plan catamaran rc

• Classifieds
• Remember Me Forgot Password?
•   Boats Racing Boats - Internal Combustion Build Log 48 inch Catamaran Build

• Electric Flight
• Advertising
• Our Sponsors
• Review Policies
• Terms of Service
• Privacy Policy
• Site History
• Mark Forums Read
• Member Search
• Upcoming Articles
• Do Not Sell My Data
• Manage Consent
• Back to Top

RC Catamaran Boat + VIDEO

Introduction: RC Catamaran Boat + VIDEO

I decided to build a device that could travel along the water at my control and was very stable that I could put a gopro on and take above and underwater photography

...So that is exactly what I built

Hopefully this instructable will guide you through the steps that went into creating this

Note that this was my first project involving RC so forgive my minimal knowledge of the subject

Step 1: Why a Catamaran?

A catamaran is "a multihulled watercraft consisting of two parallel hulls of equal size."

This means that the craft is much wider than a monohull vessel, allowing it to be more stable in the water

It also doesn't need a keel, so it can be in much shallower water

It doesn't need ballast to help it balance, so it is much lighter

Step 2: What You Will Need

I made the catamaran from good ol' 1/2" PVC, used standard RC electronics and RC Boat parts as well as the gopro with a corresponding clamp mount. I added pool noodles onto the pontoons for extra flotation (this proved unnecessary but it looked cool to me!)

• 6x 1/2" PVC 45 degree
• 2x lengths of 1/2" PVC
• 4x 1/2" PVC "T"
• 4x 1/2" PVC end caps
• A small plastic tub for the electronics
• 4x 1/4" galvanized bolts to hold the tub onto the frame (washers and nuts as well)
• 2x pool noodles and zip ties to hold them to the pontoons

The electronics

• An RC receiver (I stole mine from an old RC I had lying around)
• the corresponding transmitter for that receiver
• I used an hpi 15 turn brushed motor for this project and corresponding ESC I got from ebay for $15A
• servo for the rudder
• Batteries and charger (I ran two NIMH batteries in parallel for longer run times

The other hardware

• A "U" clamp of corresponding size to the diameter of your motor
• A thin steel rod to use as a prop shaft
• Orange paint

The Boat Stuff

• An RC boat prop (got mine from amazon)
• A small plastic surface to act as a rudder (and the means to connect that to the servo)

Step 3: Put It Together

I'll mash the actual construction of the thing into one step because it's not complicated at all

I don't expect you to follow exactly what I built (I wouldn't!) so please make your own variations and let me know about them in the comments

What I did in a nutshell:

• First, glue together the PVC frame as shown and paint it if you want
• Attach the plastic tub to the frame with the nuts
• Drill a hole for the prop shaft to go through and holes for the "U" bolt motor mount
• Attach the motor inside the U bolt and tighten it, connect the motor shaft to the prop shaft and put the prop on
• Install the servo and the push rod for the rudder along the prop stabilization bar (Pic 3)
• Connect all the electronics together
• Attach pool noodle flotation device with the zip ties
• Drill a hole for that receiver's antenna and you're ready to roll (float)

Oh, and put that gopro on there somewhere

Note: If you are using your catamaran in water that is not clear, paint the prop orange that way if it gets detached somehow, it will be visible (it has actually happened to me)

Step 4: Finished Product

The project took some tests and tuning, but after a little time getting it to work, I had a nice vehicle and got what I wanted

Thanks for reading and I hope you made something similar (probably better)

Step 5: Video

The video shows the catamaran's basic functions, in the future I will make on-board videos

Attachments

Participated in the Photography Tips and Tricks Contest

Recommendations

Fix It Contest

All Things Pi Contest

Engineering in the Kitchen - Autodesk Design & Make - Student Contest

• Best RC Boat Plans

Immerse yourself in the exciting world of RC boat Plans. 

A Voyage through RC Boat History

Since the earliest days of humankind, water vessels have captivated our imaginations. But in the last century, the thrill of sailing transitioned from vast open oceans to the comforts of our backyards with the evolution of Radio-Controlled (RC) boats . This shift marks an intriguing juncture in our maritime journey. Let’s embark on a voyage through the rich history of RC boats.

• The Dawn of Radio Control: Before RC boats could set sail, radio control technology needed to be invented and refined. The early 20th century saw the emergence of basic remote-controlled devices. As technology advanced post World War II, the application of radio control in hobbyist models began to gain traction.
• The 1950s – Birth of a Hobby:  By the 1950s, the basic principles of radio control were established, allowing enthusiasts to construct their transmitters, receivers, and servos. During this era, the first hobby-grade RC boats started to appear. These early models, often handcrafted from wood or metal, were powered by rudimentary electric or gas engines.
• The 1970s – Commercial Rise: With technological advancements and increasing interest, the 1970s marked a boom in the commercial availability of RC boats. Companies started producing ready-to-run models, kits, and accessories, making it easier for hobbyists to dive into RC boating.
• The 1980s and 90s The Golden Age: With the miniaturization of electronics and improvements in battery technology, the late 20th century was truly the golden age of RC boating. Boats became faster, more durable and even began to mimic real-life counterparts with astonishing accuracy. Racing competitions became popular, further fuelling the growth and innovation in the industry.
• 21st Century – Technological Renaissance: The turn of the century saw increased RC boat diversity. There was an RC model for every maritime enthusiast, from jet boats to sailboats, submarines to hovercrafts. Digital technology allowed for more precise controls, brushless motors offered greater power, and lithium batteries extended run times. Moreover, the advent of 3D printing has given hobbyists the freedom to craft custom parts, further pushing the boundaries of design and functionality.
• Today – A Community Afloat: RC boating is more than just a hobby—it’s a thriving community. Online forums, social media groups, and real-world meet-ups provide enthusiasts platforms to share designs and trade tips and celebrate the joy of sailing on a miniature scale.

In conclusion, the journey of RC boats mirrors the journey of human innovation. From humble beginnings to today’s sophisticated models, RC boats are a testament to our enduring fascination with water and our relentless pursuit of technological progress. As we look to the future, one can only imagine where the tides of innovation will take this beloved hobby next.

Crafting Your RC Boat: Beyond the Purchase

There’s an unmistakable charm in holding a sleek, miniature boat, knowing that you’ve created it. While the market is brimming with ready-to-sail RC boats , crafting your own has a deeper allure. Building an RC boat isn’t just about assembling parts; it’s about imprinting yourself in the creation. Let’s craft an RC boat, moving beyond just purchasing one off the shelf.

• The Thrill of Personal Touch: When you craft your RC boat, every curve, every paint stroke, and every tiny detail becomes an extension of your personality. It’s not merely an object; it’s a testament to your vision, patience, and craftsmanship. Manufacturers’ designs or color schemes do not limit you. Your boat, your rules.
• The Learning Curve: Beyond the allure of customization lies the rewarding challenge of the build. Understanding buoyancy dynamics, propulsion systems’ intricacies, or weight distribution nuances offers a hands-on educational experience. Every challenge faced and overcome adds to your repertoire of skills and knowledge.
• Economics of DIY: While investing in tools and materials might seem costly upfront compared to a ready-to-run model, DIY can be more economical in the long run. With the know-how, repairs, upgrades, or even fleet building becomes significantly cheaper.
• Unraveling Creativity: Crafting your boat gives you the canvas to experiment. Want a hybrid of a speedboat and a yacht? Or perhaps a unique paint job that’s never been seen before? When you’re the builder, the only limit is your imagination.
• Sustainability and Upcycling: DIY allows for sustainable choices. Old materials can find new life in your creations. That discarded piece of wood? It could be your boat’s deck. An old plastic container? It’s your boat’s hull waiting to be shaped.
• Emotional Bonding: The bond you share with something you’ve created from scratch is unparalleled. Every trial and error, every success and setback in the building process, weaves a unique story. The result is not just a boat; it’s a chronicle of your journey.
• Community Engagement: Building your RC boat opens doors to a vibrant community of like-minded enthusiasts. Sharing build logs, seeking advice, and showcasing your creation fosters connections, camaraderie, and collective growth.

While buying an RC boat offers instant gratification, building one provides a deeper, more enriching experience. It’s an endeavor that transcends the act of mere assembly. Crafting your RC boat is about embracing challenges, exploring creativity, and ultimately, basking in the unparalleled satisfaction of watching your vision come to life on the water. So, are you ready to set sail on this crafting adventure?

The Role of a Detailed Plan

A dream without a plan is just a wish. Understand the importance of a meticulous RC boat plan that serves as a roadmap, guiding hobbyists through every twist and turn of the boat-building journey, ensuring a masterpiece upon completion.

Understanding the Basics of RC Boats

Every journey begins with understanding the basics, and the world of RC boats is no different. Before delving into the complexities of RC boat plans , it’s essential to grasp what makes these miniature marvels tick.

The Essence of an RC Boat

Radio Controlled boats are more than just toys; they are a culmination of engineering, design, and passion. These miniature boats operated remotely offer hobbyists a chance to sail, race, and even perform stunts on water surfaces without actually being on the boat.

Core Components: From Hull to Rudder

The beauty of an RC boat lies in its components, each playing a pivotal role:

• Hull: The boat’s body design can vary based on the boat type, affecting its speed, stability, and overall performance.
• Motor: The heart of the RC boat. Depending on the model, it could be electric, nitro-powered, or gas-powered.
• Rudder: This steering device helps in navigating the boat. Positioned at the boat’s stern, it directs the water flow, guiding the boat’s direction.
• Propeller: Transforms the motor’s power into thrust, propelling the boat forward.
• Radio Transmitter and Receiver: The primary tools for communication. The transmitter sends signals, which the receiver on the boat catches, leading to action.
• Battery: Powers the motor and other electronic components. It determines the boat’s runtime.

Charting Different Waters: Types of RC Boat Plans

Just as in the real world, RC boats come in a variety of designs, each tailored for specific activities:

• Sailboats: Powered primarily by sails, they require a deep understanding of wind patterns.
• Racing Boats: Built for speed. They boast streamlined designs and powerful motors.
• Scale Boats: Miniature replicas of real-world boats, focusing on intricate details and aesthetics.
• Submarines: Yes, there are RC submarines too! Designed to dive and resurface, offering a unique experience.
• Tug Boats: Strong and sturdy, often used for pulling or pushing other boats.

By understanding these basics, you’re not just one step closer to building your own RC boat but also appreciating the intricate marvels of these miniature vessels.

Why Choose DIY RC Boat Plans?

While there’s no shortage of ready-to-sail RC boats on the market, the allure of crafting one from scratch is an unmatched experience. Let’s examine why   boat plans  are an irresistible choice for enthusiasts.

Crafting with Passion and Precision

Building an RC boat from a plan is not just assembling parts; it’s an artistic endeavor. It’s about:

• Involvement: Every cut, every screw, every adjustment—you’re involved in each step, understanding the nuances and intricacies of your boat.
• Learning Curve: With each challenge you face and overcome, you learn. Be it understanding materials, aerodynamics, or electronics, the learning never stops.
• Satisfaction: The sense of accomplishment when your handcrafted boat first hits the water is unparalleled. It’s a testament to your dedication and hard work.

The Uniqueness of Customization

When you choose a DIY approach:

• Personal Touch: Your boat will never be just another model. From color choices to design tweaks, it’ll reflect your personality.
• Modifications: Want a faster motor? A sleeker design? With DIY, you’re the master of modifications, not restricted by pre-made designs.
• Innovations: As you grow as a hobbyist, you can incorporate new technologies or features, making your boat a continuous creation project.

Saving Bucks: DIY vs. Pre-made Models

Beyond the passion and customization, there’s a practical advantage:

• Cost-Effective: Building from scratch can be more wallet-friendly. You decide where to splurge and where to save.
• Maintenance: Understanding your boat inside-out means you’re better equipped to handle repairs, potentially saving on maintenance costs.
• Upgrade Path: Instead of buying a new model for an upgrade, you can make incremental changes to your boat, spreading out costs and getting what you want.

In closing, choosing a DIY RC boat plan isn’t just about building a boat; it’s about creating an experience, memories, and skills that last a lifetime.

Essential Tools and Materials for Your RC Boat Blueprint

Crafting an RC boat from a blueprint isn’t just an exercise in creativity; it requires a precise set of tools and the right materials. Let’s break down what you’ll need to make your dream RC boat a reality.

Assembling Your Toolkit: Must-haves for Hobbyists

Before you embark on your boat-building journey, ensure you have these tools at your disposal:

• Cutting Tools: Precision knives, saws, and scissors are essential for detailed cuts.
• Measuring Tools: Rulers, calipers, and protractors to ensure exact dimensions.
• Soldering Kit : For connecting electronic components securely.
• Sandpaper : Different grits for smoothing surfaces.
• Clamps and Vices : To hold components securely during assembly or drying.
• Glues and Adhesives : Wood glue, epoxy, and super glue cater to bonding needs.
• Screwdrivers and Pliers : For those tiny screws and intricate fittings.
• Paint Brushes and Sprayers : For that impeccable finish.

Wood vs. Plastic: What Suits Your Vision?

The primary material you choose will define your boat’s aesthetics, performance, and durability:

• Pros: Offers a classic, authentic look. It’s also easy to shape and modify.
• Cons: Requires more maintenance to prevent water damage.
• Popular Choices: Balsa, plywood, and mahogany are among the favorites.
• Pros: Durable and resistant to water damage. Lightweight and versatile.
• Cons: It might lack the “authentic” feel of wood.
• Types: ABS plastic and polystyrene are commonly used.

Powering Your Craft: Motors and Electronics

The heart and brain of your RC boat:

• Motors: Choose based on desired speed and performance.
• Electric: Quiet and efficient, great for general use.
• Nitro: High-speed performance but requires fuel.
• Gas: Suitable for larger models, offers extended run time.
• Batteries: Capacity and type determine run time. LiPo batteries are famous for their power-to-weight ratio.
• Radio System: Consists of a transmitter (the remote) and a receiver (on the boat). Ensure they’re compatible.
• Servos: These convert radio signals into motion, controlling rudders and sails.

Safety First: Gearing Up Right

Safety is paramount, both during the building process and while sailing:

• Goggles: Protect your eyes from flying debris.
• Gloves: Safeguard against cuts and chemical exposures.
• Ventilation: When using adhesives or paint, ensure good airflow.
• Fire Safety: Especially important when soldering or working with electronics.
• First Aid Kit: For any minor injuries during the crafting process.
• Water Safety: Always retrieve your boat safely. Consider a retrieval boat or a fishing line.

Remember, while the right tools and materials are pivotal, your passion and commitment are crucial in building an RC boat. 

Dive into Popular RC Boat Plans for Hobbyists

Whether you’re just starting or have spent years mastering the art, an RC boat plan is tailored for you. Let’s explore options based on skill level, ensuring every hobbyist finds their perfect match.

Plans Tailored to Your Expertise

It’s essential to choose a plan that aligns with your expertise. Doing so not only ensures a smoother building process but also helps in mastering skills progressively.

Setting Sail: Beginner-Friendly Designs

Just dipping your toes in the RC boat world ? Here are designs tailored for newcomers:

• Simple Tugboats: Their sturdy design makes them forgiving for novices. They focus more on buoyancy and balance rather than speed.
• Basic Sailboats: Have a sail, a rudder, and a hull. These help beginners understand wind dynamics without the complexities of motors.
• Monohull Speedboats: While speed might be in the name, beginner versions are more about straight-line stability than breaking records.

Tip: Look for plans that prioritize minimal parts and straightforward assembly instructions.

Navigating Deeper Waters: Intermediate Plans

Once you’ve got the basics down, it’s time to challenge yourself a bit:

• Dual-Hull Catamarans: With two hulls, these boats offer better stability at higher speeds—a balance between complexity and performance.
• Scale Models: Replicas of real-world boats. While they might be simple in mechanics, the attention to detail can be a fun challenge.
• Nitro-powered Speedboats: Introducing a nitro engine adds complexity in both assembly and maintenance, perfect for hobbyists looking to level up.

Tip: At this stage, focus on plans that offer customization options, allowing you to tweak based on personal preferences.

The Captain’s Challenge: Advanced Blueprints

For those who’ve conquered the seas and are looking for their next big challenge:

• Detailed Warships: Not only do these require intricate detailing, but they also incorporate advanced features like firing cannons or rotating turrets.
• Submarines: The challenge here is not just in the build but also in mastering buoyancy and underwater navigation.
• Hydroplane Racers: These boats sit atop the water, making their dynamics and balance a real test for builders.

Tip: Advanced plans often assume a certain level of expertise.  Ensure you’re comfortable with terminology and techniques before diving in.

Choosing the right plan is crucial, but remember, the journey of building an RC boat is as rewarding as the destination. So, pick a blueprint that excites you and set sail on your boat-building adventure!

Step-by-Step Guide to Building Your Dream RC Boat

Building your RC boat is a journey; like all great journeys, it requires a roadmap. Here’s your step-by-step guide to ensure smooth sailing from start to finish.

Deciphering Your RC Boat Plan

Every great build starts with understanding the blueprint.

• Study the Plan: Before anything else, familiarize yourself with the overall design, components, and terminology.
• List Materials and Tools: List all materials you’ll need based on the plan. Ensure you also have the right tools.
• Understand the Sequence: Some plans have a specific sequence for better efficiency. It’s always good to follow the recommended order.

Crafting the Perfect Hull

It’s crucial to get this part right.

• Select Your Material: Be it wood or plastic, ensure it aligns with your vision and the boat’s purpose.
• Cutting and Shaping: Using the dimensions from your plan, begin cutting out the hull shape. Sand down edges for a smooth finish.
• Assembling the Hull: If your boat has multiple hull pieces, now’s the time to assemble. Use clamps to hold parts together while the adhesive dries.
• Reinforcing: Depending on the design, you might need to support the hull with internal ribs or bulkheads for added strength.

Power Dynamics: Motor and Electronics Installation

Your boat’s heart and brain come to life in this step.

• Selecting a Motor : Choose based on your boat’s size and desired speed. Electric motors are standard, but nitro and gas are options for speed enthusiasts.
• Mounting the Motor : Securely attach the motor to the hull, ensuring it aligns perfectly with the propeller’s location.
• Installing the Electronics : Place the receiver, ensuring it’s well-protected from water. Connect it to the motor and, if applicable, to the rudder servo.
• Testing : Before sealing everything up, run a quick test. Ensure the motor runs smoothly and that the rudder responds to the transmitter.

The Final Touch: Paint and Finish

It is where your boat truly comes to life aesthetically.

• Priming: Before painting, apply a primer. It ensures better paint adherence and offers additional protection to the hull.
• Painting: Choose paints suitable for your material. Consider using bright colors for visibility. Multiple thin coats often work best.
• Decorative Details: If you’re creating a scale model or want added flair, now’s the time to add decals or any other decorative details.
• Sealing: Once everything’s dry, apply a sealant to protect against water and UV damage. It enhances durability and ensures longevity.

With these steps, your dream RC boat should be ready to make waves. Remember, patience and precision are essential.

The success of your RC boat build lies not only in the core steps of the process but also in the finer details and approaches you adopt. Here are some tips to ensure your blueprint turns into a successful RC boat.

Tips to Ensure Your RC Boat Blueprint’s Success

While passion drives the creation of your RC boat, a few guiding principles can make the difference between a good boat and a great one.

Precision and Patience: Keys to Perfection

The meticulousness you put into your project defines its outcome:

• Double Check Measurements: Always measure twice and cut once. This age-old adage holds especially true for intricate builds like RC boats.
• Avoid Rushing: While eagerness to see the finished product is natural, rushing can lead to mistakes. Take your time, especially during crucial steps like gluing or electronics installation.
• Invest in Quality Tools: Quality tools lead to quality work. Ensure your tools are sharp, clean, and well-maintained.
• Seek Feedback: If you’re part of an RC hobbyist community, don’t hesitate to share your progress and ask for feedback. Fresh eyes can spot potential issues.

Testing the Waters: Functional and Buoyant Checks

Before you officially launch, a few tests can prevent potential mishaps:

• Dry Run:  Test all electronics outside of the water first. Ensure motors run and that the rudder responds to commands.
• Buoyancy Test:  Place the boat in shallow water to check its buoyancy. Ensure there are no leaks and it sits on the water as intended.
• Control Range Test: With your boat in water, test the range of your transmitter. Ensure you maintain control even at farther distances.
• Safety Check: Especially for speedboats, ensure all components are firmly attached, and there’s no risk of parts coming loose during operation.

Long Journeys: Maintenance for Longevity

Your boat’s lifespan depends on the care it receives:

• Regular Cleaning: After each use, clean your boat. Remove any debris, especially from the propeller and rudder.
• Dry Thoroughly: Ensure your boat is dry before storage to prevent mold or structural damage.
• Battery Care: If using rechargeable batteries, store them partially charged. Avoid over-discharging, and check for damage regularly.
• Inspect and Repair: Inspect your boat for damage, especially after accidents. Address any issues promptly.
• Update Components: As technology advances, consider updating parts of your boat, like the motor or radio system, for enhanced performance.

By following these tips and keeping a meticulous approach, your RC boat blueprint will come to life and sail smoothly for years. Enjoy the journey and the destination!

RC boat building can be as much about navigating through challenges as it is about the joy of the finished product. Let’s delve into some common issues hobbyists face and how to address them:

Navigating Challenges in RC Boat Building

Every project has its fair share of hurdles. Recognizing potential pitfalls and knowing how to overcome them can make your boat-building journey smoother.

Common Hiccups and Their Solutions

• Warped Materials: Especially with wood, warping can occur by storing materials flat and in a controlled environment. Gentle bending or weighting can help straighten things if you encounter minor distortion.
• Drying Delays: Sometimes, adhesives or paints take longer to dry. Always check manufacturer recommendations and be patient. If in a humid environment, consider using a dehumidifier.
• Electronics Failure: Always test electronics before integrating. Ensure there’s no water infiltration and connections are secure.

Mistakes in Plan Interpretation and Corrections

• Misreading Dimensions: Double-check all measurements against the plan before making cuts. If a piece is cut wrong, it’s often best to replace it rather than try to adapt it.
• Incorrect Sequence : If you realize you’ve missed a step or done things out of order, evaluate if it’s possible to revert. Sometimes, working backward can resolve the error without starting over.
• Overlooking Details: Always cross off steps as you go. If a detail needs to be included, see if it can be added later without disrupting the already-completed work.

Overcoming Assembly Bottlenecks

• Alignment Issues : If elements don’t align, check for warping or mistakes in cuts.
• Component Integration: Commercial components (like motors) may sometimes need a better fit. Consider slight modifications, but ensure you don’t compromise the component’s function.
• Difficulty in Securing Parts: Use clamps or weights to hold pieces in place as glues dry. Always ensure the workspace is level.

Troubleshooting 101: Addressing RC Boat Glitches

• Boat Doesn’t Respond: First, check the transmitter’s battery. Then, ensure the boat’s battery is charged, and connections are secure.
• Motor Runs but Boat Doesn’t Move:  Check the connection between the motor and propeller. Ensure there’s no debris caught in the propeller.
• Boat Lists or Sinks: Check for water in the hull. If there’s a leak, dry the boat and identify the source. Seal any gaps or holes.
• Loss of Signal at Short Distance: Ensure the receiver’s antenna isn’t damaged or submerged. Sometimes, interference from other electronics can be the culprit.

Remember, every challenge offers a learning opportunity. By methodically troubleshooting issues and seeking advice when needed, you’ll have a functional RC boat and gain a wealth of experience to apply in future projects. 

Building an RC boat is much more than just following instructions—it’s an artistic endeavor that marries precision, patience, and passion. Like every journey, it’s marked by challenges and joys. So, as we dock at the conclusion harbor, let’s reflect on what we’ve explored.

The Harbor of Satisfaction: Reflecting on Your Build

Completing an RC boat is an achievement that mirrors the countless hours spent refining, understanding, and creating. Your finished boat is a testament to your craftsmanship and your learning journey. Mistakes made along the way have transformed into invaluable lessons, and triumphs have become cherished memories.

Every time your boat slices through the water, it’s not just propelling forward; it’s carrying the weight of your dedication, echoing your problem-solving grit, and reflecting the beauty of your vision. It’s a piece of art, a science project, and a toy; all melded into one.

The Ever-evolving World of RC Boat Plans

The world of RC boats is ever-dynamic. With advancing technology and evolving design philosophies, new plans and models continually emerge, offering hobbyists endless avenues to explore. It ensures that the world of RC boat building remains fresh, exciting, and continuously challenging.

Whether you’re a beginner setting sail on your first project or a seasoned hobbyist who’s navigated many waters, there’s always a new horizon waiting. And with every new plan comes a fresh wave of learning, creativity, and satisfaction.

In essence, RC boat building is a confluence of art, science, and emotion. It’s not just about the destination but also the journey. As you stand at the shore, watching your creation glide seamlessly, remember it’s not just the boat that’s set sail but also a piece of your heart. Here’s to many more builds, many more sails, and many more stories! Safe and happy sailing!

Join Our Fleet of Passionate Boat Builders!

Your boat-building journey doesn’t have to end here. The most beautiful part of this hobby is the community we build around it. So, why sail solo when we can navigate the waters together?

• Share Your Blueprints : Have an RC boat plan that you’re proud of? A unique design or an innovative approach? Please share it with us! We’d love to see the diverse range of creative genius our readers bring.
• Chronicle Your Experiences: Whether it’s a challenging hiccup you overcame or a triumphant first sail, your stories can inspire, educate, and entertain fellow hobbyists.
• Personal Hacks and Tips: Discovered a shortcut? Found a unique material or method? Please share your hacks, and let’s all benefit from collective wisdom.

Engage, Discuss, Connect

The true essence of any hobby lies in its community. Let’s spark discussions, ask questions, seek advice, and celebrate achievements. Whether you’re an RC boat rookie or a seasoned sailor, your insights and inquiries add value.

Set Sail Together in Our Passionate Community

Remember, every boat tells a story, and every builder has the wisdom to share. By creating a space where we can collectively share our journeys, we’re not just building boats but making connections.

Click below to join our vibrant community, share your story, and embark on new adventures with fellow enthusiasts!

• Wooden Glen L Boat Plans
• Drift Boat Plans The Ultimate River Runner
• Jon Boat Plans Your Guide to Dream Vessel
• Top Tips Plywood Boat Plans Reviewed
• Model Boat Plans Reviewed And Explained
• Best Pontoon Boat Plans
• The Best Wooden Boat Plans for Beginners
• The Best Cedar Strip Canoe Kits and Plans
• Kayak Plans for The Amateur Builder
• Sailboat Plans A Fine Place To Start
• Aluminum Boat Plans Reviewed
• Canoe Plans in Traditional and Modern Styles,

• Gardening Gloves
• Garden Spade Shovels
• String Trimmers

How To Clean a Leather Purse: The Expert’s Guide to Maintaining Your Bag’s Beauty

How to clean candle wax off floor: a safe and effective guide for hardwood floors, how to propagate prayer plant: a step-by-step guide to success, how to get slime out of carpet: effective methods for removing slime – a step-by-step guide, 19+unusually gorgeous baby girl room ideas, 19+ baby boy room decor ideas & plans [pictures], 17+ master bathroom remodeling decor ideas [pictures], 21+ basement kitchen ideas & plans [pictures].

14+ DIY Remote Control (RC) Boat Plans [FREE]

My nephew and I had been wanting to build a remote control boat for a while. We finally got around to it one weekend, and it was a lot of fun.

Table of Contents

We started by choosing the right boat. We wanted something small and easy to control, so we went with a basic monohull design. We also chose an electric motor, since they’re less powerful but easier to use and maintain.

The next step was to choose the right battery. We went with a sealed lead acid battery, since they’re cheap but have shorter run times.

View this post on Instagram A post shared by Max Imagination (@max.imagination)

Once we had the boat assembled, we took it out for a test run on our local lake. The boat performed well, and my nephew had a blast steering it around.

We’ll definitely be going out again soon to enjoy some more time on the water.

Making remote control boats is a fun and rewarding hobby. The boat and its remote controls can be quickly built as a single project. This DIY project can be done by almost all people, even those that do not have any building experience.

To turn this project into something extraordinary, the internals of the watercraft need to be mechanically designed and built with care to ensure durability.

DIY Remote Control Boat Ideas & Designs

1. home-made remote control boat.

If you’re thinking of making a remote control boat, there are a few things you need to consider. The first is the size of the boat. You’ll need to take into account the dimensions of your pond or lake, as well as the wind conditions. If you’re going to be sailing in open water, you’ll need a larger boat that can handle choppy conditions.

2. Remote Control Boat With Fusion360

The second factor is the type of motor. There are two main types of motors for remote control boats: electric and gasoline. Gasoline motors are more powerful, but they’re also more expensive and require more maintenance. Electric motors are less powerful but easier to use and maintain. 

3. Remote Control Knex Boat

The third factor is the type of battery. Again, there are two main types: sealed lead acid (SLA) and lithium ion (Li-ion). SLA batteries are cheaper but have shorter run times, while Li-ion batteries are more expensive but have longer run times. When choosing a battery, you’ll need to take into account how long you want to be able to run your boat for.

4. Remote Control Airboats for Kids

Finally, you need to consider the type of controller you’ll use. There are two main types: radio controlled (RC) and infrared (IR). RC controllers use radio waves to communicate with the boat, while IR controllers use infrared light. IR controllers are typically cheaper, but they have shorter range than RC controllers.

5. Building a Self-Driving Boat

Radio-controlled (RC) boats are a fun and exciting hobby for people of all ages. Whether you’re interested in racing or simply exploring the waterways, there’s an RC boat out there that’s perfect for you. But with so many different types and models to choose from, how do you know which one is right for your needs?

6. DIY Arduino Catamaran

One of the most important things to consider is the size of the boat. RC boats come in a variety of sizes, from small bathtub toys to full-sized racing hulls. If you’re just starting out, it’s probably best to choose a smaller boat that you can easily control. As you become more experienced, you can move up to larger boats with more powerful motors.

7. How to Make a DIY Remote Control Airboat

Another important factor to consider is the type of hull. The two most common hull types are monohulls and catamarans. Monohulls are traditional boats with a single hull, while catamarans have two separate hulls connected by a platform. Catamarans are generally faster and more stable than monohulls, making them ideal for racing. However, they can be more difficult to control, so they may not be the best choice for beginners.

8. How To Make Remote Control Boat at Home

When choosing an RC boat, it’s important to think about what you want to use it for. Are you interested in racing? Or do you simply want to cruise around your local lake? Once you know how you want to use your RC boat, it will be much easier to narrow down your choices and find the perfect one for your needs.

9. How To Make a Mini RC Boat

RC boats are a great way to have fun on the water. Whether you’re racing against friends or just exploring your local lake, these little boats can provide hours of enjoyment. Here are some tips for getting the most out of your RC boat:

Choose the right boat. There are a variety of RC boats on the market, from simple dinghies to high-speed racers. Pick one that suits your needs and Preferences.

10. How to Make a Remote Control Boat

Get familiar with the controls. Before you take your boat out on the water, make sure you understand how to operate the controls. This will help you avoid collisions and other accidents.

Practice makes perfect. Don’t be afraid to experiment with your boat in different conditions. The more you practice, the better you’ll become at handling it.

11. How To Make a Fast RC Boat

4. Have fun! Ultimately, that’s what RC boating is all about. So relax and enjoy yourself!

How to make a remote control boat

1. design and prepare the shape of the boat.

Design and prepare the shape of your boat. The design needs to be planned before any building can take place. Deciding on the design early can ensure that it will be built correctly. Work on a plan for at least one week to get your ideas together.

The simplest way to design the design is to draw on paper using pencils or markers. A more professional method would use Computer-Aided Design (CAD) software which can help with the design process.

2. Design the electronics

Now that the boat’s shape is done, it is time to design the electronics. Please list all your components and decide the best way to put them together. Remember, this task does not have to be complicated and can be completed with ease by following these easy steps:

3) Design & install the onboard controls

Now that you have designed your electronics, it is time to work on the onboard controls. Again, design your electronics to serve the purpose that you want them to.

4) Assemble the electronics for testing and troubleshooting.

Once you have designed all of your electronics, it’s time to sell them together so you can test them before you do any soldering on the boat itself. This step is essential to prevent unexpected problems while building the boat itself.

5) Assemble and install electronics into the boat hull.

Before wiring can be done inside the boat, the electrical tape should be wrapped around all exposed wire connections. This keeps wires from shorting out because they are touching each other while assembled in the boat’s hull.

6) Wire the electronics to their respective locations.

Now that the electronics have been assembled, connected, and wrapped in electrical tape, it is time to wire them into the boat. Begin wiring by starting with a power source of some sort, typically a battery pack. These are easily installed later, so do not worry if your boat will not have one.

7) Assemble the motor, wiring, and electronics onto the boat hull.

Next, it is time to assemble the motor and wiring onto the boat. This is a simple process. The size of your boat will determine how difficult this will be for you. Use your hands to firmly push the motor into place with the wires running through it to ensure that it does not fall off during this process or any after-step.

8) Install float switch and ignition circuit.

The next step is to install the float switch and ignition circuit. The float switch should be placed on top of the motor, as seen in the picture, so that a slight current can pass through it from one side to the other.

9) Install steering controls and electronics onto the boat hull.

It is time to install the steering controls and electronics onto the boat. This step is not a complicated process but will require some force as you push parts into place.

Apply electrical tape to any electrical connections as needed during this step. Once all connections have been made and secured, you can begin wiring inside the boat.

10) Install propeller into boat hull and wiring.

The next step is to install a propeller onto your craft, with wires running through it to prevent any accidental shorts or touching of wires causing damage during use.

Next, wire your electronics for remote operation before proceeding with this step due to potential battery issues that may arise later on in the operation of your watercraft.

Tips for keeping your remote control boat in good condition

Remote control boats are a great way to enjoy the water and have some fun, but they require some basic maintenance to keep them in good condition. Here are a few tips:

• Rinse off your boat after every use. This will help to remove any salt or other chemicals that could damage the paint or other parts of the boat.
• Store your boat in a dry place when not in use. This will help to prevent rust and corrosion.
• Check the batteries regularly and replace them as needed. This will ensure that your boat has enough power to run properly.
• Inspect the hull of your boat regularly for cracks or other damage. This will help you to identify any potential problems before they become serious.

By following these simple tips, you can keep your remote control boat in good condition and enjoy it for many years to come.

So there you have it, the basics of building your remote control boat from scratch. It is not as complicated as it may seem and can be easily accomplished by anyone who decides to build one of these boats.

These are just some basic steps in making a remote control boat, and there are many more ways to make your unique model that others will recognize for years to come.

Hi, my name’s Elena Coolidge. I’m a DIY enthusiast who loves building fun woodworking plans. These DIY plans are fun hobby projects for enthusiasts or even more advanced builders that want to build things like bunk beds, end tables or even a duck box!

RELATED ARTICLES MORE FROM AUTHOR

• Post Sitemap
• Privacy Policy
• Terms of Service

• Electric Boats

Zelos 36" Twin Brushless Catamaran RTR

Selected Store

Product details, quick links, product downloads, instruction manual, key features.

• Powerful Twin, 36mm x 62mm counter-rotating brushless 6-Pole, 2000Kv motors
• Two 120-AMP (6S LiPo compatible) Brushless Water-cooled ESCs
• Capable of reaching speeds in excess of 60 MPH with recommended 6S LiPo batteries
• Authoritative high-torque metal gear steering servo
• Precision catamaran hull
• Fiberglass canopy
• Stainless steel propellers
• Spektrum™ DX2E Transmitter
• Waterproof electronics
• Boat stand included

Video Overview

Needed To Complete

• (2) 2S 50C LiPos or (2) 3S with EC5™ Connector
• Li-po Battery Charger.
• AA batteries for included transmitter

The thrill of the chase has always been synonymous with the world of high-speed RC catamarans and the Zelos™ 36 Twin catamaran was built to give you the advantage. Thanks to a double dose of speed, the Zelos can reach pulse-pounding speeds over 60mph. By the time your competition realizes what hit them; they’ll be in your wake thanks to not one, but two insanely powerful counter-rotating 2000Kv brushless motors. From tip to rudder, the Zelos is built for the long haul with a hand-laid fiberglass build that can hold up to aggressive speeds and delivers a dominating driving experience that is second to none. Get yours and experience all the diabolical competition crushing speed you crave.

Product Specifications

Club points information.

Horizon Hobby RC Club:

The points displayed are points you will earn based on your membership level and the cost value of the product. Be sure you are Signed In to your account to see the most accurate points you will earn on your purchase. Points are awarded and available for use once your order has shipped complete.

2000 points = $5 Discount

Points displayed here do not include Bonus Points for select product. If the product is marked with the Bonus Points badge you will also earn the extra "Bonus Points" points listed in the banner in addition to the calculated points displayed

Enter your email address to Subscribe.

• Model Showroom
• Parts & Accessories
• Batteries & Chargers

Power and Style with A New Look

Extreme Power and Speed

M41 Catamaran lets you select your battery and speed level!

Select the right traxxas id battery to fit your needs from the options below.

Choose your charging option with M41 Catamaran!

Traxxas id auto battery identification makes charging simple.

Optional telemetry components let you monitor your model's speed,

Temperature, and other parameters from your android or apple ios device.

Ready-To-Race ® The Traxxas DCB M41 Widebody comes fully assembled with a TQi™ 2.4 GHz radio system, Velineon brushless power system, applied graphics, and detailed instructions. Traxxas backs the M41 and all of our products with industry-leading support that is second to none. A staff of skilled representatives is on-hand to answer your questions via phone, website, or e-mail. Unmatched parts support allows M41 to be serviced with parts and support from thousands of hobby dealers worldwide. Traxxas protects your investment with the Lifetime Electronics Warranty. Traxxas goes the extra mile to ensure that your RC experience is easy, fun, and fast!

MODEL 57046-4: Fully assembled, Ready-To-Race ® Catamaran, TQi™ 2.4 GHz radio system, Traxxas Stability Management,™ Velineon ® 540XL Brushless Motor, VXL-6s Marine ESC,  and factory-applied graphics.

* Batteries and charger sold separately

Log in or Sign up

You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser .

Open Source 13-15m Catamaran Plans

Discussion in ' Projects & Proposals ' started by archie1492 , Jan 3, 2018 .

archie1492 Junior Member

Dear all, I want to create a detailed building information model for a 13 - 15 meter catamaran that is capable of being CNC cut and assembled. I need some help finding plans I can use as a basis of design. Specifically, I need the hull profile information. Section cuts through the hull will give me the ideal contours for a boat of this size. Can someone help? After weeks of searching, I still cannot find these online. For now, this is merely an exercise in my 3d modeling capability. I'd like to share my drawing work with the forum if I can get some assistance to start off. There are future possibilities I am also considering. I'm an experienced Architect & construction designer with a strong background in computer aided design. Once I've modeled the boat in 3d, I would like to flatten the various parts and create plans for the individual boat parts to be CNC cut. I would like to build a small scale model first (1:2o or perhaps 1:10) with the ultimate goal of building the boat full scale.  

TANSL Senior Member

This is a very simple catamaran which, if you are interested, I can give you a lot of information. It is not a spectacular boat but it can help you in your first steps with boats. LOA = 16 m, Lbp = 14.6 m  

Thanks I really appreciate it. The hull lines for the motor cat you've provided are not quite what i'm looking for. I'm specifically looking for the hull lines for a 14m catamaran sail boat. I guess there is some standard for these contours especially the area below the waterline. Check the attached document as well if anyone is interested in this.  

Attached Files:

catdimension.pdf

I'm sorry, you never specified that it was a sailing catamaran. I thought that to carry out your purposes, " For now, this is merely an exercise in my 3d modeling capability ", any model was valid. Apparently, you have different purposes than, in addition to, to practice with 3D models. The better you clarify what you are really looking for, the better someone can help you.  

Hi all, Here's an example of what kind of information I need to get started. Optimising Hull Lines for Performance https://www.graingerdesigns.net/the-lab/optimising-hull-lines-for-performance/ The boat shown here is a 8.5m cat sailboat. I'm looking for something a bit larger in the 14m range. Also, the images only show one of the hull profiles. I'd like profile lines for the entire boat. I will post some other images I've found online showing profile lines for smaller boats. I still cannot find any 14m hull lines. Can anyone help?  

grainger_1488019480.jpg

Grainger_1488019410.jpg, grainger_1488019333.jpg, grainger_1488019265.jpg, grainger_1488019219.jpg.

Here are some other hull lines I've found online. Hope this is useful to anyone else looking for this information. Thanks!  

Evergreen Lines small.jpg

Hull-lines.jpg, shark-20.jpg.

You could take any of those boats and scaleb the lines to get the desired length. Since it is only a 3D modeling exercise, you do not have to worry about anything else. You could even make a mix of 2 or 3 of those models to get the one you are looking for.  

Thanks Tansl, I'd like to make the boat drawings accurate for the 14m size. Perhaps one day I will develop this into something worth building full scale. The more accurate I can draw the boat, the more I will learn about the boat design.  

Maybe it does not look like it but I would like to help you. If you do not find what you want on the Internet I could draw a lines plan, strictly following your instructions, which would help you to make the 3D model. Or, if you find something similar on the internet I can adapt it to your needs and fill in the information that you indicate you need for your work. I insist that starting from the shapes of a 10 m boat you can get the shapes of a boat of 14 m, with total accuracy.  

Dolfiman Senior Member

archie1492 said: ↑ I'd like to make the boat drawings accurate for the 14m size. Perhaps one day I will develop this into something worth building full scale. The more accurate I can draw the boat, the more I will learn about the boat design. Click to expand...

Cata 14m with Gene-Hull UE Catamaran 2.3_2018 01 15.ods

Gene-Hull Catamaran 2.3 User Guide_2018 01 16.pdf

Hull for cata 14m with Gene-Hull UE Catamaran 2.3_2018 01 16.pdf

Dolfiman, thanks so much! This is exactly what I was looking for. It's very interesting and probably a bit over my head at this point. I think this should work for modeling the basic hull shape. For the bridge deck and all of the stuff above the hull I can model this with a bit more creativity. Although, I'd like to learn more about understanding the center of gravity for the boat and the proper location of the mast. Are there any rules of thumb about this? Thanks again!  

archie1492 said: ↑ I think this should work for modeling the basic hull shape. Click to expand...

Cata 14m V2 with Gene-Hull UE Catamaran 2.3_2018 01 15.ods

In complement to illustrate this first approach, my good friend Alain did some 3D views here attached of the hull V2 version with Multisurf (using fit for purpose ouput data in section 5. of the above file). To inspire you , some other examples of cata, more sport/day sailer oriented than the Saona 47 : - R/P 45 (Reichel-Pugh) : multihull http://reichel-pugh.com/tag/multihull/ - Dazcat 1295 : in this video, from 1:45 the launch, you can see the hulls from various angles https://www.youtube.com/watch?v=0BZF4Udda5E - SIG 45 (VPLP design) : from 1:20 you can see the winward hull fully lifted ​  

dean 1962 New Member

archie1492 said: ↑ Dear all, I want to create a detailed building information model for a 13 - 15 meter catamaran that is capable of being CNC cut and assembled. I need some help finding plans I can use as a basis of design. Specifically, I need the hull profile information. Section cuts through the hull will give me the ideal contours for a boat of this size. Can someone help? After weeks of searching, I still cannot find these online. For now, this is merely an exercise in my 3d modeling capability. I'd like to share my drawing work with the forum if I can get some assistance to start off. There are future possibilities I am also considering. I'm an experienced Architect & construction designer with a strong background in computer aided design. Once I've modeled the boat in 3d, I would like to flatten the various parts and create plans for the individual boat parts to be CNC cut. I would like to build a small scale model first (1:2o or perhaps 1:10) with the ultimate goal of building the boat full scale. Click to expand...

• Advertisement:

Archie, I have been looking to do the same thing. Where are you at on the project? Very interested in hearing all about it. Thanks.  

The Open Trawler Project!

• No, create an account now.
• Yes, my password is:
• Forgot your password?

Sign In or Create Account

Forgot password.

If you don't receive the email within an hour (and you've checked your Spam folder), email us as [email protected].

LATEST NEWS  FROM OTHER BUILDERS  

RETURN TO HOME / INDEX PAGE

Sign In for the best experience.

Create an account here.

• Find a Wishlist
• Order Status
• View My Points
• Return Shipping Instructions
• Shipping, Billing and Returns

Free Shipping on Orders Over $99 Learn More

Your cart is empty Continue Shopping now!

• RC Boat Marina

Catamaran Boats

Catamarans are among the most stable RC boats you can drive. Pro Boat combines that stability with high power to create some of the fastest boats in our lineup!

• Discontinued  Refine by Discontinued Items: Discontinued included
• In Stock  Refine by In Stock: true
• Ready-To-Run Refine by Completion Level: Ready-To-Run (2)
• Blackjack Refine by Family Name: Blackjack (1)
• Veles Refine by Family Name: Veles (1)
• Pro Boat Refine by Brand: Pro Boat (2)
• Refine by Color: Black
• Refine by Color: White
• Catamaran Refine by Hull Type: Catamaran (2)
• Large Refine by Boat Size: Large (1)
• Standard Refine by Boat Size: Standard (1)
• Brushless Refine by Motor Type: Brushless (2)

Catamaran RC Boats

The catamaran hulled-boats are the most stable and fastest in any line-up. Pro Boat has a great range of RC catamarans and they are all influenced by the fastest race boats that compete in the ‘Class One’ category of offshore powerboats. The full-sized catamarans have twin outboard engines boasting more that 1000hp and are able to reach speeds in excess of 160mph. With a little tuning, you would be amazed to know that some Pro Boat RC catamarans have reached speeds in excess of 100mph – and at a fraction of the cost!

The catamaran hull designs are noted for having less volume, lighter displacement and shallower draft – which means less of the boat is in the water compared to monohull boats. Affectionally referred to as ‘Cats,’ these boats have two parallel sponsons of equal size that run along the outer edges of the hull. The two sponsons combined have a smaller hydrodynamic resistance than a monohull and the wider stance on the water can reduce both heeling and wave-induced motion.

When setting up your Pro Boat RC catamaran you will often hear people referring to the boat ‘running too wet’ which basically means it isn’t getting out of the water enough. A catamaran is designed to almost sit on top of the water and if it is unable to lift itself out of the water then it will run slower and handle poorly.

The Pro Boat designers and engineers have been heavily influenced by the full-sized Class One race boats and that has created three very exciting RC catamarans for the main high-speed part of the Pro Boat range. Available in three hull-lengths from 24” to 42” these are also some of the biggest RC boats in the range.

Let’s start with the biggest, and that is the ample Blackjack 42” 8S brushless RC catamaran. This is large scale RC racing at its most fun! The Spektrum Marine 4685 4-Pole, water-cooled motor produces over 5hp and will ensure this big boat can reach speeds of over 55mph! Smart technology throughout, this boat looks a little intimidating at first but within minutes you’ll feel right at home and find yourself pushing harder and harder to get those truly exciting speeds. It has an impact-resistant polycarbonate hull with a clean moulded composite interior. This RC boat is simple to work on and a joy to use.

The Blackjack 42” has a little brother, and that’s the Blackjack 24”. This 24” brushless RC catamaran can run on 2S or 3S LiPo batteries, can hit 30mph and is a great introduction into the world of catamaran RC boats. The distinctive red trim has great visibility on the water and looks very stylish too. This Blackjack is certainly not a gamble – always bet on red.

Between the two Blackjack cats, we have the Veles. This 29” RC catamaran is a pocket rocket. The 2000KV motor can propel this boat to 50mph+ on 6S power. It has a hand-laid fibreglass composite hull that has a very dynamic design with sharp lines and aggressive angles. The Veles 29” RC catamaran is fast and fun, whether you’re a beginner or intermediate RC boater.