• No products in cart.
  • Lithi-Tek 9500 waterproofer & densifier
  • Siloxa-Tek 8510 water, salt & oil repellent
  • Siloxa-Tek 8505 water, salt & oil repellent
  • Siloxa-Tek 8500 water & salt repellent
  • Cryli-Tek 5505 high gloss / wet look sealer
  • Cryli-Tek 5500 satin / low sheen sealer
  • Lithi-Tek 4500 densifier & hardener
  • Wear-Tek 4400 durable high gloss coating
  • Sila-Tek 3500 densifier & hardener
  • Hydro-Stain 1500 water-based concrete stain
  • Micro-Degreaser 1100 concrete cleaner & degreaser
  • Eco-Etch 1001 acid free concrete etcher
  • Hydro-Etch 1000 acid based concrete etcher
  • Countertop 880 concrete countertop sealer
  • Countertop 770 concrete countertop sealer
  • Polyaspartic 745 high gloss concrete countertop sealer
  • Countertop 660 concrete countertop sealer
  • Urethane 645 durable high gloss coating
  • Vapor-Tek 440 moisture vapor barrier coating
  • Epoxy 325 durable epoxy floor coating
  • Iso-Tek 8540 55% actives silane
  • Iso-Cure 8525 silane cure & seal
  • Iso-Tek 8501 specialty silane sealer
  • Iso-Tek 8100 100% actives silane

Product Finder

Recommendations +, by application.

  • Basement Waterproofing Sealer
  • Concrete Countertop Sealer
  • Concrete Driveway Sealer
  • Concrete Floor Sealer
  • Garage Floor Sealer
  • Patio Sealer
  • Concrete Cleaner
  • Concrete Coating
  • Concrete Cure and Seal
  • Concrete Densifier
  • Decorative Concrete Sealer
  • Oil Repellent Concrete Sealer
  • Penetrating Concrete Sealer

By Substrate

  • Brick Sealer
  • Concrete Block Sealer
  • Exposed Aggregate Sealer
  • Paver Sealer
  • Slate & Stone Sealer
  • Stamped Concrete Sealer
  • Stucco Sealer

Where To Buy

  • Concrete Sealer Supply
  • Garage Flooring, LLC
  • Redi-Mix Colors
  • DIY Home Center

Technical Documents

Photo gallery, commercial portfolio, professional applicators, lithi-tek ® 4500, concrete sealer, makes concrete 50% stronger, 100% of the time.

The most advanced concrete densifier available. It can work alone or as a primer for other products in the Ghostshield family. Either way it makes concrete up to 50% stronger and is an excellent choice before polishing concrete

ghostshield lithi tek 4500

LITHI-TEK 4500

$ 79.88

1 Gallon (Makes up to 2 Gallons): $79.88

Description

Additional information, related products.

ghostshield lithi tek 4500

SILA-TEK 3500

  • Choose an option 1 Gallon $69.88

ghostshield lithi tek 4500

LITHI-TEK 9500

  • Choose an option 1 Gallon $99.88

Penetrating concrete densifier & hardener

What it's for, warehouses, industrial facilities, used as a primer prior to application of a siloxa-tek product., what it does, strengthens and hardens concrete, increases the adhesion of subsequent concrete sealers, what it's made of, water-based lithium silicate blend, advanced density, strong as concrete, what's the finish/color, clear, flat, natural, how do you apply it, sprayer, roller or brush, what's so special about it, this cost-effective formulation densifies and makes concrete up to 50% harder, what else is like it, lithi-tek 9500 : also densifies concrete with the added benefit of water repellency sila-tek 3500 : also a concentreated densifier but of a sodium silicate base, photos and videos of ghostshield concrete sealers in action, technical specs, application instructions, testing data, lithi-tek 4500 rises above, lithi-tek 4500 meets or exceeds the following astm c-1353: abrasion resistance astm c-779: abrasion resistance astm c-642: density, absorption, and voids astm e-303: surface frictional properties ohd l-34: depth of penetration, if(typeof(wpdatacharts)=='undefined'){wpdatacharts = {};}; wpdatacharts[8] = {render_data: {"columns":[{"type":"string","label":"4500","orig_header":"lithitek9500"},{"type":"number","label":"","orig_header":"improve"}],"rows":[["a",21],["b",25],["c",31],["d",39],["4500",46]],"axes":{"major":{"type":"string","label":"4500"},"minor":{"type":"number","label":""}},"options":{"title":"depth of penetration - pecentage improvement vs. control","series":[{"color":"#ff611d","label":""}],"height":"400","responsive_width":1,"haxis":{"title":"sealer product","direction":"1"},"vaxis":{"title":"improvement","direction":"1","viewwindow":{"min":"","max":""}},"backgroundcolor":{"fill":"","strokewidth":"0","stroke":"","rx":"0"},"chartarea":{"backgroundcolor":{"fill":"","strokewidth":"","stroke":""}},"fontsize":"11","fontname":"proxima nova condensed light","crosshair":{"trigger":"","orientation":""},"orientation":"horizontal","titleposition":"out","tooltip":{"trigger":"focus"},"legend":{"position":"none","alignment":"end"}},"vaxis":[],"haxis":[],"errors":[],"series":[{"label":"","color":"","orig_header":"improve"}],"group_chart":false,"show_grid":true,"type":"google_column_chart"}, engine: "google", type: "google_column_chart", title: "depth of penetration - pecentage improvement vs. control", container: "wpdatachart_8", follow_filtering: 0, wpdatatable_id: 10, group_chart: 0}, technical specs, preparation, application.

  • Feature: Densifier & hardener
  • Chemistry: Lithium silicate
  • Color: Clear
  • Finish: Invisible
  • Category: Penetrating
  • Carrier: Water
  • Packaging: 1 Gallon
  • Coverage: Up to 800 sq. ft.
  • Reconstitution Ratio: Polishing concrete: No mixing required. Priming concrete: 1 part sealer : 1 part water (distilled water is recommended)
  • Interior/Exterior: Interior/Exterior
  • Application Method: Sprayer, Roller
  • Application Temperature: 40 F - 95 F
  • Number of Coats: 1
  • Drying Time (dry to touch): 6 Hours
  • Drying time (full cure): 24 Hours
  • Time before/after rain: 48 Hours
  • New Concrete: Yes, at least 28 days after being poured
  • Storage/Shelf Life: 1 Year
  • Clean up: Soap/water
  • Paintable: Yes
  • VOC Content: 0 g/L
  • New “green” concrete must be properly cured. Concrete should obtain 80% of design strength, typically achieved within 28 days.
  • The concrete substrate must be structurally sound and clean of oil, grease, dirt, wax, curing compounds, efflorescence, paints, previous sealers, adhesives and other contaminants that might interfere with the penetration of the sealer. Power wash, acid etch or mechanically scarify as necessary to achieve the desired surface condition. If acid was used to clean the concrete, neutralize the surface and rinse with water prior to application. Allow for proper dry time before application. The surface-zone moisture content of the concrete should not exceed 4% wt. Do not apply if standing water is visible.
  • Surface and air temperatures must be at least 40°F during application. Surface and air temperatures should not exceed 95°F. Do not apply when temperatures are expected to fall below 32°F within 8 hours or when rain is expected within 12 hours following application. Keep material from freezing. If freezing conditions exist before application, let the substrate thaw before application. Do not apply during inclement weather or when inclement weather is expected within 12 hours.
  • Crack, patching and expansion joint sealants can be applied after application; always test for compatibility and adhesion.
  • Protect people, property, vehicles, window glass, roofing materials, plastic products, shrubbery, landscaping and all surfaces not set for treatment from overspray.

Application - Primer - Concentrate

  • Always test a small area before application to ensure desired performance, aesthetics, coverage rates and to verify application technique. Let test area dry thoroughly, 5-7 days, before inspection.
  • Always mix the concentrate with 1 parts water prior to application. Distilled water is recommended for maximum performance. Stir material throughly before and during application.
  • One uniform coat is needed to ensure complete coverage. Apply with a roller, brush or low-pressure non-atomizing sprayer. Apply to saturation and roll or broom out any puddles until the sealer penetrates the substrate. Do not over apply. If applied too heavily, an unreacted white residue may develop on the surface. If it starts to rain, stop treatment and cover the treated areas.

Application - Polishing - Ready to Use

  • Always test a small area before application to ensure desired performance, aesthetics, coverage rates and to verify application technique. Let test area dry thoroughly, 5-7 days, before inspection. 2. Stir material throughly before and during application.
  • One uniform coat is needed to ensure complete coverage. Apply with a roller, brush or low-pressure non-atomizing sprayer. Apply to saturation and roll or broom out any puddles until the sealer penetrates the substrate.

Typical drying time is 4-6 hours at 70°F and 50% relative humidity. Cooler temperatures or higher relative humidity can extend the drying time. Treated surfaces will be ready for pedestrian and vehicle traffic within 24 hours.

Clean equipment and tools with hot soapy water. Unused or old material may be disposed of in a waste disposal site in accordance with local, state and federal laws.

Precautions/Safety

Avoid contact with skin, eyes and clothing, do not take internally. Use appropriate safety equipment during application and handling. Please refer to the safety data sheet (SDS) for additional precautionary instructions before use.

Best Performance

  • Proper application is the responsibility of the user.
  • Do not use on extremely porous concrete or masonry such as CMU block.
  • Do not over apply. Sealer is highly reactive. Excess material may result in a a white residue or discoloration on the surface.
  • Does not protect against equipment leaks such as oils and hydraulic fluids.
  • Make sure the most current versions of product data sheets and SDS are being used.

Lithi-Tek® 4500 is concentrated. 1 coat: 750 - 1500 square feet. Variations in texture and porosity of substrate may affect the coverage and performance of the product.

Not for use on

Bricks, concrete blocks/cinderblocks, polished concrete / extremely smooth concrete surfaces

What is the difference between the Lithi-Tek 4500 and Sila-Tek 3500?  The Lithi-Tek 4500 is of a lithium silicate chemistry, whereas the Sila-Tek 3500 is of a sodium silicate chemistry.

What do you mix the concentrate with?  The Lithi-Tek 4500 concentrate is mixed with water. 1 gallon of Lithi-Tek 4500 is mixed with 2 gallons of water.

Can I paint after sealing?  Yes, you can paint after applying the Lithi-Tek 4500.

Does the concrete need to be dry before sealing?  Yes, the concrete needs to be as dry as possible before sealing. We recommend the moisture content of the concrete be less than 4%wt. It is recommended to wait at least 24-48 hours after rain and pressure washing before sealing.

My floor turned white after sealing, what happened?  This is a common result of over application. Once the concrete reaches its point of absorption any material that was unable to penetrate reacts with the carbon dioxide in the air. This reaction leaves a white, powdery residue on the surface of the concrete. This can easily be removed by sweeping the concrete with a wire brush.

Why cant I use this product on brick or concrete blocks?  This product is not recommended for use on brick because the Lithi-Tek 4500 is a penetrating, reactive sealer. Bricks do not contain enough free lime and calcium for the sealer to react with and this causes the bricks to dry with a white, powdery residure. This product is not recommended on concrete blocks because concrete blocks are extremely porous. The best product to seal bricks and concrete blocks is the Siloxa-Tek 8500.

How many gallons do I need to treat 1000 square feet?  You will need 1 gallons to treat 1000 square feet. Each concentrated gallon of Lithi-Tek 4500 will cover up to 1000 square feet.

What can I use to apply this product?  The Lithi-Tek 4500 can be applied with a garden variety pump sprayer, 3/8" nap paint roller or a brush.

How do I mix the product with water?  The Lithi-Tek 4500 is a concentrated product that needs to be mixed with water prior to application. Pour the 1 gallon of Lithi-Tek 4500 into a 5 gallon bucket. Next add 2 gallons of water into the 5 gallon bucket. Mix the water and 4500 mixture well. You can then pour the mixture into a sprayer to spray apply, or you can dip a nap paint roller into the bucket and roll apply.

How do I clean out the sprayer after sealing?  Since the Lithi-Tek 4500 is a water based product you can use regular soap and water to clean out the sprayer and other application tools.

TECHNICAL DATA SHEET (TDS)

Click to download

SAFETY DATA SHEET (SDS)

CLICK TO DOWNLOAD

PRO-LINE BROCHURE

Ghostshield in action, recent project videos showing how to seal your concrete with ghostshield.

ghostshield lithi tek 4500

Caoba Miami WORLDCENTER

Our latest project in Florida was for the beautiful new Caoba Apartments, part of the new Miami Worldcenter. Ghostshield was the perfect sealer for their high-traffic parking garage.

ghostshield lithi tek 4500

432 Park Avenue New York

432 Park Avenue - the tallest residential building in the Western Hemisphere - sealed with our flagship commercial product, Iso-Tek 8501; a thixotropic sealer.

ghostshield lithi tek 4500

STAMPED CONCRETE CLEAN AND SEAL

View the Micro-Degreaser 1100 a non-acid-based, non-toxic cleaner and the Siloxa-Tek 8510 a deep-penetrating oil and salt repellent sealer in action.

PRO LINE AVAILABLE AT

Authorized ghostshield distributors, phone 855.573.8383, address: 66 river road hudson, nh 03051, hours: m-f 9:00am est-4:00pm est, © 2019. kretetek industries inc. all rights reserved..

  • Micro-Degrease 1100 concrete cleaner & degreaser

Recommendations

  • Salt Repellent Concrete Sealer
  • Slate Sealer
  • Stone Sealer

Ghostshield Concrete Sealers

Engineered in the Lab, Proven in the Field.™

LITHI-TEK® 4500

LITHI-TEK® 4500

Regular price $79.88

Makes concrete 50% stronger, 100% of the time

The most advanced concrete densifier available. It can work alone or as a primer for other products in the Ghostshield family. Either way it makes concrete up to 50% stronger and is an excellent choice before polishing concrete

  • Choosing a selection results in a full page refresh.
  • Press the space key then arrow keys to make a selection.

Lithi-Tek 4500 Technical Documents

ghostshield lithi tek 4500

  • Tools & Home Improvement
  • Adhesives & Sealers

Other Sellers on Amazon

Image unavailable.

Lithi-Tek 4500 - 1 Gallon Penetrating Concrete Sealer and Densifier

  • To view this video download Flash Player

ghostshield lithi tek 4500

Lithi-Tek 4500 - 1 Gallon Penetrating Concrete Sealer and Densifier

Purchase options and add-ons, about this item.

  • Increases abrasion resistance by up to 50% - Tightly binds together concrete reducing concrete dusting. Provides ease of maintenance to provide long-lasting protection on substrates subject to traffic
  • One-time permanent application eliminating the need for re-application
  • Increased performance of topcoat sealers when used as a densifying primer
  • Does not alter surface appearance - The treated surface is natural, tack-free and slip-resistant
  • Water-based - Proprietary, environmentally friendly formula with no odor, no VOC’s

Additional Details

ghostshield lithi tek 4500

Customer ratings by feature

Frequently bought together.

Lithi-Tek 4500 - 1 Gallon Penetrating Concrete Sealer and Densifier

Similar items that may ship from close to you

5-Gal. SX5000 WB DOT Approved Water Based Silane Siloxane Penetrating Concrete Sealer, Brick Sealer, Paver Sealer, Natural St

From the brand

G logo

Premium ingredients, longer service life, better protection - Ghostshield concrete sealers are used and trusted by the Pros.

Everything from superstructures to super driveways, our Amazon line of penetrating sealers, acrylic coatings, densifiers, cleaners and etchers are packaged in smaller sizes, but provide the same dependable technologies you’ve come to expect from Ghostshield.

GET CONCRETE RESULTS

Siloxa-Tek 8500

Interior & Exterior Sealers

Our sealers are easily applied on a variety of masonry surfaces including concrete, brick, stone or pavers - new or old.

ghostshield

Unmatched Water & Salt Shield

Enriched with exceptionally high levels of active ingredients, our products have a min of 40% actives, surpassing the competition.

Siloxa-Tek 8500 Ready to Use - 1 Gallon Penetrating Concrete Sealer, Water and Salt Repellent

Shop All Concrete Sealers

Visit the Store

How did we get our start?

Our mission: Ignite inspiration and drive innovation. Drawing on a solid foundation of achievements, we worked to redefine and transform the conventional perception of concrete sealer. By integrating cutting-edge technology, maximizing performance, and enhancing accessibility, we’ve not only revolutionized an industry but also established a better way to seal and succeed.

What makes us unique?

At our core lies the power of molecular nanotechnology. We’ve ingeniously crafted and reduced the size of the active ingredients by a staggering 100x compared to traditional sealers. This groundbreaking advancement enables unparalleled results, deeper penetration, extended service-life, and unrivaled performance.

Concrete sealer

The Ghostshield Advantage

Penetrating sealers fill the pores and cavities from within. Vapors beneath escape easily, but water above is deflected and repelled.

Product Description

Ghostshield logo

LITHI-TEK 4500: PENETRATING DENSIFIER & HARDENER

All-in-one primer, densifier and hardener — the first layer of concrete fortification.

lithi-tek 4500 concrete densifier

CONCRETE: 50% STRONGER

Super strength — unparalleled durability and toughness provided by freak science — where most superhero stories start. Let, it's the most advanced, lithium-based concrete densifier available, resulting in better abrasion resistance and crack prevention than sodium-based alternatives.

concrete basement

PENETRATES DEEP & REDUCES DUSTING

Easily applied with a sprayer, roller or brush, the 4500 can be used on a variety of poured concrete substrates. Can be used indoors and outdoors but a sealer is recommended to be used in conjunction if concrete will not be polished. A popular choice to prime and harden new and old concrete.

lithi-tek 4500 polished concrete

DRIES INVISIBLE

Use stand-alone as a primer for polishing or as a primer for other sealers to increase adhesion. Provides a flat, natural finish. (Concrete appears shiny in this image because it was polished after using the 4500). Dries within a few hours of application and requires only a single treatment.

At a Glance

Product Details:

  • 100% reactive- Densifies concrete surfaces into a solid mass by penetrating the concrete and chemically filing the pores from within reacting with the calcium hydroxide becoming an integral part of the concrete
  • Small molecular structure - Allows for deeper penetration and increased performance
  • Combats ASR attacks - Resists alkali-silica reaction
  • Resists efflorescence
  • 100% Breathable - Allows moisture to escape without damaging the sealer
  • Water-based - Proprietary formula with no odor, no VOC’s
  • Excellent penetration depth into any concrete substrate
  • Improves durability - Increases impact resistance
  • Super UV stable - Resistant to ultra-violent radiation, will not yellow or fad
  • Ultra Concentrate - Makes 3 or 4 gallons

Surface Preparation: New “green” concrete must be properly cured. Concrete should obtain 80% of design strength, typically achieved within 28 days. The concrete substrate must be structurally sound and clean of oil, grease, dirt, wax, curing compounds, efflorescence, paints, previous sealers, adhesives and other contaminants that might interfere with the penetration of the sealer. Power wash, acid etch or mechanically scarify as necessary to achieve the desired surface condition. If acid was used to clean the concrete, neutralize the surface and rinse with water prior to application. Allow for proper dry time before application. The surface-zone moisture content of the concrete should not exceed 4% wt. Do not apply if standing water is visible. Surface and air temperatures must be at least 40°F during application. Surface and air temperatures should not exceed 95°F. Do not apply when temperatures are expected to fall below 32°F within 8 hours or when rain is expected within 12 hours following application. Keep material from freezing. If freezing conditions exist before application, let the substrate thaw before application. Do not apply during inclement weather or when inclement weather is expected within 12 hours. Crack, patching and expansion joint sealants can be applied after application; always test for compatibility and adhesion. Protect people, property, vehicles, window glass, roofing materials, plastic products, shrubbery, landscaping and all surfaces not set for treatment from overspray.

Application - Primer: Always test a small area before application to ensure desired performance, aesthetics, coverage rates and to verify application technique. Let test area dry thoroughly, 5-7 days, before inspection. Always mix the concentrate with 3 parts water prior to application. Distilled water is recommended for maximum performance. Stir material throughly before and during application. One uniform coat is needed to ensure complete coverage. Apply with a roller, brush or low-pressure non-atomizing sprayer. Apply to saturation and roll or broom out any puddles until the sealer penetrates the substrate. Do not over apply. If applied too heavily, an unreacted white residue may develop on the surface. If it starts to rain, stop treatment and cover the treated areas.

Application (Polishing): Always test a small area before application to ensure desired performance, aesthetics, coverage rates and to verify application technique. Let test area dry thoroughly, 5-7 days, before inspection. Always mix the concentrate with 2 parts water prior to application. Distilled water is recommended for maximum performance. Stir material throughly before and during application. One uniform coat is needed to ensure complete coverage. Apply with a roller, brush or low-pressure non-atomizing sprayer. Apply to saturation and roll or broom out any puddles until the sealer penetrates the substrate.

Dry Time: Typical drying time is 4-6 hours at 70°F and 50% relative humidity. Cooler temperatures or higher relative humidity can extend the drying time. Treated surfaces will be ready for pedestrian and vehicle traffic within 24 hours.

Clean Up: Clean equipment and tools with hot soapy water. Unused or old material may be disposed of in a waste disposal site in accordance with local, state and federal laws.

Precautions/Safety: Avoid contact with skin, eyes and clothing, do not take internally. Use appropriate safety equipment during application and handling. Please refer to the safety data sheet (SDS) for additional precautionary instructions before use.

Best Performance: Proper application is the responsibility of the user. Do not use on extremely porous concrete or masonry such as CMU block. Do not over apply. Sealer is highly reactive. Excess material may result in a a white residue or discoloration on the surface. Does not protect against equipment leaks such as oils and hydraulic fluids. Make sure the most current versions of product data sheets and SDS are being used.

Coverage: Lithi-Tek 4500 is concentrated. 1 coat: 750 - 1500 square feet. Variations in texture and porosity of substrate may affect the coverage and performance of the product.

Compare with similar items

Product information, technical details, additional information, warranty & support, videos for this product.

Video Widget Card

Click to play video

Video Widget Video Title Section

What to Know About This Concrete Protection

Top Homeowner

ghostshield lithi tek 4500

Lithi-Tek 4500 & Siloxa-Tek 8510

Concrete Sealer Supply

Important information

To report an issue with this product or seller, click here .

Looking for specific info?

Customer reviews.

Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.

To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.

Reviews with images

Customer Image

  • Sort reviews by Top reviews Most recent Top reviews

Top reviews from the United States

There was a problem filtering reviews right now. please try again later..

ghostshield lithi tek 4500

  • Amazon Newsletter
  • About Amazon
  • Accessibility
  • Sustainability
  • Press Center
  • Investor Relations
  • Amazon Devices
  • Amazon Science
  • Start Selling with Amazon
  • Sell apps on Amazon
  • Supply to Amazon
  • Protect & Build Your Brand
  • Become an Affiliate
  • Become a Delivery Driver
  • Start a Package Delivery Business
  • Advertise Your Products
  • Self-Publish with Us
  • Host an Amazon Hub
  • › See More Ways to Make Money
  • Amazon Visa
  • Amazon Store Card
  • Amazon Secured Card
  • Amazon Business Card
  • Shop with Points
  • Credit Card Marketplace
  • Reload Your Balance
  • Amazon Currency Converter
  • Your Account
  • Your Orders
  • Shipping Rates & Policies
  • Amazon Prime
  • Returns & Replacements
  • Manage Your Content and Devices
  • Recalls and Product Safety Alerts
  • Conditions of Use
  • Privacy Notice
  • Your Ads Privacy Choices

Free Shipping on ALL Orders over $80.00!

Concrete and Curbing Source

Ghostshield: Lithi-Tek 4500 Concrete Sealer/Densifier

Regular price $79.88 Sale

Lithi-Tek 4500 is an advanced, high performance, industrial strength, deep penetrating concrete sealer and lithium densifier, hardener designed to strengthen concrete. This unique formula incorporates leading molecular nanotechnology. The subsequent chemical reaction elicited from the formula fills the pores and capillaries with an impenetrable crystallization. Lithi-Tek 4500 is a uniquely transparent formula containing a proprietary blend of enzymes and surfactants that aide in accelerating a deeper penetrating disbursement. Thus eliciting a more effective, uniformed chemical reaction between the formula and the concrete substrate it’s being applied to. Lithi-Tek 4500 treats and seals from the inside out; strengthening the concrete as well as providing a seal that will not chip, flake, delaminate or breakdown with UV light exposure. Natural Finish, low luster.

APPLICATIONS

Exceptional when used for:

  • Warehouses and industrial facilities
  • Use as a primer prior to application of Lithi-Tek 9500, Siloxa-Tek 8500, Siloxa-Tek 8505 or Siloxa-Tek 8510

Not for use on:

  • Bricks, concrete blocks/cinderblocks
  • Polished concrete/extremely smooth concrete surfaces
  • Increases   abrasion   resistance
  • Strengthens concrete up to 50%
  • Excellent penetration
  • No change in appearance
  • Low   VOC s
  • ASR / Alkali
  • UV   degradation
  • 1 gallon concentrate (makes 2 gallons)
  • 55 gallon Concentrate

Application Instructions

CONTACT US VIA  EMAIL  OR PHONE (888-391-2227) FOR SPECIAL PRICING ON ORDERS OF 4 OR MORE 55 GAL DRUMS!

QUESTIONS & ANSWERS

I just grinned off all Old DRYLOK in basement cinder blocks. Looking for a spray to strengthen the blocks, plus add a bit of waterproofing or wicking. Which product do you recommend. Also, my research has shown that, "Armor L3000 Concrete Densifier and Surface Hardener" is a great product for this. Why would your product be better?

I don't have any experience with Armor L3000 but it didn't doesn't appear to be recommended for cinder blocks.  4500 is also not recommended for block walls.  For water proofing,  I would recommend Siloxa-Tek 8510 which excels in your application.

Just had a new garage floor poured. Surface is smooth but not polished, concrete was hand troweled. Looking at sealing it with either 8510 only or the 4500 / 8510 combo. If I do the combo will one coat of 8510 be sufficient. What is the minimum temperature for applying both the 4500 and 8510.

The manufacturer recommends two coats for the 8510.  The 4500 is only densifying the concrete, not adding any sealing properties so you would still be better off using two coats of the 8510. Surface and air temperatures must be at least 35°F during application. Do not apply when temperatures are expected to fall below 32°F within 8 hours or when rain is expected within 12 hours following application.

I have trial finished floors in my shop. What steps should i take to ensure my best results?

You will need to power wash,  etch or grind the floor prior to application.  Power troweled concrete is too smooth to accept the densifier.

We have a customer with a 1.5 yr old 2700 sq ft brushed concrete drive and pads. In KY we have salts on roadways in winter. Which concentrate would be best and economical say for 5 yr protection?

I would say the 8505 but they are behind in production, so 8510 would be your best bet currently.

I just had new concrete poured, it is very smooth, do I need the 4500 with the 8510, or just the 8510, they also sprayed it with cure and seal, with this work over that okay, thank you.

The cure and seal will need to be removed for the sealer to penetrate.  Without removing that layer, the sealer will not do what you need to to.   If the concrete is smooth, you will need to etch or grind the concrete to open the pores.   For the 4500, this is not mandatory, but for best results, we do suggest using the 4500 to densify the concrete 7 days prior to the application of the 8510.

I have a 30+ year old driveway that is shedding surface particles (dust). The concrete is solid and not failing otherwise, and I want to seal it, so it stops shedding the dust particles. Which (if any) Ghost Shield product do you recommend to seal the dust? Thanks for your help!

I would recommend lithi-tek 9500 https://www.concreteandcurbingsource.com/collections/ghost-shield/products/ghostshield-lithi-tek-9500-concrete-sealer-densifier This will act as a densifier and the siliconates will react with the concrete to reduce the dusting you are seeing. 

How much for 1200 SQ foot shop would I need?

1200 feet would need about 1.5 gallons , so you would need to order 2 gallons total. 

Is Lithi-Tech 4500 oil or water based?

Litho-tek 4500 is a water based concentrate. 

We recently removed an indoor-outdoor carpet from our concrete back porch. The porch is 50-60 years old, and has apparently been covered by carpet since it was poured, as there is no staining. Now it sweats frequently. What product should we use to keep it from sweating and becoming slippery? It is smooth, but not polished.

I would use the 4500 densifier, followed by the 8505 penetrating sealer.

ArmorPoxy

Epoxy Floor Kits | Commercial Epoxy Flooring

² navigation.

  • Request A Quote
  • Request A Sample
  • Commercial Overview
  • Warehouse Floor Coatings
  • Industrial Floor Coating
  • Airplane Hangars
  • Factory Floors
  • Machine Shops
  • Other Industrial Floors
  • Auto Shop Flooring
  • Commercial Roofing
  • Retail Flooring
  • Trade Show Flooring
  • Education Flooring
  • Food Industry Flooring
  • Firehouse, Government Military & Transportation Flooring
  • Medical Office & Medical Facility Flooring
  • Hotel Flooring
  • Gym Flooring
  • Commercial Floor Repair Products
  • Residential Overview
  • Garage Flooring Epoxy
  • Garage Floor Tiles & Mats
  • Metallic Epoxy
  • Basement Floor Epoxy
  • Countertops
  • Bathub Refinishing
  • Pools & Pool Decks
  • Vinyl (VCT) Floor Coating
  • ArmorCarpet Interlocking Tiles
  • Low Temp Coatings
  • Exterior Overview
  • Shingle Roofs
  • RV Coatings
  • Patio & Decks
  • Patio Coatings
  • Parking Areas & Carports
  • Storage Areas
  • Anti-Graffiti Coating
  • Interior Overview
  • Garager Floring
  • Garage Floor Epoxy
  • Bathtub Refinishing
  • Epoxy for Walls
  • Garage & Basements  ArmorClad
  • 2 Layer Commercial System  ArmorPoxy II
  • 3 Layer Commercial System  ArmorUltra
  • Interlocking Floor Tiles  SupraTile
  • 5 Layer FH Heavy Tonnage / Firehouse Floor
  • Metallic Epoxy  ArmorTallic
  • Polyurea Fast Drying System  SPGX
  • Fast Drying/Low Temp Coatings  Polyaspartics
  • Polyaspartic  Spartacote  Coatings
  • Indoor / Outdoor Protective Sealer  BallistiX
  • Indoor/Outdoor Epoxy
  • Green /  LOW VOC  Epoxy
  • Urethane Cement Epoxy
  • 1 Part Epoxy Coatings
  • Vertical Epoxy
  • Densifiers & Sealers  GhostShield
  • Flash Bond Primer
  • Oil Stop Primer Kit
  • Wood & Concrete Resurfacer  ArmorRenew
  • Asphalt & Concrete Coating  Surface Bond
  • Flexible Urethane Coating  ArmorTrak
  • Balcony & Deck Coating  Liquid Rubber Membrane
  • Polyurethane Hybrid Sealer  ArmorShield
  • Outdoor Protective Sealer  BallistiX
  • Roof Coatings  ArmorRoof
  • Interlocking Tiles  ArmorCarpet
  • SupraTile Interlocking Floor Tiles
  • SupraTile Product Information
  • SupraTile Design and Urban Series
  • Crack Repair
  • Fast Set Epoxy Patch Kit
  • Concrete Patch
  • Low Temp Mortar
  • Epoxy Mortar Liquid Resin
  • Self Leveling Urethane Mortar Slurry
  • Cove Products
  • Commercial Floor Builder
  • Help Center
  • Instructions
  • How-To Videos
  • Order Samples
  • Color Charts
  • Case Studies
  • Index by Part Number
  • Garage Flooring
  • Interlocking Floor Tiles  SupraTile
  • Fast Drying/Low Temp Coatings  Polyaspartics
  • Nano Technology  Coatings
  • Indoor / Outdoor Protective Sealer  BallistiX
  • Green /  LOW VOC  Epoxy
  • Asphalt & Concrete Coating  Surface Bond
  • Epoxy  Pool Paint
  • Balcony & Deck Coating  Liquid Rubber Membrane
  • Polyurethane Hybrid Sealer  ArmorShield
  • Outdoor Protective Sealer  BallistiX
  • Interlocking Tiles  ArmorCarpet

GHOSTSHIELD LITHI-TEK 4500 1 GAL CONCENTRATE

Color has been changed to

close

Description

A HIGH PERFORMANCE PENETRATING REACTIVE CONCRETE DENSIFIER THAT STRENGTHENS AND HARDENS CONCRETE, INCREASING THE ABRASION RESISTANCE, REDUCING DUSTING.

Lithi-Tek® 4500 is a high performance, deep penetrating industrial-grade, water-based, lithium densifier for use as a stand-alone product or as a primer to strengthen and harden concrete. With its proprietary reactive agent & through the latest advances in nanotechnology, its smaller molecular structure penetrates deep into the substrate forming an insoluble crystalline structure within the pores and capillaries increasing the density and abrasion resistance while leaving the surface unchanged. Lithi-Tek® 4500 dries completely invisible, leaving the concretes appearance completely natural while forming an effective barrier within the concrete reducing concrete dusting, surface wear and micro cracks. Applies with standard garden sprayer.

If priming concrete mix 1 gallon Lithi-Tek 4500 with 1 gallon of water (2 Gal usable) – Coverage 250 sq ft/gal (500 sq ft total when mixed).

If polishing concrete Lithi-Tek 4500 is ready to use, no mixing is required – Coverage 250 sq ft/gal

Applies with standard garden sprayer.

SKU: GS-LT4500

Related products

ghostshield lithi tek 4500

GHOSTSHIELD 8510 SEALER

Ghostshield 8505 sealer.

ghostshield lithi tek 4500

  • Search Products:

About ArmorPoxy

Concrete Stains, Concrete Sealers, Concrete Color Logo

Ghostshield Lithi-Tek 4500 Concrete Hardener

$ 20.00 – $ 79.88

An industrial-grade, water-based, lithium densifier for use as a stand-alone product or as a primer to strengthen and harden concrete.

Additional Shipping Charges Apply for Orders to Alaska & Hawaii

  • More Information & Product Data
  • Product Options

Description

Product description.

Ghostshield Lithi-Tek 4500 Concrete Hardener is the most advanced concrete densifier available. This clear penetrating sealer not only densifies and hardens concrete making it up to 50% stronger, but it the go to choice to harden and prime basements and driveways. It is also an excellent choice for polishing concrete.

  • 1 Gallon Concentrate Coverage: Up to 1000 sq. ft
  • For priming concrete: 1 Gallon Concentrate mixes with 3 gallons of water to make 4 gallons
  • For polishing concrete: 1 Gallon Concentrate mixes with 2 gallons of water to make 3 gallons

Applications: Warehouses and industrial facilities, use as a primer prior to application of Lithi-Tek 9500, Siloxa-Tek 8500, Siloxa-Tek 8505 or Siloxa-Tek 8510

Not for use on: Bricks, concrete blocks/cinderblocks, polished concrete/extremely smooth concrete surfaces

  • Feature: Densifier & hardener
  • Chemistry: Lithium silicate
  • Color: Clear
  • Finish: Invisible
  • Category: Penetrating
  • Carrier: Water
  • Availability: Ultra Concentrate: Makes 3 or 4 Gallons
  • Packaging: 1 Gallon Concentrate
  • Reconstitution Ratio: 1 part sealer : 2 parts water for polishing, 1 part sealer: 3 parts water for priming
  • Interior/Exterior: Interior/Exterior
  • Application Method: Sprayer, Roller
  • Application Temperature: 45 F – 90 F
  • Number of Coats: 1
  • Drying Time (dry to touch): 6 Hours
  • Drying time (full cure): 24 Hours
  • Time before/after rain: 48 Hours
  • New Concrete: Yes, at least 28 days after being poured
  • Storage/Shelf Life: 1 Year
  • Clean up: Soap/water
  • Paintable: Yes
  • VOC Content: 0 g/L

For complete Lithi-Tek 4500 application, SDS Sheets, FAQ’s, testing and technical data visit www.ghostshield.com

Additional information

  • Share On Facebook
  • Tweet This Product
  • Pin This Product
  • Email This Product

Related products

ghostshield lithi tek 4500

Hydro-Stain Forrest Green Concrete Stain

ghostshield lithi tek 4500

Ghostshield Siloxa-Tek 8510 Concrete Sealer

ghostshield lithi tek 4500

Ghostshield WEAR-TEK® 4400 Concrete Sealer (5 Gallons)

Financial Reporting and Analysis Software

  • Our products:
  • Financial Analysis
  • Reporting Tool
  • US Industry Benchmarking
  • Russian Entites Profiles

Russian Company OOO "BETA GIDA"

Brief profile.

active Commercial

Facts to Consider

Negative net assets.

A significant amount of the taxes paid (37.6 mln. RUB.).

The organization holds 1 license.

show 2 more positive facts

Complete Profile

  • 1. General Information
  • 2. Registration in the Russian Federation
  • 3. Company's Activities
  • 4. Legal Address
  • 5. Owners, Founders of the Entity
  • 6. OOO "BETA GIDA" CEO
  • 7. Entities Founded by Company
  • 8. Number of Employees
  • 9. Company Finance
  • 10. Entities related to OOO "BETA GIDA"
  • 11. Timeline of key events
  • 12. Latest Changes in the Unified State Register of Legal Entities (USRLE)

General Information

Full name of the organization: OBSHCHESTVO S OGRANICHENNOI OTVETSTVENNOSTIU "BETA GIDA"

TIN: 5053023219

KPP: 505301001

PSRN: 1025007115870

Location: 144004, Moscow Oblast, Elektrostal, proezd Energetikov, 1A

Line of business: Processing of tea and coffee (OKVED code 10.83)

Organization status: Commercial, active

Form of incorporation: Limited liability companies (code 12300 according to OKOPF)

Registration in the Russian Federation

The tax authority where the legal entity is registered: Mezhraionnaia inspektsiia Federalnoi nalogovoi sluzhby №6 po Moskovskoi oblasti (inspection code – 5031). The tax authority before 08/23/2021 – Inspektsiia Federalnoi nalogovoi sluzhby po g.Elektrostali Moskovskoi oblasti (code 5053).

Registration with the Pension Fund: registration number 060055020449 dated 1 February 2013.

Registration with the Social Insurance Fund: registration number 501900224550191 dated 19 June 2001.

Company's Activities

The main activity of the organization is Processing of tea and coffee (OKVED code 10.83).

Additionally, the organization listed the following activities:

OOO "BETA GIDA" holds license entitling to carry out the following activities:

The organization is included in the Roskomnadzor registry as a personal data processing operator .

Legal Address

OOO "BETA GIDA" is registered at 144004, Moscow Oblast, Elektrostal, proezd Energetikov, 1A. ( show on a map )

Also at this address is branch of OOO "CHAMPION FUD" (FILIAL "CHAMPION FUD ELEKTROSTAL").

Owners, Founders of the Entity

The founders of OOO "BETA GIDA" are

OOO "BETA GIDA" CEO

The head of the organization (a person who has the right to act on behalf of a legal entity without a power of attorney) since 9 November 2016 is general manager Avdzhy Ozench (TIN: 505312904050).

Entities Founded by Company

OOO "BETA GIDA" is not listed as a founder in any Russian legal entities.

Number of Employees

In 2022, the average number of employees of OOO "BETA GIDA" was 120 people. This is 35 people more than in 2021.

Company Finance

The Authorized capital of OOO "BETA GIDA" is 123 thousand RUB. This is significantly higher than the minimum authorized capital established by law for LTD (10 thousand RUB).

In 2022, the organization received the revenue of 1.1 billion RUB, which is 385 million RUB, or by 57.8 %, more than a year ago.

As of December 31, 2022, the organization's total assets were 1.2 billion RUB This is 93.5 million RUB (by 8.6 %) more than a year earlier.

The OOO "BETA GIDA"’s operation in 2022 resulted in the profit of 67.7 million RUB. This is by 95.2 times more than in 2021.

The organization is not subject to special taxation regimes (operates under a common regime).

The organization is listed in the small businesses registry. In accordance with the legislation of the Russian Federation, organizations with the annual revenue of up to 800 mln RUB and up to 100 employees fall into the small business category.

Information about the taxes and fees paid by the organization for 2022

The organization had no tax arrears as of 10/01/2023.

Entities related to OOO "BETA GIDA"

Based on the data from the Unified State Register of Legal Entities, the following legal entities and people are directly or indirectly related to the organization.

Timeline of key events

  • Information about the founder was entered – Ugur Beshir .
  • Information about the founder was entered – Ugur Dzhelal .
  • Information about the founder was entered – Ugur Ekrem .

Latest Changes in the Unified State Register of Legal Entities (USRLE)

  • 11/16/2022 . Submission of information about the registration of an individual at the place of residence.
  • 08/23/2021 . Entering information about accounting with the tax authority.
  • 03/11/2021 . State registration of changes made to the constituent documents of a legal entity related to changes in information about a legal entity contained in the Unified State Register of Legal Entities, based on an application.
  • 06/04/2019 . Submission of information on the issuance or replacement of documents proving the identity of a citizen of the Russian Federation on the territory of the Russian Federation.
  • 04/07/2018 . Submission of information on the issuance or replacement of documents proving the identity of a citizen of the Russian Federation on the territory of the Russian Federation.
  • 11/10/2016 . Entering information about registration in the Pension Fund of the Russian Federation.
  • 11/09/2016 . Change of information about a legal entity contained in the Unified State Register of Legal Entities.
  • 05/17/2016 . Change of information about a legal entity contained in the Unified State Register of Legal Entities.
  • 12/10/2015 . State registration of changes made to the constituent documents of a legal entity related to changes in information about a legal entity contained in the Unified State Register of Legal Entities, based on an application.
  • 06/26/2015 . Representation by the licensing authority of information about the grant of a license.

* The date of change in the Unified State Register of Legal Entities is shown (may be different from the actual date).

The data presented on this page have been obtained from official sources: the Unified State Register of Legal Entities (USRLE), the State Information Resource for Financial Statements, the website of the Federal Tax Service (FTS), the Ministry of Finance and the Federal State Statistics Service.

Start free Ready Ratios financial analysis now!

No registration required! But once registered , additional features are available.

  • Terms of Use
  • Privacy Policy

Login to Ready Ratios

If you have a Facebook or Twitter account, you can use it to log in to ReadyRatios:

Have you forgotten your password?

Are you a new user ?

Fontesk

Moscow Metro Font

moscow_metro-6

Moscow Metro is a multi-line display typeface inspired by the Moscow underground map. It comes in Regular and Color versions.

Moscow Metro is ideal for posters and headlines, neon signage and other artworks.

  • Share by email

Designed by: Nadira Filatova Website

License: free for commercial use.

salikinscript

World Energy

Rosatom Starts Production of Rare-Earth Magnets for Wind Power Generation

TVEL Fuel Company of Rosatom has started gradual localization of rare-earth magnets manufacturing for wind power plants generators. The first sets of magnets have been manufactured and shipped to the customer.

ghostshield lithi tek 4500

In total, the contract between Elemash Magnit LLC (an enterprise of TVEL Fuel Company of Rosatom in Elektrostal, Moscow region) and Red Wind B.V. (a joint venture of NovaWind JSC and the Dutch company Lagerwey) foresees manufacturing and supply over 200 sets of magnets. One set is designed to produce one power generator.

“The project includes gradual localization of magnets manufacturing in Russia, decreasing dependence on imports. We consider production of magnets as a promising sector for TVEL’s metallurgical business development. In this regard, our company does have the relevant research and technological expertise for creation of Russia’s first large-scale full cycle production of permanent rare-earth magnets,” commented Natalia Nikipelova, President of TVEL JSC.

“NovaWind, as the nuclear industry integrator for wind power projects, not only made-up an efficient supply chain, but also contributed to the development of inter-divisional cooperation and new expertise of Rosatom enterprises. TVEL has mastered a unique technology for the production of magnets for wind turbine generators. These technologies will be undoubtedly in demand in other areas as well,” noted Alexander Korchagin, Director General of NovaWind JSC.

For reference:

TVEL Fuel Company of Rosatom incorporates enterprises for the fabrication of nuclear fuel, conversion and enrichment of uranium, production of gas centrifuges, as well as research and design organizations. It is the only supplier of nuclear fuel for Russian nuclear power plants. TVEL Fuel Company of Rosatom provides nuclear fuel for 73 power reactors in 13 countries worldwide, research reactors in eight countries, as well as transport reactors of the Russian nuclear fleet. Every sixth power reactor in the world operates on fuel manufactured by TVEL. www.tvel.ru

NovaWind JSC is a division of Rosatom; its primary objective is to consolidate the State Corporation's efforts in advanced segments and technological platforms of the electric power sector. The company was founded in 2017. NovaWind consolidates all of the Rosatom’s wind energy assets – from design and construction to power engineering and operation of wind farms.

Overall, by 2023, enterprises operating under the management of NovaWind JSC, will install 1 GW of wind farms. http://novawind.ru

Elemash Magnit LLC is a subsidiary of Kovrov Mechanical Plant (an enterprise of the TVEL Fuel Company of Rosatom) and its main supplier of magnets for production of gas centrifuges. The company also produces magnets for other industries, in particular, for the automotive

industry. The production facilities of Elemash Magnit LLC are located in the city of Elektrostal, Moscow Region, at the site of Elemash Machine-Building Plant (a nuclear fuel fabrication facility of TVEL Fuel Company).

Rosatom is a global actor on the world’s nuclear technology market. Its leading edge stems from a number of competitive strengths, one of which is assets and competences at hand in all nuclear segments. Rosatom incorporates companies from all stages of the technological chain, such as uranium mining and enrichment, nuclear fuel fabrication, equipment manufacture and engineering, operation of nuclear power plants, and management of spent nuclear fuel and nuclear waste. Nowadays, Rosatom brings together about 350 enterprises and organizations with the workforce above 250 K. https://rosatom.ru/en/

ghostshield lithi tek 4500

MingYang Signs MoU for UK Manufacturing

ghostshield lithi tek 4500

Adani Group to Develop 1,000 MW Wind Power Project in Sri Lanka's Mannar

ghostshield lithi tek 4500

U.S. Added Less New Wind Power in 2021 Than the Previous Year — Here’s Why

ghostshield lithi tek 4500

France Awards Only 54 MW of Capacity in a 925 MW Onshore Wind Tender

ghostshield lithi tek 4500

Vestas Sells Wind Project in Mississippi to AES Corporation

ghostshield lithi tek 4500

Vestas V236-15.0 MW Wind Turbines Ready for Testing?

IMAGES

  1. Lithi-Tek 4500 Concrete Sealer // Ghostshield®

    ghostshield lithi tek 4500

  2. Ghostshield Lithi-Tek 4500 Concrete Sealer and Densifier

    ghostshield lithi tek 4500

  3. Ghostshield Lithi-Tek 4500: An industrial-grade, water-based, lithium

    ghostshield lithi tek 4500

  4. GHOSTSHIELD Lithi-Tek 4500 Deep Penetrating Concrete SealerDensifier

    ghostshield lithi tek 4500

  5. Ghostshield Lithi-Tek 4500 Lithium Based Concrete Densifier Transparent

    ghostshield lithi tek 4500

  6. Ghostshield Lithi-Tek 4500 Lithium Based Concrete Densifier Transparent

    ghostshield lithi tek 4500

VIDEO

  1. Saint Martin😍#saintmartin

  2. 30 November 2023

  3. Avec 4500€, obtiens un terrain de 500M2

  4. Professional OEM/ODM Escalator Manufacturer Commercial Vvvf Indoor Escalator, Escalator, Indoor Esca

  5. lithi talli Heart full smile

  6. GHOST OF THE UCHIHA

COMMENTS

  1. Lithi-Tek 4500 Concrete Sealer > Ghostshield®

    (130 reviews) PRODUCT DATA Concrete: 50% Stronger Super strength — unparalleled durability and toughness provided by freak science — where most superhero stories start. Let, it's the most advanced, lithium-based concrete densifier available, resulting in better abrasion resistance and crack prevention than sodium-based alternatives.

  2. LITHI-TEK 4500

    LITHI-TEK 4500 - Ghostshield Concrete Sealers LITHI-TEK ® 4500 Concrete Sealer Makes concrete 50% stronger, 100% of the time The most advanced concrete densifier available. It can work alone or as a primer for other products in the Ghostshield family.

  3. Ghostshield 1 gal. Invisible Penetrating Concrete Sealer Plus Densifier

    Invisible Penetrating Concrete Sealer Plus Densifier and Hardener 4500 - The Home Depot Home / Paint / Concrete Coatings / Concrete Sealers Ghostshield 1 gal. Invisible Penetrating Concrete Sealer Plus Densifier and Hardener (138) Questions & Answers (49) +2 Hover Image to Zoom $ 79 88 /gallon

  4. LITHI-TEK® 4500

    Tweet Makes concrete 50% stronger, 100% of the time The most advanced concrete densifier available. It can work alone or as a primer for other products in the Ghostshield family. Either way it makes concrete up to 50% stronger and is an excellent choice before polishing concrete You may also like

  5. Lithi-Tek 9500 Concrete Sealer > Ghostshield®

    Lithi-Tek 9500 Concrete Sealer > Ghostshield® Penetrating Waterproofer & Densifier Lithi-Tek® 9500 Our best-selling hybrid penetrating sealer also densifies—for unmatched protection and value. By Volume Loading buy options... By Area Square Feet * Coverage may vary due to porosity and texture of substrate. (737 reviews) PRODUCT DATA

  6. Technical Documents > Ghostshield®

    Lithi-Tek 4500 Technical Documents Technical Data Sheet (TDS) PDF, 343k Application Instructions PDF, 96k Safety Data Sheet (SDS) PDF, 303k Ghostshield Pro Line Brochure PDF, 8.1mb All Product Technical Documents

  7. Lithi-Tek 4500

    Visit the Ghostshield Store 4.5 91 ratings $7988 ($0.62 / Fl Oz) About this item Increases abrasion resistance by up to 50% - Tightly binds together concrete reducing concrete dusting.

  8. PDF APPLICATION INSTRUCTIONS LITHI-TEK® 4500

    (Lithi-Tek® 4500 can be mixed in smaller quantities as long as the one (1) part Lithi-Tek® 4500 to three (3) parts water ratio is followed. For example, one (1) cup Lithi-Tek® 4500 can ... 1000 N West St Wilmington, DE 19801 | 855-573-8383 | www.ghostshield.com Step 5: Spray or roll one coat onto the application area. Apply until the surface ...

  9. Ghostshield Lithi-Tek 4500 Lithium Based Concrete Densifier Transparent

    Ghostshield Lithi-Tek 4500 Lithium Based Concrete Densifier Transparent Concrete Sealer Concentrate (1-Gallon) Item # 2735293 | Model # 4500 Shop Ghostshield 125 Hardens and strengthens concrete up to 50% Reduces moisture vapor transmission One coat performance/deeper penetration Easy & Free Returns

  10. Ghostshield: Lithi-Tek 4500 Concrete Sealer/Densifier

    Lithi-Tek 4500 is an advanced, high performance, industrial strength, deep penetrating concrete sealer and lithium densifier, hardener designed to strengthen concrete. This unique formula incorporates leading molecular nanotechnology. The subsequent chemical reaction elicited from the formula fills the pores and capill

  11. PDF 4500 TDS v

    Description Lithi-Tek® 4500 is a high performance, deep penetrating industrial-grade, water-based, lithium densifier for use as a stand-alone product or as a primer to strengthen and harden concrete.

  12. KreteTek Ghostshield Lithi-Tek 4500 Concrete Sealer and Densifier

    KreteTek Ghostshield Lithi-Tek 4500 Concrete Sealer and Densifier SKU: KRTLITHI45 Quick ID: Q64 $79.88 In Stock Usually Leaves Warehouse Same/Next Business Day Shipping Always Ships Free Add to Cart Features For use in warehouses and industrial facilities on interior and exterior, new and old concrete surfaces

  13. Ghostshield Concrete Sealers

    Lithi-Tek® 4500 concrete primer and hardener stops dusting and increases abrasion resistance. Siloxa-Tek® 8510 natural finish, penetrating concrete sealer pr...

  14. GhostShield Lithi Tek 4500 1 Gallon -ArmorPoxy Coatings

    The Lithi-Tek 4500 is a water-based lithium densifier which strengthens concrete, increasing its abrasion resistance. This product can be used on its own, or as a primer for other Ghostshield products. Applies with a garden sprayer. Covers 1,000 square feet. GHOSTSHIELD LITHI-TEK 4500 1 GAL CONCENTRATE $79.88 $110.00 Quantity $ 79.88 Add to cart

  15. Sealing Cement Pool Deck with Ghostshield 4500

    I applied the Ghostshield Lithi-Tek 4500 densifier sealer product as a primer first step. The 4500 product takes 5-7 days to fully cure so in a week from now...

  16. Ghostshield Lithi-Tek 4500 Concrete Hardener

    Product Description. Ghostshield Lithi-Tek 4500 Concrete Hardener is the most advanced concrete densifier available. This clear penetrating sealer not only densifies and hardens concrete making it up to 50% stronger, but it the go to choice to harden and prime basements and driveways. It is also an excellent choice for polishing concrete.

  17. Ghostshield Lithi-Tek 4500 Lithium Based Concrete Densifier Transparent

    Item # 758494 | Model # 4500 118 Hardens and strengthens concrete up to 50% Reduces moisture vapor transmission One coat performance/deeper penetration Easy & Free Returns Return your new, unused item in-store or ship it back to us free of charge. Learn More This item is no longer sold on Lowes.com Overview

  18. Machine-Building Plant (Elemash)

    In 1954, Elemash began to produce fuel assemblies, including for the first nuclear power plant in the world, located in Obninsk. In 1959, the facility produced the fuel for the Soviet Union's first icebreaker. Its fuel assembly production became serial in 1965 and automated in 1982. 1. Today, Elemash is one of the largest TVEL nuclear fuel ...

  19. Technical Documents > Ghostshield®

    Lithi-Tek 4500 4 Documents Iso-Tek 8555 6 Documents Iso-Tek 8540 6 Documents Iso-Tek 8515 6 Documents Iso-Tek 8511 6 Documents Iso-Tek 8501 7 Documents Iso-Tek 8100 6 Documents Iso-Cure 8525 3 Documents Iso-Cure 309 3 Documents Hydro-Stain 1500 4 Documents Hydro-Etch 1000 4 Documents Epoxy Max 100 7 Documents Epoxy 325 6 Documents

  20. Russian Company OOO "BETA GIDA"

    The net assets of OOO "BETA GIDA" as of 12/31/2022 were negative, minus 578 million RUB. The OOO "BETA GIDA"'s operation in 2022 resulted in the profit of 67.7 million RUB. This is by 95.2 times more than in 2021. The organization is not subject to special taxation regimes (operates under a common regime).

  21. Moscow Metro Font › Fontesk

    July 14, 2020 featured in Display. Bold Color Cool Creative Cyrillic Geometric Neon Outlined Retro. Download Moscow Metro font, a multi-line display typeface in two styles, inspired by the Moscow underground map. Moscow Metro is ideal for posters and headlines, neon signage and other artworks.

  22. Rosatom Starts Production of Rare-Earth Magnets for Wind Power

    06 Nov 2020 by Rosatom. TVEL Fuel Company of Rosatom has started gradual localization of rare-earth magnets manufacturing for wind power plants generators. The first sets of magnets have been manufactured and shipped to the customer. In total, the contract between Elemash Magnit LLC (an enterprise of TVEL Fuel Company of Rosatom in Elektrostal ...