yachts ranging from 35 to 70 feet.

MORE ENJOYABLE

Due to the easy handling, with a furling mast you will do more sailing and less motoring.

A Seldén furling mast makes it easy to unroll and set your mainsail. Rolling it in is just as quick and easy. As your sail is neatly stowed out of the way the instant it is rolled in, you have a clear view when manoeuvring under power.

You can set your sail to suit the weather conditions, from the safety of the cockpit.

By furling the sail vertically into the mast, you don’t have to furl very much to get a substantial decrease of the sail area.

You hoist the sail just once a season, so a small crew can manage a much larger boat.

WELL BALANCED

There are no fixed reef points, so the number of combinations between furling genoa and main are unlimited.

THE SELDÉN FURLING PRINCIPLE

The wide sail slot allows for vertical battens and a positive roach of the main sail and the sailgroove on the luff extrusion is located asymmetrically to help the sail furl easily around the extrusion.

The furling system is based on Seldén’s proven technology. Geared line driver winch, tensioned luff extrusion and the patented load distributor of the halyard swivel. All to make furling an easy and fast operation. The Seldén furling masts come with twin cable conduits, enabling the cables to run freely and well protected from all running rigging. The cable conduits also facilitate cable replacement.

EASY TO OPERATE

There is an outhaul line for rolling out the sail, and an endless line for rolling it in. It’s simple as it sounds. Or if you wish, you can operate the sail at the mast using a winch handle. The geared reefing winch mechanism runs on ball bearings, so it takes little effort to roll in the sail. Greasing holes in the mast facilitate maintenance.

Two oval holes on the port side of the mast allow for easy access to the tack attachment, sail fees, tensioning screw and halyard swivel. Just remove the composite covers and the rest speaks for itself. You can inspect the halyard swivel and carry out annual maintenance through the upper access hole.

ABSORBS ALL SAIL FORCES

The outhaul cars are fitted with horizontal and vertical wheels, enabling them to absorb forces from every direction.

TURNING BLOCK FOR CONTROL LINES

Turning blocks at the base of the mast are designed to enable the ready-spliced, endless line to be easily threaded into position. Seldén deck blocks have the same feature.

LOW FRICTION

The sail groove on the luff extrusion is located asymmetrically to help the sail furl easily around the extrusion. In addition, the rotating luff extrusion is tensioned and fitted with ball bearings top and bottom. This reduces friction between the sail and the inside of the sail compartment.

UPGRADE YOUR MAST TO ELECTRIC DRIVE

To make sail handling easier for a small crew we have synchronized an electric motor in the mast with a newly developed electric winch for the outhaul, E40i. Push a button and the sail comes out in a controlled fashion as the winch adjusts the outhaul tension in relation to the motor in the mast.  This is what we call Synchronized Main Furling.

IN-MAST FURLING MOTOR

Converting a manually operated furling mast is quite easy. Basically, the vertical shaft in the original line driver is replaced for a longer version which is connected to the motor. A clutch allows the motor to be disconnected for manual operation, if ever needed. The motor is completely integrated in the mast and connected to the Seldén Power Supply and SEL-Bus system. The motor can be retrofitted to Seldén furling masts type RB (~36-43’ yachts).

How to upgrade a furling mast to electric drive

PUSH BUTTONS

Push the ”OUT” button and the sail will start to unfurl. The E40i winch will tension up the outhaul while the mast motor feeds out the sail. The speed is increased when the ”IN” button is pushed in addition to ”OUT”. To reef, just release the outhaul from the winch and push ”IN”.

E40i ELECTRIC WINCH

The E40i winch is built up around an electric motor which is totally integrated in the drum. Only three thin cables are protruding to lead through the coach roof or the deck, no large cutouts and no external motor or gearbox. This makes for uncompromised headroom down below which is normally not the case with electric winches. The three speed operation provides a high speed gear, a moderate gear and a low speed gear for fine tuning. It is a two finger operation to start the winch and to swich gear, so a single-handed sailor can helm while adjusting the trim.

HOW IT’S CONNECTED

• Upgrade your mast to electric drive

Seldén Carbon fibre masts – the perfect mix of Craftsmanship and modern production Technology

FOR EVERYONE THAT CANNOT RESIST SPEED

Carbon composite combines stiffness and strength with low weight. Seldén low-weight carbon spars have accentuated longitudinal stiffness. This means that forestay tension can be substantially increased. All experienced racing sailors know what this means in terms of increased upwind performance. The combination of greater stiffness and reduced weight will bring you beyond the speed limits.

MANDREL FILAMENT MOULDING

Our carbon spars are designed using the latest finite element analysis backed by many years of solid engineering experience.

Our unique production method gives a unique look. We call it Mandrel Filament Moulding (MFM). The process is fully automated and computer controlled for ultimate accuracy, repeatability, efficiency and that stunning ‘Viper’ pattern.

Seldén produce over 400 carbon masts per year as well as booms, poles and bow sprits for boats including high performance skiffs, racing keelboats, IRC race boats and some of the world’s most prestigious cruising yachts. With more sailors choosing Seldén carbon spars, the pattern is obvious.

• Carbon spars
• Carbon masts

SELDÉN DINGHY RIGS – GOING FOR GOLD

SELDÉN PROFILES

Working hand-in-hand with the world’s top dinghy sailors, carefully analysing their input and feedback, enables us to produce the ultimate Seldén dinghy rig for every boat. Ever since Seldén acquired Proctor in 1997, we have improved and developed the already acknowledged excellence of the Proctor products, so that they are now, like all other Seldén products, the best of the best. Our innovative design, attention to detail, advanced testing and manufacturing have won Seldén the trust of dinghy sailors all over the world and has contributed to numerous Championship medals.

• Dinghy masts
• Class reference guide

SELDÉN DINGHY CARBON RIGS

– the Mast you buy will perform as well for you as it will for a World Champion Sailor!

IN-HOUSE SPECIALIST DESIGN TEAM

Seldén has the design expertise and software to enable us to create a mast to meet exacting performance require­­ments. During the design process the position and alignment of each fibre is precisely calculated so as to meet the required bend characteristics. This detailed design is then used to program and control our filament winding equipment.

The combination of meticulous care, long experience, and exact specifications enable us to achieve optimum performance for minimum weight.

Computer controlled laminate lay-up Carbon filaments are wound around a mandrel (male mould), under controlled tension, via a designated winding program supplied by the design team.

FILAMENT WINDING, a computer-controlled process (CNC), guarantees consistent and accurate filament fibre orientation from spar to spar. Carbon filaments can be laid from 0° (uni-directional) to leave 89° (hoops) and at all angles between to produce a wide range of bend characteristic requirements. This accurate alignment of composite filaments is vital to the performance character­istics of a carbon spar. Fibres are laid under tension, which means that we can make the most efficient material choice and supply the lightest spars on the market.

This process gives a Seldén spar a level of tube consistency unattainable via any other composite manufacturing technique. Hence, the mast you buy will perform as well for you as it will for a world champion sailor!

USE OF PRE-PREG CARBON

Only the highest grade pre-preg tows of T700 or TZ carbon fibre are used to give sailors the best stiffness-to-weight spar. This, in combination with our filament winding process, enables the highest fibre-to-resin content pre-preg to be used.

The aerospace grade pre-preg has a UV stabiliser in the resin system to give the spars a guaranteed long life, even in the sunniest of climates. More fibres and less resin, mean lighter, stiffer masts.

AUTOCLAVE CURED

The consolidation of the material to form a ready-to-assemble carbon tube is completed in our in-house 20-metre long autoclave. The combination of heat and pressure to cure the resin and consolidate the pre-preg material ensures a strong and consistent final product.

• General conditions of sale >
• Product recalls >

Cookies  |  Legal and Privacy  | Copyright © 2024

This site uses cookies

Read more about cookies .

Sailboat Parts Explained: Illustrated Guide (with Diagrams)

When you first get into sailing, there are a lot of sailboat parts to learn. Scouting for a good guide to all the parts, I couldn't find any, so I wrote one myself.

Below, I'll go over each different sailboat part. And I mean each and every one of them. I'll walk you through them one by one, and explain each part's function. I've also made sure to add good illustrations and clear diagrams.

This article is a great reference for beginners and experienced sailors alike. It's a great starting point, but also a great reference manual. Let's kick off with a quick general overview of the different sailboat parts.

General Overview

The different segments

You can divide up a sailboat in four general segments. These segments are arbitrary (I made them up) but it will help us to understand the parts more quickly. Some are super straightforward and some have a bit more ninja names.

Something like that. You can see the different segments highlighted in this diagram below:

The hull is what most people would consider 'the boat'. It's the part that provides buoyancy and carries everything else: sails, masts, rigging, and so on. Without the hull, there would be no boat. The hull can be divided into different parts: deck, keel, cabin, waterline, bilge, bow, stern, rudder, and many more.

I'll show you those specific parts later on. First, let's move on to the mast.

Sailboats Explained

The mast is the long, standing pole holding the sails. It is typically placed just off-center of a sailboat (a little bit to the front) and gives the sailboat its characteristic shape. The mast is crucial for any sailboat: without a mast, any sailboat would become just a regular boat.

I think this segment speaks mostly for itself. Most modern sailboats you see will have two sails up, but they can carry a variety of other specialty sails. And there are all kinds of sail plans out there, which determine the amount and shape of sails that are used.

The Rigging

This is probably the most complex category of all of them.

Rigging is the means with which the sails are attached to the mast. The rigging consists of all kinds of lines, cables, spars, and hardware. It's the segment with the most different parts.

The most important parts

If you learn anything from this article, here are the most important parts of any sailboat. You will find all of these parts in some shape or form on almost any sailboat.

Okay, we now have a good starting point and a good basic understanding of the different sailboat parts. It's time for the good stuff. We're going to dive into each segment in detail.

Below, I'll go over them one by one, pointing out its different parts on a diagram, listing them with a brief explanation, and showing you examples as well.

After reading this article, you'll recognize every single sailboat part and know them by name. And if you forget one, you're free to look it up in this guide.

On this page:

The hull is the heart of the boat. It's what carries everything: the mast, the sails, the rigging, the passengers. The hull is what provides the sailboat with its buoyancy, allowing it to stay afloat.

Sailboats mostly use displacement hulls, which is a shape that displaces water when moving through it. They are generally very round and use buoyancy to support its own weight. These two characteristics make sure it is a smooth ride.

There are different hull shapes that work and handle differently. If you want to learn more about them, here's the Illustrated Guide to Boat Hull Types (with 11 Examples ). But for now, all we need to know is that the hull is the rounded, floating part of any sailboat.

Instead of simply calling the different sides of a hull front, back, left and right , we use different names in sailing. Let's take a look at them.

The bow is the front part of the hull. It's simply the nautical word for 'front'. It's the pointy bit that cuts through the water. The shape of the bow determines partially how the boat handles.

The stern is the back part of the hull. It's simply the nautical word for 'back'. The shape of the stern partially determines the stability and speed of the boat. With motorboats, the stern lies deep inside the water, and the hull is flatter aft. Aft also means back. This allows it to plane, increasing the hull speed. For sailboats, stability is much more important, so the hull is rounded throughout, increasing its buoyancy and hydrodynamic properties.

The transom is the backplate of the boat's hull. It's the most aft (rear) part of the boat.

Port is the left side of a sailboat.

Starboard is the right side of a sailboat

The bilges are the part where the bottom and the sides of the hull meet. On sailboats, these are typically very round, which helps with hydrodynamics. On powerboats, they tend to have an angle.

The waterline is the point where the boat's hull meets the water. Generally, boat owners paint the waterline and use antifouling paint below it, to protect it from marine growth.

The deck is the top part of the boat's hull. In a way, it's the cap of the boat, and it holds the deck hardware and rigging.

Displacement hulls are very round and smooth, which makes them very efficient and comfortable. But it also makes them very easy to capsize: think of a canoe, for example.

The keel is a large fin that offsets the tendency to capsize by providing counterbalance. Typically, the keel carries ballast in the tip, creating a counterweight to the wind's force on the sails.

The rudder is the horizontal plate at the back of the boat that is used to steer by setting a course and maintaining it. It is connected to the helm or tiller.

Tiller or Helm

• The helm is simply the nautical term for the wheel.
• The tiller is simply the nautical term for the steering stick.

The tiller or helm is attached to the rudder and is used to steer the boat. Most smaller sailboats (below 30') have a tiller, most larger sailboats use a helm. Large ocean-going vessels tend to have two helms.

The cockpit is the recessed part in the deck where the helmsman sits or stands. It tends to have some benches. It houses the outside navigation and systems interfaces, like the compass, chartplotter, and so on. It also houses the mainsheet traveler and winches for the jib. Most boats are set up so that the entire vessel can be operated from the cockpit (hence the name). More on those different parts later.

Most larger boats have some sort of roofed part, which is called the cabin. The cabin is used as a shelter, and on cruising sailboats you'll find the galley for cooking, a bed, bath room, and so on.

The mast is the pole on a sailboat that holds the sails. Sailboats can have one or multiple masts, depending on the mast configuration. Most sailboats have only one or two masts. Three masts or more is less common.

The boom is the horizontal pole on the mast, that holds the mainsail in place.

The sails seem simple, but actually consist of many moving parts. The parts I list below work for most modern sailboats - I mean 90% of them. However, there are all sorts of specialty sails that are not included here, to keep things concise.

The mainsail is the largest sail on the largest mast. Most sailboats use a sloop rigging (just one mast with one bermuda mainsail). In that case, the main is easy to recognize. With other rig types, it gets more difficult, since there can be multiple tall masts and large sails.

If you want to take a look at the different sail plans and rig types that are out there, I suggest reading my previous guide on how to recognize any sailboat here (opens in new tab).

Sail sides:

• Leech - Leech is the name for the back side of the sail, running from the top to the bottom.
• Luff - Luff is the name for the front side of the sail, running from the top to the bottom.
• Foot - Foot is the name for the lower side of the sail, where it meets the boom.

Sail corners:

• Clew - The clew is the lower aft (back) corner of the mainsail, where the leech is connected to the foot. The clew is attached to the boom.
• Tack - The tack is the lower front corner of the mainsail
• Head - The head is the top corner of the mainsail

Battens are horizontal sail reinforcers that flatten and stiffen the sail.

Telltales are small strings that show you whether your sail trim is correct. You'll find telltales on both your jib and mainsail.

The jib is the standard sized headsail on a Bermuda Sloop rig (which is the sail plan most modern sailboats use).

As I mentioned: there are all kinds, types, and shapes of sails. For an overview of the most common sail types, check out my Guide on Sail Types here (with photos).

The rigging is what is used to attach your sails and mast to your boat. Rigging, in other words, mostly consists of all kinds of lines. Lines are just another word for ropes. Come to think of it, sailors really find all kinds of ways to complicate the word rope ...

Two types of rigging

There are two types of rigging: running and standing rigging. The difference between the two is very simple.

• The running rigging is the rigging on a sailboat that's used to operate the sails. For example, the halyard, which is used to lower and heave the mainsail.
• The standing rigging is the rigging that is used to support the mast and sail plan.

Standing Rigging

Here are the different parts that belong to the standing rigging:

• Forestay or Headstay - Line or cable that supports the mast and is attached to the bow of the boat. This is often a steel cable.
• Backstay - Line or cable that supports the mast and is attached to the stern of the boat. This is often a steel cable.
• Sidestay or Shroud - Line or cable that supports the mast from the sides of the boat. Most sailboats use at least two sidestays (one on each side).
• Spreader - The sidestays are spaced to steer clear from the mast using spreaders.

Running Rigging: different words for rope

Ropes play a big part in sailing, and especially in control over the sails. In sailboat jargon, we call ropes 'lines'. But there are some lines with a specific function that have a different name. I think this makes it easier to communicate with your crew: you don't have to define which line you mean. Instead, you simply shout 'mainsheet!'. Yeah, that works.

Running rigging consists of the lines, sheets, and hardware that are used to control, raise, lower, shape and manipulate the sails on a sailboat. Rigging varies for different rig types, but since most sailboats are use a sloop rig, nearly all sailboats use the following running rigging:

• Halyards -'Halyard' is simply the nautical name for lines or ropes that are used to raise and lower the mainsail. The halyard is attached to the top of the mainsail sheet, or the gaffer, which is a top spar that attaches to the mainsail. You'll find halyards on both the mainsail and jib.
• Sheets - 'Sheet' is simply the nautical term for lines or ropes that are used to set the angle of the sail.
• Mainsheet - The line, or sheet, that is used to set the angle of the mainsail. The mainsheet is attached to the Mainsheet traveler. More on that under hardware.
• Jib Sheet - The jib mostly comes with two sheets: one on each side of the mast. This prevents you from having to loosen your sheet, throwing it around the other side of the mast, and tightening it. The jib sheets are often controlled using winches (more on that under hardware).
• Cleats are small on-deck hooks that can be used to tie down sheets and lines after trimming them.
• Reefing lines - Lines that run through the mainsail, used to put a reef in the main.
• The Boom Topping Lift is a line that is attached to the aft (back) end of the boom and runs to the top of the mast. It supports the boom whenever you take down the mainsail.
• The Boom Vang is a line that places downward tension on the boom.

There are some more tensioning lines, but I'll leave them for now. I could probably do an entire guide on the different sheets on a sailboat. Who knows, perhaps I'll write it.

This is a new segment, that I didn't mention before. It's a bit of an odd duck, so I threw all sorts of stuff into this category. But they are just as important as all the other parts. Your hardware consists of cleats, winches, traveler and so on. If you don't know what all of this means, no worries: neither did I. Below, you'll find a complete overview of the different parts.

Deck Hardware

Just a brief mention of the different deck hardware parts:

• Pulpits are fenced platforms on the sailboat's stern and bow, which is why they are called the bow pulpit and stern pulpit here. They typically have a solid steel framing for safety.
• Stanchons are the standing poles supporting the lifeline , which combined for a sort of fencing around the sailboat's deck. On most sailboats, steel and steel cables are used for the stanchons and lifelines.

Mainsheet Traveler

The mainsheet traveler is a rail in the cockpit that is used to control the mainsheet. It helps to lock the mainsheet in place, fixing the mainsails angle to the wind.

If you're interested in learning more about how to use the mainsheet traveler, Matej has written a great list of tips for using your mainsheet traveler the right way . It's a good starting point for beginners.

Winches are mechanical or electronic spools that are used to easily trim lines and sheets. Most sailboats use winches to control the jib sheets. Modern large sailing yachts use electronic winches for nearly all lines. This makes it incredibly easy to trim your lines.

You'll find the compass typically in the cockpit. It's the most old-skool navigation tool out there, but I'm convinced it's also one of the most reliable. In any way, it definitely is the most solid backup navigator you can get for the money.

Want to learn how to use a compass quickly and reliably? It's easy. Just read my step-by-step beginner guide on How To Use a Compass (opens in new tab .

Chartplotter

Most sailboats nowadays use, besides a compass and a map, a chartplotter. Chartplotters are GPS devices that show a map and a course. It's very similar to your normal car navigation.

Outboard motor

Most sailboats have some sort of motor to help out when there's just the slightest breeze. These engines aren't very big or powerful, and most sailboats up to 32' use an outboard motor. You'll find these at the back of the boat.

Most sailboats carry 1 - 3 anchors: one bow anchor (the main one) and two stern anchors. The last two are optional and are mostly used by bluewater cruisers.

I hope this was helpful, and that you've gained a good understanding of the different parts involved in sailing. I wanted to write a good walk-through instead of overwhelming you with lists and lists of nautical terms. I hope I've succeeded. If so, I appreciate any comments and tips below.

I've tried to be as comprehensive as possible, without getting into the real nitty gritty. That would make for a gigantic article. However, if you feel I've left something out that really should be in here, please let me know in the comments below, so I can update the article.

I own a small 20 foot yacht called a Red witch made locally back in the 70s here in Western Australia i found your article great and enjoyed reading it i know it will be a great help for me in my future leaning to sail regards John.

David Gardner

İ think this is a good explanation of the difference between a ”rope” and a ”line”:

Rope is unemployed cordage. In other words, when it is in a coil and has not been assigned a job, it is just a rope.

On the other hand, when you prepare a rope for a specific task, it becomes employed and is a line. The line is labeled by the job it performs; for example, anchor line, dock line, fender line, etc.

Hey Mr. Buckles

I am taking on new crew to race with me on my Flying Scot (19ft dingy). I find your Sailboat Parts Explained to be clear and concise. I believe it will help my new crew learn the language that we use on the boat quickly without being overwhelmed.

PS: my grandparents were from Friesland and emigrated to America.

Thank you Shawn for the well written, clear and easy to digest introductory article. Just after reading this first article I feel excited and ready to set sails and go!! LOL!! Cheers! Daniel.

steve Balog

well done, chap

Great intro. However, the overview diagram misidentifies the cockpit location. The cockpit is located aft of the helm. Your diagram points to a location to the fore of the helm.

William Thompson-Ambrose

An excellent introduction to the basic anatomy and function of the sailboat. Anyone who wants to start sailing should consider the above article before stepping aboard! Thank-you

James Huskisson

Thanks for you efforts mate. We’ve all got to start somewhere. Thanks for sharing. Hoping to my first yacht. 25ft Holland. Would love to cross the Bass Strait one day to Tasmania. 👌 Cheers mate

Alan Alexander Percy

thankyou ijust aquired my first sailboat at 66yrs of age its down at pelican point a beautifull place in virginia usa my sailboat is a redwing 30 if you are ever in the area i wouldnt mind your guidance and superior knowledge of how to sail but iam sure your fantastic article will help my sailboat is wings 30 ft

Thanks for quick refresher course. Having sailed in California for 20+ years I now live in Spain where I have to take a spanish exam for a sailboat license. Problem is, it’s only in spanish. So a lot to learn for an old guy like me.

Very comprehensive, thank you

Your article really brought all the pieces together for me today. I have been adventuring my first sailing voyage for 2 months from the Carolinas and am now in Eleuthera waiting on weather to make the Exumas!!! Great job and thanks

Helen Ballard

I’ve at last found something of an adventure to have in sailing, so I’m starting at the basics, I have done a little sailing but need more despite being over 60 life in the old dog etc, thanks for your information 😊

Barbara Scott

I don’t have a sailboat, neither do l plan to literally take to the waters. But for mental exercise, l have decided to take to sailing in my Bermuda sloop, learning what it takes to become a good sailor and run a tight ship, even if it’s just imaginary. Thank you for helping me on my journey to countless adventures and misadventures, just to keep it out of the doldrums! (I’m a 69 year old African American female who have rediscovered why l enjoyed reading The Adventures of Robert Louis Stevenson as well as his captivating description of sea, wind, sailboat,and sailor).

Great article and very good information source for a beginner like me. But I didn’t find out what I had hoped to, which is, what are all those noisy bits of kit on top of the mast? I know the one with the arrow is a weather vane, but the rest? Many thanks, Jay.

Louis Cohen

The main halyard is attached to the head of the mainsail, not the to the mainsheet. In the USA, we say gaff, not gaffer. The gaff often has its own halyard separate from the main halyard.

Other than that it’s a nice article with good diagrams.

A Girl Who Has an Open Sail Dream

Wow! That was a lot of great detail! Thank you, this is going to help me a lot on my project!

Hi, good info, do u know a book that explains all the systems on a candc 27,

Emma Delaney

As a hobbyist, I was hesitant to invest in expensive CAD software, but CADHOBBY IntelliCAD has proven to be a cost-effective alternative that delivers the same quality and performance.

https://www.cadhobby.com/

Leave a comment

You may also like, guide to understanding sail rig types (with pictures).

There are a lot of different sail rig types and it can be difficult to remember what's what. So I've come up with a system. Let me explain it in this article.

The Ultimate Guide to Sail Types and Rigs (with Pictures)

The Illustrated Guide To Boat Hull Types (11 Examples)

How To Live On a Boat For Free: How I'd Do It

How To Live on a Sailboat: Consider These 5 Things

Own your first boat within a year on any budget.

A sailboat doesn't have to be expensive if you know what you're doing. If you want to learn how to make your sailing dream reality within a year, leave your email and I'll send you free updates . I don't like spam - I will only send helpful content.

Ready to Own Your First Boat?

Just tell us the best email address to send your tips to:

Eurospars Masts & Rigging

Yacht mast manufacturers and yacht rigging specialists, welcome to eurospars.

Eurospars Masts and yacht Rigging is one of the countries longest established Yacht Mast manufacturers and Yacht rigging specialists.

Over 35 years experience

For over 35 years Eurospars has been producing high quality masts and rigging for yachtsmen and women for boats of all types.

Production of masts is based in Plymouth and we provide a full yacht rigging service throughout Europe. We have a fully trained rigging team who have a wealth of experience on and off the water.

Eurospars is the main U.K manufacturing agent for Sparcraft masts and Facnor furling systems. We have a large stock of genuine Sparcraft and Facnor products and parts. So if you require anything from a mast to a split pin, we can provide.

Why choose Eurospars ?

experience & Design

• Over 35 years of experience delivering high quality masts and rigging.
• The ability to take your project from design to completion.
• Staff that sail and understand customers needs and requirements.
• We pride ourselves on encouraging customer input in design where ever possible.

Yacht Mast manufacturers

• Masts that are built using the best one piece aluminum sections available.
• Mast sections available in one piece up to 22m.
• Back up from Sparcraft, one of the Worlds largest Spar manufacturers.
• high stock levels for fast delivery.

Backup from Sparcraft

Facnor Main Dealer

• 01752 550550
• 01752 565005
• [email protected]

© Copyright 2024 Eurospars. All rights reserved

Website by Jewells

Privacy Overview

• New Sailors Guide
• SAILSetc DRAWINGS
• 3D PRINT A YACHT !
• MAST, BOOM & RIGGING PARTS
• RIGGING Wire/Spectra/Dyneema
• HULL & DECK FITTINGS
• VANGS - GOOSENECKS
• BOOM SECTIONS
• MASTS Alum & Carbon Fibre
• RIG KITS & RIG PLANS
• FINS AND BULBS
• BOATS - KITS & PLANS
• RG65 - MICRO MAGIC - Parts
• SAILS & SAILMAKING
• WINCHES & DRUMS
• RADIOS SERVOs BATTERIES etc
• POND YACHTS & PARTS
• ACCESSORIES, COVERS & MISC.
• FASTENERS Screws, Bolts, Nuts
• SPARE PARTS
• CLEARANCE ITEMS
• FREE Boat & Rigging Plan Links
• PARTS DRAWINGS
• Print your own CATALOGUE
• Shipping Info
• Privacy Policy
• Conditions of Use
• Newsletter Unsubscribe
• Create Account
• Shopping Cart

Memorial Day Savings - 15% Off When You Spend $200 with code MEMORIAL15

• Call Us +1-503-285-5536
• Sign in & Register
• Recently Viewed

General Parts

General Parts, Fittings, and Accessories for Small Sailboats. We offer a full range of sailboat hardware, blocks, cleats, shackles, dollies and trailers, accessories, and more. These parts are not necessarily specific to any one model of sailboat, but rather are general fittings that often work on a variety of boats for a variety of applications. 

• Qty in Cart

Ronstan Horn Cleat 8 Inch

Ronstan Horn Cleat 6-1/2 Inch

Ronstan Horn Cleat 5 Inch

Ronstan Horn Cleat 4 Inch

Ronstan Horn Cleat 3 Inch

Fabric Guard Waterproofing Spray

Dynamic Dollies Dock Cradle

Dynamic Combo Rail System Rack Over and Spar Deck Double Tongue Dolly

Dynamic Combo Rail System Rack Over and Spar Deck Single Tongue Dolly

Dynamic Combo Rail System Rack Over Double Tongue Dolly

Dynamic Combo Rail System Rack Over Single Tongue Dolly

Dynamic Combo Rail System Double Tongue Dolly

Dynamic Combo Rail System Single Tongue Dolly

Gill Marine Tool

Gill Harness Rescue Tool

ILCA Cunningham / Outhaul Upgrade Kit Harken

• Total: items /
• Add all to cart

Adding your products to cart

Subscribe to our newsletter.

Sign up for our newsletter to receive exclusive discounts, new product announcements, and upcoming sales.

[email protected]

07446433013

Selden / Kemp Spares

Selden and Kemp parts generally carry a part no: stamped or embossed on the part.This takes the format for example 504-505.With our extensive and Historical knowledge of the Selden /Kemp range of products we have listed the most popular parts and components. However if you can not find the part you require or require more information then  please enter the information via the ASK THE EXPERTS   button below.

• Join Newsletter & Get 10% Off Your First Order

Join / Login

Model ship fittings, parts & accessories.

The largest range of wooden model ship & model boat fittings, accessories & parts available. Modelers Central is the no.1 destination for scratch model ship builders.. There are over 90 model ship fittings categories from anchors to wire, the scratch model boat builder will find what they need here. All items are listed as single items unless shown otherwise in brackets i.e. (P10) means a packet of 10.

Popular Model Ship Parts

Cleat – Wood -12x3x4.5mm

Chain – Brass – 9/64″ (3.5mm)

Chain – Gold – Solid Bead – 5/64″ (2mm)

Stanchion – Brass – Straight – 19/32″ x 2 hole (15mm)

All model ship part categories, belaying pins, bells & belfry, bitt head tops, blocks - wood, blocks - violin, cannon balls, cannon barrels, cannon kits, cannons - underdeck, cannon saddles & wheels, copper plates, deadeye heart, deadeye loops & straps, deadeye chain strap assembly, drip covers, eye pins, split pins, eye plates, gunport lids & hinges, hammocks cranes & netting, lights search & navigation, mortar barrels, oars & oarlocks, parrels & parrel beads, pulley wheels, rigging cord, rod - brass, rudder hinge, strap - brass, tackle blocks, turnbuckles, tube - copper, ventilators, ships wheels, yard spacer, filter products.

Showing 1–100 of 675 results

Deadeye – Wood – Brown – 13/64″ (5mm)

Deadeye – wood – brown – 9/32″ (7mm).

Block – Wood – Brown – 1 hole – 1/8″ (3mm)

Deadeye – Wood – Yellow – 13/64″ (5mm)

Block – wood – brown – 1 hole – 3/16inch (5mm), deadeye – wood – brown – 1/8″ (3mm).

Block – Wood – Yellow – 1 hole – 3/16inch (5mm)

Block – Wood – Brown – 2 hole – 3/16″ (5mm)

Belaying Pin – Wood – Yellow – 13/32″ (10mm)

Deadeye Loop – 13/64inch (5mm)

Block – wood – yellow – 1 hole – 1/8″ (3mm), block – wood – brown – 1 hole – 5/64″ (2mm), deadeye – wood – yellow – 1/8″ (3mm), block – wood – brown – 2 hole – 5/32″ (4mm), block – wood – brown – 1 hole -1/4″ (7mm), belaying pin – wood – yellow – 5/16″ (8mm).

Block – Wood – Yellow – 2 hole – 3/16inch (5mm)

Deadeye – wood – yellow – 9/32″ (7mm).

Cleat – Metal – Brown – 13/64″ (5mm)

Cleat – metal – brown – 9/32inch (7mm).

Gunport Frame with Lid – 33/64×33/64inch (13x13mm)

Belaying Pin – Brass – 5/16″ (8mm)

Deadeye loop – 1/8″ (3mm).

Stanchion – Wood – Brown – 5/16″ (8mm)

Port Hole – Brass – No Glass – 5/64inch (2mm)

Block – wood – brown – 2 hole – 1/4″ (7mm), gunport frame with lid – 25/64″ x 25/64″ (10mm x 10mm), block – wood – yellow – 1 hole – 5/64″ (2mm).

Deadeye – Wood – Brown – Triangular – 13/64″ (5mm)

Gunport Hinge – Dummy – Gilded – 15/32″ (12mm)

Belaying pin – wood – yellow – 1/4″ (6mm).

Belaying Pin – Wood – Brown – 5/16″ (8mm)

Deadeye – wood – brown – 5/64″ (2mm), deadeye loop – 9/32″ (7mm), belaying pin – wood – brown – 13/32″ (10mm).

Chainplate – Modern – Brass – 19/32″ (15mm)

Block – Wood – Fawn – 1 hole – 1/4″ (7mm)

Belaying pin – brass – 15/32″ (12mm).

Port Hole – Brass – With Glass – 9/32″ (7mm)

Deadeye – wood – yellow – 23/64″ (9mm).

Eye Screw – Brass – 5/64″x5/16″ (2x8mm)

Barrel – Wood – Brown – 8diax10mm

Block – wood – yellow – 2 hole – 15/32inch (4mm), belaying pin – wood – brown – 1/4″ (6mm), block – wood – fawn – 1 hole – 1/8″ (3mm), cleat – metal – brown – 15/32inch (12mm).

Deadeye Strap – 1-1/32″ x 13/64″ (26mm x 5mm)

Eye Plate – Brass – 3/32″ x 9/32″ (2.5mm x 7mm)

Port hole – brass – no glass – 13/64″ (5mm).

Stanchion – Wood – Yellow – 7/16″ (11mm)

Port hole – brass – no glass – 1/8inch (3mm), deadeye – wood – brown – 23/64″ (9mm).

Deadeye Heart – Brown – 15/64″ (6mm)

Port hole – brass – no glass – 1/16inch (1.5mm), port hole – brass – no glass – 3/64″ (1.2mm), gunport frame with lid – 9/32″ x 9/32″ (7mm x 7mm).

Block – Wood – Fawn – 2 hole – 3/16″ (5mm)

Eye screw – brass – 13/64″ x 23/64″ (5mm x 9mm), stanchion – brass – straight – 25/64″ x 2 hole (10mm), belaying pin – wood – yellow – 15/32″ (12mm), deadeye – wood – brown – triangular – 9/32″ (7mm).

Cannon Wheel – Wood – 5/32″ (4mm)

Rigging Cord – Fawn – 0.50mm x 20m – Amati

Stanchion – Brass – Straight – 19/32″ x 1 hole (15mm)

Cleat – metal – brown – 5/8inch (16mm).

Chainplate – Modern – Brass – 63/64″ (25mm) – No Loop

Belaying pin – wood – brown – 45/64″ (18mm), belaying pin – wood – brown – 9/16″ (14mm).

Gunport Frame No Lid – 25/64″ x 25/64″ (10x10mm)

Bitt Head Top – Wood – Round Head – 5mm sqr Base

Stanchion – Wood – Brown – 35/64″ (14mm)

Rigging Cord – Fawn – 0.25mm x 20m – Amati

Gunport frame no lid – 33/64″x33/64″ (13x13mm), block – wood – fawn – 2 hole – 5/32″ (4mm), deadeye strap – 1-9/64″ x 9/32″ (29mm x 7mm), block – wood – brown – 1 hole – 13/32″ (10mm).

Rigging Cord – Black – 0.5mm x 10m – Mantua

Pulley Wheel – Brass – 3/32″ (2.5mm)

Stanchion – brass – straight – 25/64″ x 1 hole (10mm).

Barrel – Wood – Yellow – 12dia x 14mm

Stanchion – wood – brown – 15/64″ (6mm).

Block – Wood – Brown – 3 hole – 3/16″ (5mm)

Rigging Cord – Black – 0.75mm x 20m – Amati

Belaying pin – wood – brown – 5/8″ (16mm), rigging cord – black – 0.25mm x 10m – mantua, cannon wheel – wood – 13/64″ (5mm).

Cannon Kit – Metal – Brown – 19/32″ (15mm)

Sheave – Wood – 3/32″ (2.5mm)

Block – Violin – Brown – 1 Hole – 9/32″ (7mm)

Eye Pins – Copper – 5/64″ x 15/32″ (2mm x 12mm) – P100

Stanchion – wood – brown – 15/32 (12mm), stanchion – brass – straight – 63/64″ x 2 hole (25mm).

Eye Pins – Brass -9/64″ x 25/32″ (3.5mm x 20mm) – P10

Cannon Barrel – Brown – Plain – 45/64″ (18mm)

Truck – Wood – 5/32″ (4mm) – With Hole

Rigging Cord – Fawn – 0.75mm x 20m – Amati

Belaying pin – wood – brown – 15/32″ (12mm), block – wood – fawn – 2 hole – 1/4″ (7mm), barrel – wood – brown – 12diax14mm.

Join 18,543 other modelers to hear about specials, new products and modeling tips

• Become a Member
• Modeling Hub
• Model Ship Building
• Maritime History
• Affiliate Program

Information

• Terms & Conditions
• Privacy Policy

Copyright © 2023 Modelers Central. ABN: 31 114 830 732

• Claim 10% Off First Order
• Get 5% off ALL orders with a Membership
• Gift Vouchers
• Help & Advice

Modelers Central. 2023, All rights reserved.

• Claim 10% Off Your First Order
• Get 5% Off All Orders With A Membership

Get 10% off

Your first order.

10% off applies only to full-price items. By providing your email address, you agree to our Terms & Privacy Policy

10% off applies only to full-price items. By providing your email address & mobile number, you agree to our Terms & Privacy Policy and consent to receive marketing messages from Modelers Central at the addresses provided. You can unsubscribe at any time by replying STOP.