- to User preferences
- Français
+316-19730566 / +3150-2111780
- Sold yachts
Essex Smack 28 ft
headingdetails Essex Smack 28 ft
- Sleeping places 3
- year built 1995
- Berth Lauwersoog
- Category Sailing yacht
- Dimensions 8,70 x 2,60 x 1,20 m.
- Engine Yanmar 18 HP (13 kW) Diesel
- Construction material GRP
- Reference number 201004
Accommodation
Navigation and electronics, deck equipment.
The Essex Smack 28 ft is derived from an English 'East Coast Fishing Smack' built in polyester by Tyrell & Young Boatbuilders. She is very heavy built (at least 5,000 kg.) And suitable for sea voyages.
This Essex Smack 28 ft was refitted in 2006: the entire interior has been renewed, the superstructure has been newly built in oak, the boxes and engine hatch have been installed in the cockpit. She is in a very good condition.
The length including yankee boom is 12.80 m.
all Photos view 72
Other yachts
year built • Berth
Higher contrast Reduced data traffic Omit animations
Downs Road Boatyard 19A Downs Road Maldon, Essex, CM9 5HG Telephone: 01621 859373 Mobile: 07885 859373 Email: [email protected]
Mj lewis & son (boat sales) ltd..
Downs Road Boatyard 19A Downs Road Maldon, Essex CM9 5HG Telephone: 01621 859373 Mobile: 07885 859373 Email: [email protected]
Welcome to MJ Lewis Boat Sales
26.5m thames sailing barge, steel1926.
Lying afloat: Pin Mill, nr. Ipswich Asking Price: £395,000 GBP ...
80ft Thames Sailing Barge, wooden, totally restored, 1881.
Afloat: Maldon, Essex, CM9 Guide Price: £325,000 GBP ...
25m Thames Sailing Barge, wooden, 1895
Lying afloat: River Crouch, Essex OFFERS considered. IRO £125000 ...
40m Belgian Spitz motor barge, 1956
Lying: Maldon, Essex, REDUCED Asking Price: £55,000 ...
40ft Narrow Boat, a Semi Traditional Stern Cruiser, 1936
Afloat: Harlow, Essex Asking Price: £39,000 GBP ...
42ft Thames Sailing Barge, Wooden half size, 1881, A Project.
Lying: St Osyth, nr. Clacton Price: £35,000 GBP ...
26ft Classic Gaff Cutter 1906 Gann & Palmer
Lying afloat: Under Cover, Maylandsea, nr Maldon Price: £26,000 GBP ...
6.60m Guy Couach 660E Pleasure/Fishing Boat 1986
Afloat: Levington Marina, Suffolk Asking Price: £24,500 GBP ...
7m Vinga Marine, GRP motor sailer, 1974
Lying afloat: Maldon, Essex CM9 Asking Price: £22,950 GBP ...
24ft Tamerisk, GRP Gaff Cutter, a Restored project,2023
Stood Ashore: Faversham, Kent, ME13 7BY Price: £19,950 GBP ...
Tidemaster 21, GRP Open Launch
Ashore: West Mersea, Essex Asking Price: £17,500 GBP ...
10m Buchanan Sloop 1962, Restoration Project.
Ashore: St Oysths, nr Colchester Reduced Asking Price: £17,000GBP ...
30ft Classic Bermudan Cutter 1937
Ashore: Nr. Great Yarmouth Asking Price: £16,950 GBP ...
28ft Gaff Cutter, wooden 1895 ex Lugger
Lying: Afloat Hollowshore , Kent Asking price: £15,000 ...
25ft Teak Bermudan Sloop with Aux, Dalimore, 1950
Afloat Maldon Essex Cm9 REDUCED Asking Price: £13,950 GBP ...
Contessa 26, Mk1 version, 1972
Ashore: Walton on the Naze, Essex. CO14 Asking Price: £12,950 GBP ...
18ft Gaff Canoe Yawl, Sea Otter by David Moss, new inboard & Road Trailer
Ashore: Mistley, Essex CO11 1NG Asking Price: £12,950 GBP (Boat & Trailer) ...
36ft Classic Teak Bermudan Cutter, Built by Fays, Soper design 1901
Ashore: nr.Frinton CO13 Asking Price: £10,950 GBP ...
28ft, Colvic Countess 28, GRP Bermudan Sloop, 1982
Lying: Maylandsea, Essex. CM3 Price: £10,950 GBP ...
Oystercatcher 16, GRP Gaff cutter with Aux, 1997
Ashore: Maldon, Essex CM9 Asking Price: £9,950 GBP ...
10.5m Teak Bermudan Sloop, Francis Jones, 1960
Afloat :, Maylandsea, Essex CM3 Offer Price: £9,500 ...
26ft Classic Canoe Yacht, J Pain Clark design, 1902.
Lying: Pin Mill, Suffolk Asking Price: £7,750 GBP ...
16ft Classic wooden Sailing Dinghy, 1890’s
Lying: West Mersea, Essex Asking Price: £6,750 GBP ...
16ft Salcombe Yawl, Day Sailer ,1982
Lying Ashore : Kirby Le Soken, Walton Backwaters, C013 Asking Price: £6500 GBP Complete ...
20ft Gaff Rigged Open Boat, Road trailer & Outboard.
Ashore: Coddenham, Nr Ipswich, Suffolk. IP6 Price: £6,000 GBP ...
23ft Motor Fishing Boat, Parson’s of Leigh,1960
Afloat: Oare Creek, Nr Faversham REDUCED Asking Price: £5,900 GBP ...
26ft Mystere Flyer, GRP fin keel sloop, 1983.
Ashore: Maylandsea, Essex, CM3 REDUCED to: £4,950 GBP ...
25ft Beneteau First 25,1981
Lying afloat: Heybridge Basin, nr. Maldon, Essex. CM9 Asking Price: £4,950 GBP ...
15ft 6ins Gaffers & Luggers, Picarooner GRP,1992
Lying: Penryn, Cornwall, TR10 8AD Asking Price: £3,950 GBP ...
15ft Selway Fisher design, a pocket sail cruiser, new build 2021.
Ashore: Worcester Price on Application ...
- Essex Smack
- Essex Smack 29
Essex Smack 29 (1993) for sale in Milford Haven, United Kingdom
£23,000 GBP Tax Paid / Included Get a foreign exchange quote
- Transport It
- Currency Exchange
About this Essex Smack 29
We are delighted to present this beautiful Essex Smack. Built in 1993 with GRP hull on to Iroko decks with bulwarks, capping rail and rubbing strake she has all the beauty of an old classic with sweeping lines, tapered stern and sheer bow.
The rig is gaff-cutter set with an extensive sails wardrobe, sails are original but show in a good state of repair. The mast and all standing rigging has been inspected on a regular basis and all necessary maintenance attended to. The decks are well maintained, sealed and solid.
Propulsion comes from a simple Yanmar GM10 unit, sufficient for berthing/mooring duties. The engine is in good working order.
A traditional yacht in every sense, this boat really does stand out from the rest. Beautiful to look at, equally pleasurable to sail.
Please feel free to email or call for further information.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.
Register with Boatshed to see 63 extra photos of this Essex Smack 29 .
This Essex Smack 29 has been personally photographed and viewed by James Kimpton of Boatshed Wales.
Boatshed Wales
Your message has been sent.
Contact Broker/Dealer
By submitting this form, you agree to our Privacy & Cookie Policy
Site protected by Google reCAPTCHA Privacy Policy and Terms of Service apply
Essex Smack 29 also found under:
- Antique/classic
- Essex Smack United Kingdom
- Essex Smack 29 United Kingdom
Featured articles:
What If You Can’t Sell Your Boat?
If you have a boat you no longer want, you ca...
How to Shop at a Boat Show
Every year, millions of people head to boat s...
Should You Invest in Repairing Your Boat Before Selling It?
If you're getting ready to sell a boat, y...
More boats from this seller
View details
£25,726 GBP
Listed price €30,000 EUR
£158,645 GBP
Listed price €185,000 EUR
£38,589 GBP
Listed price €45,000 EUR
View all 633 boats
Ask for more photos
Email to a friend.
By submitting this form, you agree to our Privacy & Cookie PolicySite protected by Google reCAPTCHA Privacy Policy and Terms of Service apply
Report this boat
Thank you, your message has been sent.
Why not register your interest in these similar boats?
We will send the following details to the sellers of the selected boats: Your name, email address, phone number (if provided). your country and which boat(s) you are interested in.
Request More Information
Sign up to our newsletter, change units of measure.
This feature requires cookies to be enabled on your browser.
Show price in:
Show lengths, beam and draft in:
Show displacement or weight in:
Show capacity or volume in:
Show speed in:
Show distance in:
Primrose CK273 is a 36ft Aldous smack built in 1892.
PRIMROSE is an Essex smack, a fishing vessel of timber carvel construction, iroko on sawn oak frames. She was built in 1892 by Aldous of Brightlingsea and is powered by sail alone. The vessel was built for fishing and oyster dredging from West Mersea and then Maldon. She was saved in the 1970s from the Roach and rebuilt by Testers of Faversham between 1998 and 2000. She is now used as a private leisure craft and has just circumnavigated the UK in 2020.
Colne Match results;
- 2001 1st COCK OF THE COLNE
- 2001 Skippers Trophy
- 2005 2nd Arthur Bowles Cup
- 2005 1st smack over the start line Hammond Bell Trophy
- 2007 3rd Xanthe Trophy
- 2009 1st smack over the start line Hammond Bell Trophy
- 2009 3rd Xanthe Trophy
- 2010 3rd Xanthe Trophy
- 2011 1st COCK OF THE COLNE
- 2011 Skippers Trophy
- 2011 Best recorded elapsed time Bob Harman Trophy
Alternatively,
- Register with Facebook
- Register with Google
Why Boatshed?
View all of your boats statistics in real time
Create a virtual "watch" on boats you're interested in
Refer a boat and earn up to 20% of the brokers commission
Language & Currency
Search our catalog, go direct, enter a boat reference, essex smack boats for sale search by keyword, my selections, refine search.
- Sail Boats 1
- United Kingdom 1
- 7 - 9 Meters 1
- £20,000 - £30,000 1
- Long Keel 1
- > 30 years 1
- Boatshed Wales 1
- Sold / Unavailable Boats
- Boats with 360° Photos
- Boats with Videos
Boatshed Archive
View our full archive of over 20,000 previously listed boats.
Your filtered results: Reset
Essex smack 29.
Results 1 - 1 of 1
Create Alert
Please enter a name for your alert
Alternatively,
- Register with Facebook
- Register with Google
Why Boatshed?
View all of your boats statistics in real time
Create a virtual "watch" on boats you're interested in
Refer a boat and earn up to 20% of the brokers commission
Language & Currency
Search our catalog, go direct, enter a boat reference, classic oyster smack 45ft, essex smack rebuilt in 2004, £ 0 sold / unavailable.
- Boat REF# · 201266
- Length · 13.72m
- Year · 1885
- Construction · Wood
- Underwater profile · Long Keel
- Sleeping berths · 6
- Engine · 1 x diesel 25hp, Beta 3 Cylinder (2011)
- Lying · Essex, UK (By Appointment Only)
Boatshed Essex
This boat is off the market but here are some boats that are still for sale.
- Specification
- Additional Information
Extra Details
Engine hour figure is low and certainly less than 150 hours.
Gaff rigged Wood spars (2004) with Galvanised standing rigging (2004)
Douglas Fir hollow sectioned mast.
The sail wardrobe comprises of Mainsail, Topsail, 4 Jibs and 4 Staysails - plus various downwind sails.
The Topsail rig was added in 2012.
Electrical Systems
12 volt battery, 1 batteries charged by: engine
Construction
Built in 1885 by Aldous of Brightlingsea this Essex Oyster Smack was completely rebuilt in 2004 by Dan Tester.
The hull is constructed of Oak frames with Iroko planking. The decks are two layers of 18mm Marine Ply on Oak beams. The decks are epoxy sheathed and painted.
LOA with Bowsprit Extended 65ft.
Accommodation
Electric pump for cold water supply to sink. Commode heads.
2 burner propane Stove
Manual Wooden Barrel Hand Spike Windlass windlass 3 anchors (2 x Fishermans and a Kedge.) 30.00m of chain Zodiac dinghy (2004) (Inflatable) 30hp outboard, Mariner 2-Stroke (2004) Deck Hatch Covers.
Nav Equipment
Navman 8084 Chart Plotter. Handheld VHF. Clipper Duet Speed/Log & Depth Port and Starboard Deck Level Navigation Lights. Steaming Light. Anchor Light can also be raised.
Safety Equipment
1 bilge pumps (1 manual / 0 electric)
Broker's Comments
This Essex Oyster Smack was fully rebuilt in 2004 by Dan Tester a respected shipwright who has refurbished and rebuilt a number of Essex Smacks in recent years. Commissioned in 2005 she was in reality a new boat; a 100% rebuild. Her owners from new have maintianed her in excellent condition; an engine was added in 2011 this has completed less than 150 hours running time and then in 2012 she was re-rigged with a topmast. All the work completed on this gorgeous boat has been completed with the utmost thought and care; she has an excellent racing record regularly completing within the lively competitive smack racing scene here on the east coast. The interior is comfortably fitted with a galley and good sized saloon area she will sleep up to 6 people.
Please note this comments section is public . Please do not post your personal details here. Please read our commenting guidelines before posting.
Get Access to More
View unlimited photos of every boat
Walkthrough videos
VR 720° experiences
Get notified of new boats of your interest
Personalised boat recommendations
Save boats to 'My Boatshed'
Cost Of Ownership
Alternatively,
- Register with Facebook
- Register with Google
Why Boatshed?
View all of your boats statistics in real time
Create a virtual "watch" on boats you're interested in
Refer a boat and earn up to 20% of the brokers commission
Language & Currency
Search our catalog, go direct, enter a boat reference, essex smack 29, motivated seller-reduced price, £ 23,000.00 reduced.
- Boat REF# · 311467
- Length · 8.90m
- Year · 1993
- Construction · GRP
- Underwater profile · Long Keel
- Sleeping berths · 4
- Engine · 1 x diesel 10hp, Yanmar GM10 (1993)
- Lying · Milford Haven
Boatshed Wales
- Watch in My Boatshed
- Print Print spec sheet Print Boat Photos
- Specification
- Additional Information
Extra Details
Gaff rigged Tyrell & Young Wood spars (1993) with Galvanised standing rigging (2009)
Topsail is on separate yard Wykham furling gear included but not fitted Like new sails cover
Electrical Systems
12 volt battery, 2 batteries charged by: engine
Construction
Two oil lamps fitted and working
Accommodation
The sink is supplied by a manual brass pump, note there is no drain
2 burner paraffin Stove
2 sheet winches 2 anchors (CQR & Fishermans) 25.00m of chain The boat comes with full custom cover made for the boat in 2018 at a value of £3,000.
Nav Equipment
AIS Rader reflector
Safety Equipment
2 bilge pumps (1 manual / 1 electric)
Firefighting equipment
Broker's Comments
We are delighted to present this beautiful Essex Smack. Built in 1993 with GRP hull on to Iroko decks with bulwarks, capping rail and rubbing strake she has all the beauty of an old classic with sweeping lines, tapered stern and sheer bow.
The rig is gaff-cutter set with an extensive sails wardrobe, sails are original but show in a good state of repair. The mast and all standing rigging has been inspected on a regular basis and all necessary maintenance attended to. The decks are well maintained, sealed and solid.
Propulsion comes from a simple Yanmar GM10 unit, sufficient for berthing/mooring duties. The engine is in good working order.
A traditional yacht in every sense, this boat really does stand out from the rest. Beautiful to look at, equally pleasurable to sail.
Please feel free to email or call for further information.
These boat details are subject to contract. Note: Offers on the asking price may be considered.
Please note this comments section is public . Please do not post your personal details here. To enquire about purchasing this boat, please contact the broker directly at [email protected] Please read our commenting guidelines before posting.
Get Access to More
View unlimited photos of every boat
Walkthrough videos
VR 720° experiences
Get notified of new boats of your interest
Personalised boat recommendations
Save boats to 'My Boatshed'
James Kimpton
Cost of ownership.
Yachting Monthly
- Digital edition
Traditional seamanship on an oyster smack
- Toby Heppell
- September 14, 2021
Toby Heppell heads to the East Coast to sail a traditional oyster smack and put his dredging skills to the test
Oyster Smacks made up much of the traditional fishing fleet around the Essex coast. Credit: Colm O'Laoi
Sailing skills: traditional seamanship on an oyster smack
The muddy rivers, tributaries and estuaries of the UK’s East Coast provide the perfect breeding ground for any number of bivalves, but oysters are the foodstuff for which the area has long been known for.
The traditional fishing fleet around the Essex coast was long made up of a plethora of oyster smacks.
In truth, these boats didn’t just fish for the oysters now prized the world over, their crews instead filling their ship’s bellies with a variety of fresh fish and racing up the Thames to be the first to deliver their catch to London.
Many different boats fished the Essex estuaries and further out into the North Sea, and some still survive today.
In addition to the oyster smacks, you also have the famous Thames barges, but there are the smaller bawleys, shrimpers and others besides.
Though their professional fishing days are long since over, those that survive continue to sail on the East Coast, keeping traditions alive from the days when good seamanship could be the which I was told would be followed difference between life and death in the cold North Sea, or fetching an acceptable price for your cargo in London.
I grew up in the Essex town of Brightlingsea and, though I raced dinghies and yachts very different to these tan-sailed old girls, I have fond memories of waking early each September to watch the start of the annual Smack and Barge Match.
It was something of a town tradition where sleepy-eyed families would sit and watch the preposterously over canvased boats set off from the Pyefleet River.
Despite these memories, as a youngster this was as close as I came to the boats and, even after my parents elected to sell their cruiser/racer and purchase one of the remaining oyster smacks years after I had left home, I had still spent little time familiarising myself with them.
With endless sails to set on an oyster smack, there is plenty of work for the crew
This year, however, a planned trip back east was set to take place during the weekend of the Smack and Barge Match, and estuaries of the UK’s East Coast provide the perfect breeding ground for any number of bivalves, but oysters are the foodstuff for which the area has long been known for.
In truth, these boats didn’t just fish for the oysters now prized the world over, their crew instead filling their ship’s bellies with a variety of fresh fish and racing up the Thames to be the first to deliver their catch to London.
In addition to smacks you also have the famous Thames barges, but there are the smaller bawleys, shrimpers and others besides.
Though their professional fishing days are long since over, those that survive continue to sail on the East Coast, keeping traditions alive from the days on the Sunday by an Oyster Dredging Match.
The jib topsail (top right), a free-flying sail, is set from the bowsprit to the topmast. The topsail (far top left) is set between the gaff and the topmast
I jumped at the chance to step aboard for the weekend, packed my dirtiest sailing waterproofs – for this would be muddy work, I was told – and set off with a view to steeping myself in the traditions of my home town.
My parent’s boat, My Alice , is one of several oyster smacks still racing regularly in the region.
As with many old boats her history is a chequered one.
When she was no longer able to fish under sail, her rigging was removed, she had an engine stuck in her, her transom removed, a wheelhouse added and spent several ignominious years trawling under motor.
Finally, she was run down by a commercial ship and left to rot, as so many of the traditional East Coast fleet were.
That was until boat builder Jim Dines faithfully restored her.
He had his work cut out, however, and the project took him nine years.
He completely replanked her, one plank at a time, copying what was there; her keels, sternpost, deadwoods, keelson and stem were all rebuilt in massive West African opepe.
Her sawn oak frames were all restored or replaced, also in sawn oak.
A new deck was fitted using two layers of glass-covered ply.
Dines also managed to track down the original sail drawings and managed to keep as much as possible of the original so the boat remains predominantly the same one that was drawn up by Charles Kidby in 1907.
A world of canvas aboard an oyster smack
For those of us used to a Bermudan rigged yacht or dinghy, oyster smack rigging can be disorientating, with mast and mainsail being the only familiar words.
This is a world where canvas is king, so in addition to the gaff-rigged mainsail, there is a topsail, working sail, jib topsail, stay sail, water sail and, really, any number of others that can be variously flown either from spars or free-flying.
My Alice ’s history is not an unusual one and though now there is significant interest in keeping these old boats alive, years of neglect for most have seen rebuilds to varying degrees.
This all begs the question: how traditional should a traditional oyster smack be?
Oyster smack, Maria , here well heeled, will almost certainly have her leeward rail in the water. Credit: Colm O’Laoi
The smacks, along with their bigger sisters, the Thames barges, are known for their tan sails, for example, but back in their fishing days, when they were raced for sport as well as necessity, many think they would have used white sails and only tarred them to give them their tan colour to help with longevity either when they were tired or set to be used exclusively for fishing.
As such, it could be considered to be just as traditional to race an oyster smack in the modern era with white sails if you wish but this is frowned upon.
And this is just one small glimpse into a world you soon discover is fraught with minor controversies.
The fleet’s aim generally is to sail as close as possible within the traditions of their forebears, though concessions to modernity are accepted in many cases.
Ropes and purchase
Modern ropes are accepted but there is a tacit understanding they are not brightly coloured.
Their higher breaking strength does make for something of a safer (and easier on the hands) experience.
Blocks are almost all still wooden, though most use a Handy Billy – a series or purchases with attachments at either end – for hauling in those last few inches of sheet, which are, more often than not, modern blocks.
Balancing act
With a great deal of sail in the sky, a full-length keel and relatively small rudder, balance is everything in the oyster smack world.
To the untrained eye, the mainsail looks vastly overpowered and with the boom sitting some feet over the stern, this single sail alone creates significant, overwhelming weather helm .
However, a 22ft bowsprit from which two headsails can be flown helps balance things, as does a working sail, essentially a jib or genoa, which is also placed forward of the mast .
Even with three foresails flying, the boats are still liable to rounding up, with the gaff rig further exacerbating the problem by keeping a good portion of the mainsail well aft.
To counter this, most smacks set up with the mast raked forward in an attempt to get the peak of the gaff, its highest point, and so the centre of effort, further forward to provide better balance.
Oyster smack Peace sails past East Mersea Stone on the River Blackwater in Essex, watching by a crowd of spectators. Credit: Colm O’Laoi
In order to achieve this, there is a system for hoisting the mainsail (I quickly learn there is a specific system for everything).
The gaff is raised in line with the boom until the jaws are at their highest point before the gaff peak can be fully raised.
These are simply made off at the mast and then a hardener – purchase systems, one for each halyard , eight in total, which run down the rigging on either side of the boat – is used to provide tension.
It all takes some time to achieve and that is before you move on to hoisting the other four sails, which are typically used for upwind sailing.
Each must be hoisted in order, made off and tightened on its own hardener. It is tiring work.
Continues below…
Seamanship in small harbours: how to moor safely
On exposed coasts, wave action in small harbours can be surprisingly violent. Ken Endean examines mooring tactics
10 seamanship skills every skipper should master
The 10 common mistakes..and how to avoid them. We ask the experts about the skills every good skipper should have…
Sailing in waves: top tips to keep you safe at speed
Sailing in waves can make for a jarring, juddering experience and long, uncomfortable passages and at worst, a dangerous, boat-rolling…
Boat photos: how to take an amazing shot of your yacht
Getting a decent boat photo or a shot of action on board can be tricky. Yachting Monthly photographer Richard Langdon…
With so much weight, I quickly discover that the boats hold their way extremely well.
So it is better, even when racing, not to rush a hoist but to get it set right.
The difference between a sail being up for an extra minute is tiny in terms of hull speed but the likelihood of something going wrong in a rush, with so much rope, so many systems and so many sails is high.
Although modern ropes are used where safety demands, nods to tradition keep many of them as close to traditional as possible.
As such, once all sails are flying the next task is to keep sneaking tension into a variety of halyards and standing rigging.
This is all amongst the usual sail trimming and runner adjustment – two of these per side, one for the main mast and one for the top mast from which the jib topsail and topsail are flown.
Courses may be long for the Smack and Barge Match with legs of several miles, but the distance is eaten up in the hoisting and tightening of sails until a mark is reached and it is time to set off again, changing the sail plan and hoisting yet more new sails which seem to endlessly appear from below decks.
In the end, our race was difficult with a fault in the topsail on My Alice preventing it being flown, leaving us at least one sail down.
This was something of a blessing towards the end of the day when some serious gusts saw many of those carrying a topsail well over on their ear, but did not help with speed, and we finished the day a respectable third.
The art of dredging
I had raced these kind of boats once before the weekend and, as a racer at heart, knew broadly what to expect from the day.
The oyster dredging to come was sure to be something of a novelty, however.
Dredging the seabed under sail sounded like it would be a true test of seamanship and I was certainly moving into a totally new territory here.
The annual dredging match takes place off East Mersea and appears to be awash with rules and tradition.
We set out from Brightlingsea early Sunday morning (with a few sore heads from the match prizegiving the previous night) and got straight into the now familiar practice of hoisting sails as I’m taken through the plan for the day.
One of the two dredges waiting to be thrown over the side
There are two criteria by which all boats are to be judged.
Firstly, there will be exactly two hours within which to dredge for oysters.
Each boat’s haul will then be examined, with only native oysters counted, any other detritus or rock oysters need to be discarded.
As such, a key (and deeply mucky task) is to sort through each dredge haul and return anything that is not a native back from whence it came.
Happily, we have something of a ringer aboard in the form of Bram Haward, whose family owns the beds we will be dredging.
His ancestors have been seeding the beds and dredging oysters on the coast for generations.
The second criteria by which all boats will be judged is seamanship skills and how well an oyster smack is sailed – something much more in my wheelhouse… or at least something I can better understand.
Sorting native oysters from rock oysters in a messy job
The dredges used vary from boat to boat, but are broadly metal framed, with a net on the frame and another metal pole to hold the base flat.
Essentially you have an inverted wedge surrounded by net within which to catch your haul.
The dredging takes place within a specified area, defined by four buoys, one for each corner of the ‘box’.
There are judges on the water to determine how well each boat is being sailed and to police the boundary and make sure no one is dredging outside the specified area.
The box is set broadly perpendicular to the wind so theoretically it is a beam reach in either direction.
With the number of boats taking part and a small area within which dredging can take place, the task is to dredge in one direction, raise your haul and then hot-foot it back across the box while sorting the oysters.
Dredging may only be done in one direction and this is determined by the ‘lead’ boat – one entrant who is selected to decide which way they think is favourable for dredging.
Hauling in a dredge filled with oysters, slipper limpets, starfish and much more besides
As with many things in this fleet exactly how this works is vague at best, but the lead boat does have an identifying flag so it is a question of waiting for them to set up their dredges.
The rest of fleet must then follow by setting them up on the same side.
Shortly before the match is set to begin, we see the lead boat setting their dredges to starboard, thus dictating we will also be sailing on starboard tack for the dredging.
There are several tricks to dredging under sail.
Boat speed needs to be kept to a constant of roughly 3 knots; too fast and the dredges will bounce over the bed, too slow and you will not make enough forward motion to keep way on the boat and remain in control.
You also need to consider that the dredges set on the windward side act as a kedge and so will rotate the boat into the wind.
It’s fairly light for the dredging match itself so we are carrying a full main.
In normal circumstances this would necessitate plenty of sail forward of the mast; however, with limited hands on sail trim and the need to quickly turn around and get back to the other side of the box between each dredging run, fewer sails enable you to be much more nimble and so more efficient.
Dredging under sail is all about controlling boat speed
There are several different techniques employed by the different teams but all broadly follow the same principle.
A jib is set from the bowsprit and cross sheeted onto the windward side of the boat. This helps to both force the bow away from the wind and slow the boat.
The mainsail is then used for power, filling and spilling to control speed and prevent luffing. It’s in effect a heave-to setup, but the skipper must fight to keep the oyster smack footing to maintain some way and prevent a dead stop which would see the boat slipping to leeward.
It’s a fine balance and, with the box set with a slight bias so starboard tack is a tighter reach much of the fleet find themselves struggling to reach the end of the boxed area, instead slipping out of the leeward boundary.
With the boundary reached it is all hands to the ropes as dredges are quickly hauled in, the contents deposited on deck and the sorters, under Bram’s watchful eye, get busy identifying natives from rocks.
For those not in the know, a native oyster is usually smaller than a rock, with one side of the shell flat and the other domed, where Rocks have a more pronounced dome on either side and can grow very big indeed.
Natives are the most highly prized for their flavour and are very season dependent – the season starting in September hence the date for this traditional match.
This identifying might be an easy task in the fishmongers but amongst the mud and debris and often with various barnacles and limpets attached to their shells, it’s no mean feat sorting the catch.
Slowing the oyster smack down
Happily, after being found wanting in the identification department, I’m put to work sailing.
With three crew forward, the trick is to tack or gybe onto the jib, hoist the working toesail and hot foot it back to where we began before quickly dropping the toesail and tacking onto the jib for a second run.
With plenty of tension in the flying jib, she sets relatively flat, which works well in the conditions but as the wind builds many start to ease the halyard for their jib causing it to become fuller and so work harder to pull the bow downwind and do more to slow the boat’s forward progress.
All of this counters the power developed by the mainsail.
Back to the future
I thought I would gain respect for the fishing skills of traditional fishermen, but what I came away with was the realisation that to be a skilful fisherman at the turn of the last century was to be a skilful sailor.
Indeed, it was from these East Coast fishermen that many of the J-Class yachts drew their crews.
The skills to get the boats to London in good time are one and the same as those needed to land a good haul.
These smacks are less forgiving than modern yachts, but as such, they really bring home the importance of working with, rather than against your canvas.
Getting a balanced sail plan, especially when reducing sail, with the right halyard tension, sail depth and sheet trim will make a big difference to the amount of heel, weather helm, speed and comfort on board.
Get these out of kilter and you’ll be fighting the helm and sailing slowly.
The Essex Smack
Every boat is different to sail but sailing an oyster smack requires some specific skills that are increasingly lost on a more modern craft.
So sought after were the skills of these sailors, they were often called up for racing duties by rich owners elsewhere.
Many were relied on as key members of crew on J-Class yachts during the heady days of the early 20th-century America’s Cup.
Anyone who has sailed a long-keeled boat will be familiar with the particular skills required to sail one.
With their very deep full-length keels, relatively small, shapeless rudders hung aft of the keel, manoeuvring a heavy smack under steering alone is a very tricky thing indeed.
As such, a great deal of skill and understanding of sail control and balance are key in order to enable the boats to sail well.
The lines of the oyster smack, My Alice
This control comes from understanding setup and balance.
When looking at the boats beam-on the first thing you notice is how far forward the main mast sits – not to mention how short the mast seems.
But the sail plan needs to be looked at in the context of all spars.
Typically smacks have a bowsprit that extends almost half the length of the hull again.
As such, My Alice is around 46ft bow to stern but her length over spars is nudging over 70ft.
The gaff-rigged main means the centre of effort for the mainsail sits much further aft than a Bermudan rig would.
It does not take that much thought to realise that with significant sail forward of the bow (at least two sails are usually flown from the bowsprit upwind) and the mainsail sitting over the stern that balancing these forces is the key to ensuring the boat sails in a straight line or is able to turn.
Interestingly, however, these overhanging spars make a long-keeler much closer to a fin-keeled modern yacht than you may imagine.
In essence, when sailing a fin-keeled yacht, you can easily use foresails and the mainsail to get the boat to pivot around the mast and keel on the sails alone.
What the overhanging spars do is provide a greater amount of sail fore and aft of the keel, despite it running the full length of the hull.
All this is necessity in a smack where low speed manoeuvring under sail was key when they were being used for fishing or dredging, and enables the boats to be manoeuvred with little way on, despite the rudder doing very little at low speeds.
- Boats for Sale
- Custom Boats
- East Coast Fishing Smack
Boats similar to Custom Boats East Coast Fishing Smack
Boat not available.
Custom Boats East Coast Fishing Smack for sale in Essex United Kingdom
Essex United Kingdom
Make & Model
Custom Boats East Coast Fishing Smack
DESCRIPTION
Similar locations.
- Custom Boats in United Kingdom
- Boats in United Kingdom
VIDEO
COMMENTS
United Kingdom. £23,000 GBP. Tax paid / included. 1993 | 8.90m | Diesel | Sail. View details. All boats from Boatshed. Contact Seller. Search all our new or used Essex Smack for sale. We have Essex Smack brokers and sellers from around the world at great prices.
SOLD! 8,70 x 2,60 x 1,20 m. 5,000 kg. 10.50 m. The Essex Smack 28 ft is derived from an English 'East Coast Fishing Smack' built in polyester by Tyrell & Young Boatbuilders. She is very heavy built (at least 5,000 kg.) And suitable for sea voyages. This Essex Smack 28 ft was refitted in 2006: the entire interior has been renewed, the ...
The CSPS accepts no liability in listing vessels for sale and prospective parties should first satisfy themselves as to the condition and clear title of a vessel before proceeding with a purchase. ELECTRON CK36 GBP 35,000. All enquiries to the owner Andy Abraham [email protected]. Electron is berthed in our smackdock in Brightlingsea ...
MJ LEWIS & SON (boat sales) Ltd. Downs Road Boatyard 19A Downs Road Maldon, Essex CM9 5HG Telephone: 01621 859373 Mobile: 07885 859373 Email: [email protected]
Neyland, Pembrokeshire, United Kingdom. Boatshed Wales. 1998 Maxum 2800 SCR. £30,000. Cardiff, Cardiff. Boatshed Wales. More from this Broker View Dealer Website. View pictures & full details of Essex Smack 29, a Cruiser built in 1993 by Essex Smack 29 and available for sale.
Find more information and images about the boat and contact the seller or search more boats for sale on YachtWorld. ... Essex Smack: Model: 29: Class: Cruiser: Length: 29.20ft: Fuel Type: Diesel: Hull Material: Fiberglass: Offered By: Boatshed Wales: Description. 1993 Essex Smack 29.
8 Weeks Sailing Per Year From Just €6,452. Dream Yacht Charter's Dream Easy Buyba... Used 1993 Essex Smack 29 for sale in Milford Haven, United Kingdom. Priced at 23,000 GBP.
View the broad range of Essex Smack for sale in your area on offer in your area, review the detailed information about each vessel, compare prices, and uncover the best Essex Smack deals 1870 Essex Smack for sale
View pictures & full details of a Antique and Classic built in 1999 by Custom Essex Smack Yacht 29 and available for sale. ... 1999 Custom Essex Smack Yacht 29. €60,000 (£53,082) Palma, Spain. 1 / 43. Image coming soon. Image coming soon.
PRIMROSE is an Essex smack, a fishing vessel of timber carvel construction, iroko on sawn oak frames. She was built in 1892 by Aldous of Brightlingsea and is powered by sail alone. The vessel was built for fishing and oyster dredging from West Mersea and then Maldon. She was saved in the 1970s from the Roach and rebuilt by Testers of Faversham ...
New and used Essex Smack boats for sale from Boatshed - The online boat trader network supplying used sailboats, used yachts for sale, pontoon boats and fishing boat for sale
Essex Smack. Essex Smack for sale on DailyBoats.com are listed for a range of prices, valued from $33,143 on the more basic models to $34,348 for the most expensive . The boats can differ in size from 8.9 m to 10.7 m. The oldest one built in 1870 year. This page features Essex Smack boats located in countries: United Kingdom.
1993 Essex Smack 29 for sale. Used 1993 Essex Smack 29 for sale with the beautiful name "Essex Smack 29" is located in Milford Haven (Wales, United Kingdom).This vessel was designed and built by the Essex Smack shipyard in 1993. Key features 1993 Essex Smack 29: length 8.9 meters, beam 2.59 meters, boat displacement 5,590 kilograms and max boat draft 1 meter.
Register with Boatshed to see 41 extra photos of this Essex Smack 29 GRP Hull. This traditional style Essex Smack has a GRP hull. The hull is from a mould taken of an original 1932 wooden Essex Smack designed by J W Suttlewood. Professionally built, the hull was moulded by International Marine Design and the decks and fit out were by Martham ...
This Essex Oyster Smack was fully rebuilt in 2004 by Dan Tester a respected shipwright who has refurbished and rebuilt a number of Essex Smacks in recent years. Commissioned in 2005 she was in reality a new boat; a 100% rebuild. ... How to prepare your boat for sale . [email protected] +44 (0)1621 744842 We sell more boats than any other ...
Browse various Custom Essex Smack Yacht 29 boats for sale, Rightboat.com offers thousands of boats for sale listed by trusted brokers from around the World View over 1000s of new and used boats for sale and yachts for charter online.
1983 36ft GRP Smack Yacht by Tyrell & Young, Beta 50hp diesel with just over 400 hours, great set of Ivory sails, recently re-sprayed and ready for the season! Built in 1983. GRP construction with encapsulated long keel. Decks of GRP sheathed marine ply. Aft cockpit, tiller steering, gaff cutter rig.
Essex Smack 29 for sale | 8.90m | 1993 | 1x diesel 10hp | GRP Construction | Long keel underwater profile | 4 berths | Boat REF# 311467. ... At all times, where the particulars herein give details of a new boat and/or a new boat to be supplied/built by a builder/manufacturer, or a boat to be chartered, via our introduction, we do not guarantee ...
A world of canvas aboard an oyster smack. For those of us used to a Bermudan rigged yacht or dinghy, oyster smack rigging can be disorientating, with mast and mainsail being the only familiar words. This is a world where canvas is king, so in addition to the gaff-rigged mainsail, there is a topsail, working sail, jib topsail, stay sail, water ...
Essex Smack 29 for sale with Boatshed Wales - https://wales.boatshed.com/essex_smack_29-boat-311467.html Photos and video taken by Boatshed Wales
Sailing Yachts: For Sale: 1870 Essex Oyster Smack Isle of Wight Isle of Wight. Boats for sale: International > Europe > UK. View 4810 boats for sale in the United States Advanced Search. UK ☰ Place an ...
Buy sailing boats Essex Smack. Sailing boats Essex Smack for sale on DailyBoats.com are listed for a range of prices, valued from $33,143 on the more basic models to $34,348 for the most expensive. The boats can differ in size from 8.9 m to 10.7 m. The oldest one built in 1870 year. This page features Essex Smack boats located in countries ...
View over 1000s of new and used boats and yachts for sale online. Buy a boat, Sell or list your boat for rent or sale, find berths, and more. Boats For Sale ... Custom Boats East Coast Fishing Smack for sale in Essex United Kingdom . LOCATION. Essex United Kingdom. LENGTH. 43.01 ft. DETAILS. Condition. Used. Make & Model. Custom Boats East ...